MacrossJunkie Posted Thursday at 06:05 AM Posted Thursday at 06:05 AM Unlike the YamArcadia version, the intake covers can come off. Quote
davidwhangchoi Posted Thursday at 06:08 AM Posted Thursday at 06:08 AM 58 minutes ago, MKT said: Well ok, this thing is still alive. is this thing capable of high speed mode? will the wings retract? Quote
rsvictor1976 Posted Thursday at 06:28 AM Posted Thursday at 06:28 AM (edited) 1 hour ago, MKT said: Well ok, this thing is still alive. From the third picture, you can barely see a panel where missiles are supposed to pop out from its lets. I wonder if the shoulders will open up to reveal the speakers. Edited Thursday at 06:29 AM by rsvictor1976 Quote
Chronocidal Posted Thursday at 06:55 AM Posted Thursday at 06:55 AM (edited) That's... interesting, at least. Obviously not a transforming prototype, they're pulling the same shenanigans they did with the VF-31s being solid models for so long. Can't really predict anything about how the hips/LEX/fuselage are going to transform, but you can tell it's based on the YF-19 mold (same stupid bulgy panel under the nose with the opposite curvature, because of course they're going to double down on the worst-looking aspects as if they're some kind of trademark). I'd actually love them to curve the LEX more, like they did with the HG kit, so it intersects further behind the cockpit. Still looks like the same rough shape as the Yamato/Arcadia design, which.. why bother at that point? Try something different already. I can see where it'll be a similar comparison to the fighter mode differences though, and I'll be happy to grab as many VF-19 variants as I can, provided they actually make them. Will probably wind up a similarly more skinny battroid at the end of the day. They still need to make the canards angle up further. I'm going to go against the grain though, and say just nix most of the tampo, especially the intake markings, or just print them in either a different color, or an outline only. They look entirely out of place, and clash horribly with the red plastic. 49 minutes ago, davidwhangchoi said: is this thing capable of high speed mode? will the wings retract? Boy I hope not. Edited Thursday at 06:57 AM by Chronocidal Quote
Graham Posted Thursday at 07:15 AM Posted Thursday at 07:15 AM 57 minutes ago, davidwhangchoi said: is this thing capable of high speed mode? will the wings retract? I bloody well hope not! It's so poorly implemented in both the Arcadia and Bandai versions of the YF-19 toy, which causes several issues. And more importantly, the VF-19 Fire Valk, was never shown in the anime has having a high speed mode.. Quote
Graham Posted Thursday at 07:17 AM Posted Thursday at 07:17 AM I'll buy at least two of these, but I'm more exited about potential VF-19F/S/P versions. The VF-19F/S Blazer Valks are one of my top favorite VFs after the VF-17D/S Nightmare. Quote
Graham Posted Thursday at 07:27 AM Posted Thursday at 07:27 AM I've gotta say that even though I just recently bought the Arcadia VF-19 Fire Valk, as my old Yamato versions had all broken elbows, I'm actually as a huge Macross 7 fan super excited for a Bandai DX version. Of course, as a Macross 7 fan I'd be even more excited for a Bandai DX or HMR VF-17D/S (my all time favorite VF.....Gamlin rules!), a VF-19S/F and VF-22S Max & Millia. Quote
Chronocidal Posted Thursday at 07:45 AM Posted Thursday at 07:45 AM (edited) 29 minutes ago, Graham said: I bloody well hope not! It's so poorly implemented in both the Arcadia and Bandai versions of the YF-19 toy, which causes several issues. And more importantly, the VF-19 Fire Valk, was never shown in the anime has having a high speed mode.. I mean.. actually it's kind of worse. Remember Episode 11? This is even less physically possible than the wings folding back like the YF-19's. Edited Thursday at 07:46 AM by Chronocidal Quote
davidwhangchoi Posted Thursday at 08:03 AM Posted Thursday at 08:03 AM i'm curious if it's detailed in an issue of Macross Chronicles or somewhere if the either the VF-19 or VF-22 model Max used in M7 had the capability for high speed mode though it wasn't used in the show. Macross Frontier VF-19 advance was still capable of high speed mode. As i recall, Yamato/Arcadia only released version 3 YF-19 with high speed mode but never updated the fire valk to a version 3. Quote
davidwhangchoi Posted Thursday at 08:13 AM Posted Thursday at 08:13 AM (edited) Edit: Found Max VF-22S using high speed mode I'm going to take a leap and guess all the VF-19 models are capable of high speed mode. Edited Thursday at 08:18 AM by davidwhangchoi Quote
Hayama Kaito Posted Thursday at 08:32 AM Posted Thursday at 08:32 AM nose part may not seem that elegant like the Yamato one, but better intake detail and fixed that knee gap problem, overall big improvement for me. though at first I was expecting it as a repackaged producted since the HMR version is just like a shrink-down Yamato Quote
Chronocidal Posted Thursday at 09:07 AM Posted Thursday at 09:07 AM 41 minutes ago, davidwhangchoi said: Edit: Found Max VF-22S using high speed mode I'm going to take a leap and guess all the VF-19 models are capable of high speed mode. The YF-21/VF-22 get passes because there is nothing physically impossible about just angling the wings and tails. Real life aircraft can do that just fine, even without the fancy bendy materials the YF-21 used. I don't think the VF-22 was actually supposed to be able to do that either, but I don't know off the top of my head whether that was directly stated. There was never any evidence that the VF-19 Advance could do it though, at least not in the few seconds of footage it was shown in. Bandai just did it because that release was a sneaky way to get an alternate license to make a YF-19 to compete with Arcadia. The high speed mode as seen in the animation is physically impossible, just like the way Basara folded back the wings on the Fire Valk in that pic above. The wings only ever rotated on their main pivots, and would have to pass directly through the legs and arms. The only toys that ever did this were the Doyusha 1/144 die cast ones, because they didn't have to transform. Was the YF-19 supposed to have the same flexible morphing materials the YF-21 did? Who knows. But the way the wings are shown folding back cannot work with solid objects. I do give Arcadia and Bandai credit for trying, and appreciate that they managed to come up with a physical hinge that can relocate the wing to achieve something almost like what the animation showed. I wouldn't even mind the high speed mode being an option if anyone could mechanically execute it in a way that doesn't suck. So far, we're 0 for 2 in achieving a functional mechanism. Quote
MacrossJunkie Posted Thursday at 07:40 PM Posted Thursday at 07:40 PM 12 hours ago, Graham said: I bloody well hope not! It's so poorly implemented in both the Arcadia and Bandai versions of the YF-19 toy, which causes several issues. And more importantly, the VF-19 Fire Valk, was never shown in the anime has having a high speed mode.. Yeah, I don't see how it would work on the 19 Kai or even the S/F/P to begin with. If nothing else, the vertical stabilizers would be in the way unless they were folded back up over the legs and it just wouldn't sit or look right. It wasn't a problem on the YF-19 or VF-19 Advance since the stabilizers were on the legs themselves. Logically, it likely wouldn't have made it into the design of the S and F variants since they were optimized for space use rather than atmospheric flight and thus had little need for a high speed mode where there is essentially no drag to worry about. With the P and Kai being more or less based on the same thing but with longer wings, it probably wouldn't have carried over to those either. 10 hours ago, Chronocidal said: The YF-21/VF-22 get passes because there is nothing physically impossible about just angling the wings and tails. Real life aircraft can do that just fine, even without the fancy bendy materials the YF-21 used. I don't think the VF-22 was actually supposed to be able to do that either, but I don't know off the top of my head whether that was directly stated. There was never any evidence that the VF-19 Advance could do it though, at least not in the few seconds of footage it was shown in. Bandai just did it because that release was a sneaky way to get an alternate license to make a YF-19 to compete with Arcadia. The high speed mode as seen in the animation is physically impossible, just like the way Basara folded back the wings on the Fire Valk in that pic above. The wings only ever rotated on their main pivots, and would have to pass directly through the legs and arms. The only toys that ever did this were the Doyusha 1/144 die cast ones, because they didn't have to transform. Was the YF-19 supposed to have the same flexible morphing materials the YF-21 did? Who knows. But the way the wings are shown folding back cannot work with solid objects. I do give Arcadia and Bandai credit for trying, and appreciate that they managed to come up with a physical hinge that can relocate the wing to achieve something almost like what the animation showed. I wouldn't even mind the high speed mode being an option if anyone could mechanically execute it in a way that doesn't suck. So far, we're 0 for 2 in achieving a functional mechanism. If I recall correctly, along with the BDI, the morphing wing materials didn't make it into the VF-22 due to complexity and cost. The YF-19 was a more conventional design and never had that feature. Quote
PointBlankSniper Posted Friday at 12:31 AM Posted Friday at 12:31 AM The trailing edge near the wing root is a totally different shape on the Kai, than the flattened edge on the YF. It can't even pretend to have a high speed mode, or that rear corner would dig into the legs way deeper than the YF. That shallow backward sweep with VF-1 super parts might work though, because the root of the stabilizers can cover the rear half of the gap formed from the corner digging in, while the front half could be filled with w/e is normally hidden and overlapped by the stabilizer and wing root. The super parts could also block some of the view. The Blazer valks straight up have a bend built into the wing, so there isn't even a way to get rid of the angle that comes mid wing. Anyway, this is still in vaporware status, so wallet and FOMO are still at peace Quote
jenius Posted Friday at 12:56 AM Posted Friday at 12:56 AM Maybe have a pivot point toward the back lower end of the wing so that part could swing out toward the edge of the wing for high speed mode. Quote
Chronocidal Posted Friday at 01:40 AM Posted Friday at 01:40 AM I just don't even want them to try it, I'm sick of having to screw with the crappy mechanisms they come up with to make the wings stay in place. I would crack up if they included VF-1 fast pack mounts for it though. Quote
seti88 Posted Friday at 01:51 AM Posted Friday at 01:51 AM 20 hours ago, MKT said: Well ok, this thing is still alive. Unless bandai changes or adds different shades of red to the fuselage, that valk risks looking like a cheap knock off toy, with that large plain color. Or maybe its the shade of red that matters... Quote
Mommar Posted Friday at 02:11 AM Author Posted Friday at 02:11 AM There is zero reason to ever support high speed mode on the 19. It's just structurally unsound, and frakking stupid looking too. Quote
David Hingtgen Posted Friday at 02:38 AM Posted Friday at 02:38 AM 44 minutes ago, seti88 said: Unless bandai changes or adds different shades of red to the fuselage, that valk risks looking like a cheap knock off toy, with that large plain color. Or maybe its the shade of red that matters... Make the yellow less intense. It's not THAT insanely rich a shade on the show IIRC. They've got "fast food golden-yellow" there, which a lifetime of seeing such conditions people to associate it (especially with red) as "cheap". Quote
MKT Posted Friday at 03:59 AM Posted Friday at 03:59 AM A peek at the schematic drawing with the display. Hopefully clearer pics of it become available soon. Seeing the proportions of the legs, it looks like Bandai used their own YF-19 as the base. Not surprising, seeing how the Fighter intake sculpt also looks very similar as what I remember to their DX YF-19, plus the lack of knee gap in that mode. I wonder, if they will also have the folding shin panels as well..? Quote
Graham Posted Friday at 05:07 AM Posted Friday at 05:07 AM I so hope Bandai do a DX VF-19F and VF-19S so I can make Emerald Force. I mean I've still got my old Yamato's but but they are getting a bit loose in places and I really have to baby the elbow joints as some of them have small cracks. And the tampo printed markings on the Bandai Fire Valk look great, not too excessive like on the DX YF-19 & YF-21. Quote
Chronocidal Posted Friday at 05:09 AM Posted Friday at 05:09 AM The folding/collapsing inner leg mechanism on the YF-19 is as overly complex as it is ingenious, but it comes with a couple of annoying detriments. Primarily.. I miss being able to extend the feet in fighter mode. I like displaying fighters standing on the feet vertically, it's just a nice way to save space. Otherwise though, I think that mechanism also contributes a little to how.. sloppy the arm alignment feels. It doesn't seem to line up well, and the arms don't feel solidly attached to anything in fighter mode. They just kind of float with the shield, and it means the gunpod is also sloppy. Quote
seti88 Posted Friday at 09:16 AM Posted Friday at 09:16 AM 6 hours ago, David Hingtgen said: Make the yellow less intense. It's not THAT insanely rich a shade on the show IIRC. They've got "fast food golden-yellow" there, which a lifetime of seeing such conditions people to associate it (especially with red) as "cheap". Lol didnt think of that fast food reference before! Oh boy if only it was a happy meal toy! 🤪 at macross nald's of course...😂 Quote
David Hingtgen Posted Saturday at 12:01 AM Posted Saturday at 12:01 AM I haven't thought of Macrossnald's in years! Quote
PointBlankSniper Posted Saturday at 01:24 AM Posted Saturday at 01:24 AM Wotafa just released cam footage someone sent him of the Tamashii nation event. Not that there's anything new to see, but if anyone wants to stare at it in a pan by motion... There's also footage of the 27sp and 25 tornado. I'm too lazy to spam repost of the vid lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.