ValkAddict Posted November 22, 2021 Posted November 22, 2021 I'm good with the delay ... allows me to save more $$$ for it. Quote
treatment Posted November 22, 2021 Posted November 22, 2021 Yeah. Delay is fine. Hopefully they re-open the PF po again... Quote
ValkAddict Posted February 17, 2022 Posted February 17, 2022 PSA: looks like the release has been pushed back to May 2022 Quote
Chronocidal Posted February 17, 2022 Posted February 17, 2022 Suppose delays are inevitable these days, but this one's pushing almost a year late at this point. Annoying part is, that's pushing the release awfully close to the Nora Sv-51.. going to make early summer expensive. Quote
treatment Posted February 17, 2022 Posted February 17, 2022 Yeah. PF is now May/22. non-PF is now April/22. Quote
Corrinald Posted February 18, 2022 Posted February 18, 2022 These YF-19 releases are really dragging on... Quote
davidwhangchoi Posted February 18, 2022 Posted February 18, 2022 Guys just take a gundam marker and trace your 19’s Quote
no3Ljm Posted February 18, 2022 Posted February 18, 2022 12 minutes ago, davidwhangchoi said: Guys just take a gundam marker and trace your 19’s I'm going to start doing that on my retirement, David. Quote
Sanity is Optional Posted February 18, 2022 Posted February 18, 2022 51 minutes ago, davidwhangchoi said: Guys just take a gundam marker and trace your 19’s I'm hoping the new one has better ankles. Quote
Chronocidal Posted February 18, 2022 Posted February 18, 2022 1 hour ago, davidwhangchoi said: Guys just take a gundam marker and trace your 19’s Honestly, I'm more likely to strip the panel lining than leave it. I just want all the markings printed on. Quote
badboy00z Posted February 18, 2022 Posted February 18, 2022 Man, I really wish Arcadia would re release the VF-19S in Fire Valkyrie and Emerald Force colors. Or Bandai DX versions. Quote
recon Posted February 18, 2022 Posted February 18, 2022 (edited) Seems to me that the PF YF-19 has panel lines done up which i rather wish that they leave it bare for me to do my own panel wash and slight weathering Edited February 18, 2022 by recon Quote
davidwhangchoi Posted February 18, 2022 Posted February 18, 2022 19 hours ago, no3Ljm said: I'm going to start doing that on my retirement, David. 19 hours ago, Sanity is Optional said: I'm hoping the new one has better ankles. 18 hours ago, Chronocidal said: Honestly, I'm more likely to strip the panel lining than leave it. I just want all the markings printed on. Quote
no3Ljm Posted February 18, 2022 Posted February 18, 2022 (edited) 1 hour ago, davidwhangchoi said: Quoting those posts above, David, made me form a sentence: "On my retirement, I'm hoping I still have better ankles so I'm more likely to strip and leave my markings on." I know it doesn't make sense. But it's just funny to me. Ok. Moving on. Edited February 18, 2022 by no3Ljm Quote
Lolicon Posted February 18, 2022 Posted February 18, 2022 21 hours ago, Corrinald said: These YF-19 releases are really dragging on... I'll say. And mine's already paid for so it's not like it's giving my wallet a breather. 21 hours ago, davidwhangchoi said: Guys just take a gundam marker and trace your 19’s Well, look who won the lottery! Not all of us can afford fancy things like Gundam markers! Quote
starkiller239 Posted February 20, 2022 Posted February 20, 2022 On 2/17/2022 at 10:07 AM, Chronocidal said: Suppose delays are inevitable these days, but this one's pushing almost a year late at this point. Annoying part is, that's pushing the release awfully close to the Nora Sv-51.. going to make early summer expensive. Do you really believe that Nora is coming out in June? Quote
no3Ljm Posted April 8, 2022 Posted April 8, 2022 And both versions are now 'undecided'. Google Translate: Regarding "1/60 Complete Transformation YF-19 with Fast Pack", it will be released from [April 2022] due to production reasons. The current status has been changed to [Undecided]. We will announce it again as soon as the release schedule is known. Thank you for your understanding. "1/60 Complete Transformation YF-19 with Fast Pack Premium Finish" has been changed from the release [May 2022] to the current status [Undecided] due to production reasons. We will announce it as soon as the release schedule is known. Thank you for your understanding. Quote
MKT Posted April 8, 2022 Posted April 8, 2022 I suppose the current & ongoing full lockdowns at major parts of China is really disrupting movement of everything.. Quote
Corrinald Posted April 8, 2022 Posted April 8, 2022 Super excited I paid up front for one of these. It will release someday I guess Quote
jenius Posted April 8, 2022 Posted April 8, 2022 Man, I ordered a refrigerator on Black Friday. They told me it would be available in March. I just called... now it's "possibly the end of September but that's still a preliminary number." There's a very good chance I will get my fridge more than a year after I bought it. Quote
sqidd Posted April 8, 2022 Posted April 8, 2022 1 hour ago, jenius said: Man, I ordered a refrigerator on Black Friday. They told me it would be available in March. I just called... now it's "possibly the end of September but that's still a preliminary number." There's a very good chance I will get my fridge more than a year after I bought it. Welcome to the new normal. And it's going to get worse. Not only are the supply chains shattered. Raw materials are becoming a problem. Next will be food shortages. Probably not the inability to get food. But the food choices will be dropping (they alreday are). And of course everything is getting a lot more expensive. As a retailer I can't even keep up with having to update my site with the new/higher prices they're shooting up so fast. My raw materials, component and shipping costs have been going through the roof. Assuming that they are available to buy at all. The two years of COVID are going to be considered "the good ol days" here pretty soon. Quote
ErikElvis Posted April 9, 2022 Posted April 9, 2022 Man I’ve really been looking forward to that PF for a while now….. jeez Quote
Bolt Posted April 9, 2022 Posted April 9, 2022 Bummer, yes. But they need to watch their bottom line. We don't want another demise (Yamato) . And neither do they. Quote
no3Ljm Posted April 9, 2022 Posted April 9, 2022 42 minutes ago, Bolt said: Bummer, yes. But they need to watch their bottom line. We don't want another demise (Yamato) . And neither do they. I hope not. I still want to see them finish VF-5000G and redo YF-21 down the line. Quote
sqidd Posted April 9, 2022 Posted April 9, 2022 I'm mostly concerned that they succeed and can continue to support their families. I'm not worried about not being able to get more toys out of them very much. I'm not suggesting anyone here feels differently. Quote
jenius Posted April 9, 2022 Posted April 9, 2022 I believe a primary difference from Yamato to Arcadia was a shift from viewing themselves as toy company to more of a part-time model. I would guess Arcadia has very few full-time employees at this point and it's more a labor of love for most involved. Quote
technoblue Posted April 9, 2022 Posted April 9, 2022 On the one hand, I was looking forward to the PF YF-19. On the other hand, I am not bothered at all by the indefinite delay, especially given the mitigating circumstances. If Arcadia is still able to do it, it will release when it's ready. If not, then I do hope that they are still able to pursue other projects down the road as things get sorted. Quote
no3Ljm Posted April 13, 2022 Posted April 13, 2022 (edited) This is interesting. Arcadia has already changed its item page title with 'Reservation Cancellation'. Quote http://arcadia.ac/products/detail/337 1/60 完全変形 YF-19 with ファストパック 予約キャンセル分 1/60 Complete transformation YF-19 with Fast pack Reservation cancellation Quote http://arcadia.ac/products/detail/340 1/60 完全変形 YF-19 with ファストパック Premium Finish 予約キャンセル分 1/60 Complete transformation YF-19 with Fast Pack Premium Finish Reservation cancellation Aside from the Twitter feed, here's the official statements from Arcadia's website: Quote 2022-04 『1/60 完全変形 YF-19 with ファストパック』発売延期について お客様 各位 平素より格別なるお引き立てを賜り誠に有難う御座います。 今月4月発売を予定しておりました『1/60 完全変形 YF-19 with ファストパック』に関しまして、 誠に恐縮ながら生産遅延が発生して御座います。 つきましては、発売を延期させて頂く事となりました。 詳細は下記をご参照下さいませ。 ----------------------------------------------------- ・商品名：1/60 完全変形 YF-19 with ファストパック ・発売予定：【2022年4月】→【未定】 ----------------------------------------------------- 改めて販売スケジュールが確定次第、弊社公式HP/SNS/カスタマーメールにてご報告をさせて頂きます。 ご予約頂きましたお客様には、ご迷惑をお掛けする形となり大変心苦しく思いますが、 発売までもう少々お時間を頂けますようお願い申し上げます。 今後とも何卒、弊社商品を宜しくお願い申し上げます。 2022-04 About postponement of "1/60 perfect transformation YF-19 with Fast Pack" release Dear Customer Thank you for your continued patronage. Regarding "1/60 Complete Transformation YF-19 with Fast Pack" scheduled to be released in April this month, We apologize for the inconvenience, but there is a production delay. Therefore, we have decided to postpone the release. Please refer to the following for details. -------------------------------------------------- -------------------------------------------------- --- ・ Product name: 1/60 Complete transformation YF-19 with Fast pack ・ Scheduled to be released: [April 2022] → [Undecided] -------------------------------------------------- -------------------------------------------------- --- As soon as the sales schedule is confirmed, we will report it on our official website / SNS / customer email. We apologize for the inconvenience caused to customers who have made reservations. We kindly ask for your time before it goes on sale. We look forward to your continued support of our products. Quote 2022-04 『1/60 完全変形 YF-19 with ファストパック Premium Finish』発売延期について お客様 各位 平素より格別なるお引き立てを賜り誠に有難う御座います。 来月3月発売を予定しておりました『1/60 完全変形 YF-19 with ファストパック Premium Finish』に関しまして、 誠に恐縮ながら生産遅延が発生して御座います。 つきましては、発売を延期させて頂く事となりました。 詳細は下記をご参照下さいませ。 ----------------------------------------------------- ・商品名：1/60 完全変形 YF-19 with ファストパック Premium Finish ・発売予定：【2022年5月】→【未定】 ----------------------------------------------------- 改めて販売スケジュールが確定次第、弊社公式HP/SNS/カスタマーメールにてご報告をさせて頂きます。 ご予約頂きましたお客様には、ご迷惑をお掛けする形となり大変心苦しく思いますが、 発売までもう少々お時間を頂けますようお願い申し上げます。 今後とも何卒、弊社商品を宜しくお願い申し上げます。 2022-04 About postponement of "1/60 Complete Transformation YF-19 with Fast Pack Premium Finish" Dear Customer Thank you for your continued patronage. Regarding "1/60 Complete Transformation YF-19 with Fast Pack Premium Finish" scheduled to be released in March next month, We apologize for the inconvenience, but there is a production delay. Therefore, we have decided to postpone the release. Please refer to the following for details. -------------------------------------------------- -------------------------------------------------- --- ・ Product name: 1/60 Complete transformation YF-19 with Fast Pack Premium Finish ・ Scheduled to be released: [May 2022] → [Undecided] -------------------------------------------------- -------------------------------------------------- --- As soon as the sales schedule is confirmed, we will report it on our official website / SNS / customer email. We apologize for the inconvenience caused to customers who have made reservations. We kindly ask for your time before it goes on sale. We look forward to your continued support of our products. Edited April 13, 2022 by no3Ljm Quote
Lolicon Posted April 14, 2022 Posted April 14, 2022 My only regret with this purchase is that I paid for it last year. I'd rather pay for it now with today's exchange rates. Quote
Robin-11 Posted April 19, 2022 Posted April 19, 2022 So, does this mean we still have some chances to see the release of the Premium finish YF-19??? Quote
Sanity is Optional Posted April 19, 2022 Posted April 19, 2022 24 minutes ago, Robin-11 said: So, does this mean we still have some chances to see the release of the Premium finish YF-19??? They never cancelled the release, just postponed it without a release date. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.