MKT Posted February 7, 2022 Posted February 7, 2022 38 minutes ago, close313 said: Ok cost jokes aside, I miss Valks toys that have wings that actually fold/transform FLAT on the back. Something Bandai era valks seem to not have anymore. So much this.. Everything from the YF-29 onwards (except 262) just have wings just hanging off too much at the back. Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 19 minutes ago, seti88 said: Macross dialect/colloquial/accent is what makes the macross world go round... Ma-Ma... Just bought a valk......took out the card and couldn't wait, pressed F5 and now is paid... Yup, its as if we could travel to the future to see how easy/hard it is. The whole arm folding on to itself is a sight to behold..(although am not sure if thats how its actually supposed to turn out?) A different type of transformation always brings an added dimension to so-called valk magic! Ah! I'm curious what Valk did you bought? As for the arm, I think that's how it is. Here's the transformation line art: Quote
seti88 Posted February 7, 2022 Posted February 7, 2022 Just now, no3Ljm said: Ah! I'm curious what Valk did you bought? As for the arm, I think that's how it is. Here's the transformation line art: Haha thats just my sing-a-long 😅...waiting for the darn 21 to pull the trigger. 😁 Delta valks aint got me yet... ah should have realised he would have had a reference to build it...doh! Cool to see it in action! Quote
Valkyrie Hunter D Posted February 7, 2022 Posted February 7, 2022 ...it's about frickin' time Arcadia! 😆 Quote
MKT Posted February 7, 2022 Posted February 7, 2022 32 minutes ago, no3Ljm said: Ah! I'm curious what Valk did you bought? As for the arm, I think that's how it is. Here's the transformation line art: Looking at the line art, it seems the person who made the 3D printed kit employed his own solutions to collapse parts of the shoulder, arms and back of legs even more to get around the anime magic for a more accurate Fighter.. It'll be interesting to see how Arcadia does this.. Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 57 minutes ago, seti88 said: Haha thats just my sing-a-long 😅...waiting for the darn 21 to pull the trigger. 😁 Delta valks aint got me yet... ah should have realised he would have had a reference to build it...doh! Cool to see it in action! I looked again on Arcadia's prototype, and it looks like the vertical fin folds and sandwiched between the forearm section compared to the 3D print above. 26 minutes ago, MKT said: Looking at the line art, it seems the person who made the 3D printed kit employed his own solutions to collapse parts of the shoulder, arms and back of legs even more to get around the anime magic for a more accurate Fighter.. It'll be interesting to see how Arcadia does this.. Yeah. It reminds me of Bandai's anime-magic on the YF-19. I'm curious too on how Arcadia is going to do this. Or they're just going to end up having separate pieces to cover the back of the legs again. Quote
seti88 Posted February 7, 2022 Posted February 7, 2022 6 minutes ago, no3Ljm said: I looked again on Arcadia's prototype, and it looks like the vertical fin folds and sandwiched between the forearm section compared to the 3D print above. Hmm maybe a prototype they couldnt gave the vertical fin flopping around, and so sandwiched in the forearm? Unless of course its some way to hide the vertical fin hinge. But it seems awkwardly too near the hand too, so i would probably put that as a prototype stick together. Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 4 minutes ago, seti88 said: Hmm maybe a prototype they couldnt gave the vertical fin flopping around, and so sandwiched in the forearm? Unless of course its some way to hide the vertical fin hinge. But it seems awkwardly too near the hand too, so i would probably put that as a prototype stick together. I think it is, 90%. Look at the arm sequence on the far right. The big image emphasizes the fin folds, and then on the smaller image the other half of the forearm. Yes, probably it's too close to the hand as per how the sizes are in physical form versus the anime-magic lineart. I'm curious too on the arm mechanism. Like how close the 3D artist did on his. On a side note though, I'll probably wait first until I see a painted prototype before deciding on getting it. I'm more on the other schemes than what they're producing. We'll see. Quote
wmkjr Posted February 7, 2022 Posted February 7, 2022 1 hour ago, MKT said: Looking at the line art, it seems the person who made the 3D printed kit employed his own solutions to collapse parts of the shoulder, arms and back of legs even more to get around the anime magic for a more accurate Fighter.. It'll be interesting to see how Arcadia does this.. He goes by Tage on the forums here. If he jumps on the forum you could ask him. Here's his thread: https://www.macrossworld.com/mwf/topic/43727-160-vf-5000-3d-printing/ Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 38 minutes ago, wmkjr said: He goes by Tage on the forums here. If he jumps on the forum you could ask him. Here's his thread: https://www.macrossworld.com/mwf/topic/43727-160-vf-5000-3d-printing/ Nice! Thanks @wmkjr! Quote
MKT Posted February 7, 2022 Posted February 7, 2022 1 hour ago, wmkjr said: He goes by Tage on the forums here. If he jumps on the forum you could ask him. Here's his thread: https://www.macrossworld.com/mwf/topic/43727-160-vf-5000-3d-printing/ Thanks.. Missed this tread earlier, had a peek in and the built process look superb! Quote
sjoebarry Posted February 7, 2022 Posted February 7, 2022 7 hours ago, MKT said: Everything from the YF-29 onwards (except 262) just have wings just hanging off too much at the back. Completely agree. It took me a while to accept that the wings out backpacks of the 25’s, 27’s, 29’s and 31’s. That flush cleanness of the VF-1’s that carried thru to the 11’s, 17’s, and 171’s I just liked more. Of all the options left of unmade Valks to choose from this 5000 is by far the best looking and I can’t wait to get my hands on one. Quote
sjoebarry Posted February 7, 2022 Posted February 7, 2022 (edited) 6 hours ago, no3Ljm said: I looked again on Arcadia's prototype, and it looks like the vertical fin folds and sandwiched between the forearm section It looks a little bit like what’s always been done for the fin on the Legioss’ arms? It folds into the forearm area on a small hinge to hide it away. Looks slightly similar on the 5000 in terms of fin location. Edited February 7, 2022 by sjoebarry Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 (edited) 3 hours ago, sjoebarry said: It looks a little bit like what’s always been done for the fin on the Legioss’ arms? It folds into the forearm area on a small hinge to hide it away. Looks slightly similar on the 5000 in terms of fin location. Yes, the location's the same. But as how the lineart goes, the fin folds first before the other half of the forearm. Basically like a sandwich. Legioss fin on the other hand swivels down. In which I believe Arcadia did on their prototype below. Edited February 7, 2022 by no3Ljm Quote
sjoebarry Posted February 7, 2022 Posted February 7, 2022 2 minutes ago, no3Ljm said: But as how the lineart goes, the fin folds first before the other half of the forearm. Basically like a sandwich. Legioss fin on the other hand swivels down. ahhh yes, i see it now zooming in. interesting. Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 43 minutes ago, sjoebarry said: ahhh yes, i see it now zooming in. interesting. Yeah. And I think @Tage most did the arm correctly expect on sandwiching the fin. There's that part he did rotate when he said clearance on the arm. Upon rewatching it, it looks like after he rotated a part, the clearance probably he was referring too is where the fin will rest after it gets sandwiched. Assuming that it's going to be the same as Arcadia, this forearm mechanism is close to the lineart. Do note, that on the third image is where he sits the fin since initially, according to him he wasn't sure how it's going to end up where. Quote
Bolt Posted February 7, 2022 Posted February 7, 2022 It will certainly be fun and interesting to experience the full transformation process. And , i know this has been whipped out every time size is a question. But here's that size chart , once again, for good ole' comparison. On that note, i trust true fans like Arcadia to get the sizing right. Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 (edited) 17 minutes ago, Bolt said: It will certainly be fun and interesting to experience the full transformation process. And , i know this has been whipped out every time size is a question. But here's that size chart , once again, for good ole' comparison. On that note, i trust true fans like Arcadia to get the sizing right. Touch smaller than VF-1, then that's not going to cost us $400+/-. But I don't think it will ever go below Y30000. Probably like the VF-4A? Y32780 MSRP. Y27000 PO price (AmiAmi). What do you guys think? Edited February 7, 2022 by no3Ljm Quote
Mechapilot77 Posted February 7, 2022 Posted February 7, 2022 when i saw this news (on my fb feed?) i was elated! a new mold from arcadia, compeltely new not a V2 like the SV-51. I HOPE the price is somewhat reasonable. this isn't a huge valk and doesn't look hugely complicated. ITs probabaly the smallest one and probably middling in terms of complexity. hoping for a price better than that of the recent sentinel legioss (i mean its bigger than that but not much and complexity is the same....but the legioss was what i consider overpriced....i still bought em but begrudging the price). Also the single "fast pack" i hope is included. That said, i wish they'd show what the first FEW decos would be. The acqua blue yellow is ok but some others seem better. either way, unless is unreasonable in price (looking at you SV-51!!) I will support this project and hope for repaints. Quote
Bolt Posted February 7, 2022 Posted February 7, 2022 For the sake of keeping Arcadia going, and happy. We need to buy this ! And it shows how much Macross fans appreciate the older designs that have been rare and hard to find. Or non existent in 1/60..! Quote
jvmacross Posted February 7, 2022 Posted February 7, 2022 Good to see Arcadia dipping back into M7 VFs....hopefully they will releae the rest of Fire Bomber Quote
sqidd Posted February 7, 2022 Posted February 7, 2022 1 hour ago, no3Ljm said: Touch smaller than VF-1, then that's not going to cost us $400+/-. But I don't think it will ever go below Y30000. Probably like the VF-4A? Y32780 MSRP. Y27000 PO price (AmiAmi). What do you guys think? Y37500 MSRP Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 11 minutes ago, sqidd said: Y37500 MSRP SV-51's discounted preorder price, huh? Hmmm. If it is, I'll just wait for Arcadia to make the color scheme I like. Quote
505thAirborne Posted February 7, 2022 Posted February 7, 2022 Dear Arcadia... please include fixed posed hands. Thank you in advance from just about all Macross toy collectors. Quote
sqidd Posted February 7, 2022 Posted February 7, 2022 33 minutes ago, no3Ljm said: SV-51's discounted preorder price, huh? Hmmm. If it is, I'll just wait for Arcadia to make the color scheme I like. They have to pay for new R&D and molds. Plus, inflation/rising cost of raw materials and the weakening power of the dollar. Quote
no3Ljm Posted February 7, 2022 Posted February 7, 2022 32 minutes ago, sqidd said: They have to pay for new R&D and molds. Plus, inflation/rising cost of raw materials and the weakening power of the dollar. I agree. That is truly understandable. If that's the price is going to be, I rather wait and get the color scheme I like since I suck on painting. Quote
Sanity is Optional Posted February 7, 2022 Posted February 7, 2022 I'm down for one regardless, mainly I hope it has proper detents for the relevant pivots and nothing's too fragile. Quote
Slave IV Posted February 8, 2022 Posted February 8, 2022 3 hours ago, sqidd said: They have to pay for new R&D and molds. Plus, inflation/rising cost of raw materials and the weakening power of the dollar. Agree with all this but also worth noting the US Dollar is currently around the strongest it has been in at least the last five years vs. the Japanese Yen. Quote
MILKAUTICO Posted February 8, 2022 Posted February 8, 2022 OK, Now that ARCADIA releases the VF-5000 I'm sure I just have to wait a few years for the VA-3!!! 😜 Quote
Knight26 Posted February 8, 2022 Posted February 8, 2022 Now if we can convince Arcadia and or Bandai to make some FZ-109s and VF/A-14s, plenty of variants theres. Quote
recon Posted February 8, 2022 Posted February 8, 2022 (edited) 9 hours ago, no3Ljm said: Yes, the location's the same. But as how the lineart goes, the fin folds first before the other half of the forearm. Basically like a sandwich. Legioss fin on the other hand swivels down. In which I believe Arcadia did on their prototype below. Seems like arcadia design it in such a way that the fins folds in and sandwich between in the forearms which is close to that of the linear artwork Edited February 8, 2022 by recon Quote
Shawn Posted February 8, 2022 Posted February 8, 2022 Found the Chronicle entries I honestly sort of looked over this valk when it came out...the colors were just a little odd for me to really like it, but I'm digging the design the more I look Quote
seti88 Posted February 8, 2022 Posted February 8, 2022 7 hours ago, no3Ljm said: Touch smaller than VF-1, then that's not going to cost us $400+/-. But I don't think it will ever go below Y30000. Probably like the VF-4A? Y32780 MSRP. Y27000 PO price (AmiAmi). What do you guys think? Depends if you are asking abt the PF or non -PF version! 😛 Quote
seti88 Posted February 8, 2022 Posted February 8, 2022 3 minutes ago, Shawn said: Found the Chronicle entries I honestly sort of looked over this valk when it came out...the colors were just a little odd for me to really like it, but I'm digging the design the more I look + like! VT-5000-G double seater looks cool! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.