Jump to content

Stands comparable to yetistands


Jdmguy25

Recommended Posts

  • 2 weeks later...
On 10/24/2023 at 4:30 PM, blitz said:

Placed my second order of GokinPlus stands. Love them.

Does anyone know what this product is? Was it a Yeti stands product? It adapts the bandai stand for use with the acrylics arms like yeti.

image.png.7c17cd7dc482337ac30bc7606019e8a0.png

Does the bandai base have enough weight to keep from toppling over?

Link to comment
Share on other sites

1 hour ago, Sandman said:

Does the bandai base have enough weight to keep from toppling over?

DX bases are hollow plastic, they rely on the size/width of the base being underneath the center of mass to keep things from tipping.

I'd be very careful about mounting something too high up, or too much off-center with one.

Link to comment
Share on other sites

5 hours ago, Sanity is Optional said:

DX bases are hollow plastic, they rely on the size/width of the base being underneath the center of mass to keep things from tipping.

I'd be very careful about mounting something too high up, or too much off-center with one.

this 100% it is why the arm stands for the bases i printed stay relatively low and why i do not trust the battroid mode arm  for those display bases. they are more made for fighter and gerwalk tbh, and i wish they'd make some better design.

Link to comment
Share on other sites

  • 3 weeks later...

I'm calling my Yamato 1/48 VF-1 adapters for Archi Stands complete. Tinkered with them a bunch over the long weekend, after not working on them for a few months. They can be printed in something more durable like PETG, but PLA does just fine with the way that I designed the structural reinforcements. There are four available: Battroid, Gerwalk, Fighter, and Armored Fighter. There are two Fighter versions because of how low the legs, arms, and gunpod sit with the armor attached. Plus the Armored Fighter is a lot heavier. They attach to the Archi Arcadia-A adapter. There's a tab that sits inside the Arcadia-A and a sleeve that goes around the outside for added stability. Even under extreme banking scenario tests they've held up just fine.

They are cradles, in other words they do not clip onto the valk. They leverage gravity and valk weight distribution in each mode, which eliminates worries about paint scraping (helpful for customs). I would not recommend tilting the valk 90 degrees or holding it upside down with the adapter attached. Not sure why you'd want to do that, but I'm putting the disclaimer out there anyway.

I'll be putting them up on Cults3D or another site soon. Will likely sell them as a set for a small amount, mainly to recover the cost of all the material I went through while designing them.

image.png.414ec65c1bdf93968ef5309faf28b82b.png

image.png.7de9311a5f0555baa80d72d259cab575.png

image.png.d126354db5f22a3434320848f982b2a2.png

image.png.07ff7d1eca695383a4fdaba60e5b8ff4.png

 

 

Link to comment
Share on other sites

2 minutes ago, jenius said:

Wow your Roy is still so white! I think my chests have all begun to yellow. 

Wish I could say that I did something special to keep him that white. I've had him sitting on an open shelf for years, but I live in a really dry place at high elevation and keep the display room fairly dark. Some or all of that environmental stuff probably helped. I did have a wing on another 1/48 start to go yellow on me, but I think that happened a long time ago when I was living somewhere far more humid.

Link to comment
Share on other sites

2 hours ago, Anasazi37 said:

I'm calling my Yamato 1/48 VF-1 adapters for Archi Stands complete. Tinkered with them a bunch over the long weekend, after not working on them for a few months. They can be printed in something more durable like PETG, but PLA does just fine with the way that I designed the structural reinforcements. There are four available: Battroid, Gerwalk, Fighter, and Armored Fighter. There are two Fighter versions because of how low the legs, arms, and gunpod sit with the armor attached. Plus the Armored Fighter is a lot heavier. They attach to the Archi Arcadia-A adapter. There's a tab that sits inside the Arcadia-A and a sleeve that goes around the outside for added stability. Even under extreme banking scenario tests they've held up just fine.

They are cradles, in other words they do not clip onto the valk. They leverage gravity and valk weight distribution in each mode, which eliminates worries about paint scraping (helpful for customs). I would not recommend tilting the valk 90 degrees or holding it upside down with the adapter attached. Not sure why you'd want to do that, but I'm putting the disclaimer out there anyway.

I'll be putting them up on Cults3D or another site soon. Will likely sell them as a set for a small amount, mainly to recover the cost of all the material I went through while designing them.

image.png.414ec65c1bdf93968ef5309faf28b82b.png

image.png.7de9311a5f0555baa80d72d259cab575.png

image.png.d126354db5f22a3434320848f982b2a2.png

image.png.07ff7d1eca695383a4fdaba60e5b8ff4.png

 

 

Great job @Anasazi37 , your dedication is much appreciated!

Link to comment
Share on other sites

The Yamato 1/48 VF-1 adapters for Archi Stands are now on Cults3D. I'm selling them for $5 as a set of four (Fighter, Armored Fighter, Gerwalk, Battroid):

https://cults3d.com/en/3d-model/art/yamato-1-48-vf-1-valkyrie-adapters-for-archi-display-stands

image.jpeg.7277dd4a3ac5b33d779bfff7fc48800b.jpeg

Given the complexity of the designs, they may not be easy for beginners to print. You have to use supports in many places and there will be some post-print cleanup needed as a result. I pre-oriented the parts for printing to make them as strong as possible and to both limit the amount of cleanup needed and limit how visible the supported sections are.

Link to comment
Share on other sites

On 12/1/2023 at 2:23 PM, blitz said:

Decided to recreate these adapters for personal use, wondering if there is any interest in the STLs.

I made my own version of the DX adapter and the yeti bandai stand adapter.

image.png.e23a8b554d665814a7c6d9fc66a81b17.png

image.png.976ad0276b454559e0c943b8e68ebe21.png

image.png.d4fe5fae1223a2c4e255eb255dd0154e.png

image.png.834c0536ab9251740dc8d9a0b44d89df.png

Awesome! That looks great!

Link to comment
Share on other sites

On 12/2/2023 at 9:16 AM, Anasazi37 said:

The Yamato 1/48 VF-1 adapters for Archi Stands are now on Cults3D. I'm selling them for $5 as a set of four (Fighter, Armored Fighter, Gerwalk, Battroid):

https://cults3d.com/en/3d-model/art/yamato-1-48-vf-1-valkyrie-adapters-for-archi-display-stands

image.jpeg.7277dd4a3ac5b33d779bfff7fc48800b.jpeg

Given the complexity of the designs, they may not be easy for beginners to print. You have to use supports in many places and there will be some post-print cleanup needed as a result. I pre-oriented the parts for printing to make them as strong as possible and to both limit the amount of cleanup needed and limit how visible the supported sections are.

I will link this in my page for you.  Great work!

Link to comment
Share on other sites

On 12/2/2023 at 9:16 AM, Anasazi37 said:

The Yamato 1/48 VF-1 adapters for Archi Stands are now on Cults3D. I'm selling them for $5 as a set of four (Fighter, Armored Fighter, Gerwalk, Battroid):

https://cults3d.com/en/3d-model/art/yamato-1-48-vf-1-valkyrie-adapters-for-archi-display-stands

image.jpeg.7277dd4a3ac5b33d779bfff7fc48800b.jpeg

Given the complexity of the designs, they may not be easy for beginners to print. You have to use supports in many places and there will be some post-print cleanup needed as a result. I pre-oriented the parts for printing to make them as strong as possible and to both limit the amount of cleanup needed and limit how visible the supported sections are.

I added this onto my site.  Hopefully people can buy your awesome work!

https://gokinplus.com/products/custom-3d-file-for-arcadia-a-1-48-yamato-adapters

Link to comment
Share on other sites

  • 3 months later...
On 12/2/2023 at 9:16 AM, Anasazi37 said:

The Yamato 1/48 VF-1 adapters for Archi Stands are now on Cults3D. I'm selling them for $5 as a set of four (Fighter, Armored Fighter, Gerwalk, Battroid):

https://cults3d.com/en/3d-model/art/yamato-1-48-vf-1-valkyrie-adapters-for-archi-display-stands

image.jpeg.7277dd4a3ac5b33d779bfff7fc48800b.jpeg

Given the complexity of the designs, they may not be easy for beginners to print. You have to use supports in many places and there will be some post-print cleanup needed as a result. I pre-oriented the parts for printing to make them as strong as possible and to both limit the amount of cleanup needed and limit how visible the supported sections are.

I finally got these printed and they look great with the GokinPlus stands!  Thanks to @Anasazi37  -- highly recommended.

 

IMG_0399.jpg

IMG_0400.jpg

IMG_0402.jpg

IMG_0403.jpg

Link to comment
Share on other sites

On 3/10/2024 at 10:38 AM, Reni said:

I finally got these printed and they look great with the GokinPlus stands!  Thanks to @Anasazi37  -- highly recommended.

 

IMG_0399.jpg

IMG_0400.jpg

IMG_0402.jpg

IMG_0403.jpg

That turned out really nice. I love how the grey adapter blends in with the valk. Glad to hear that you like the design. I put a lot of work into them!

Link to comment
Share on other sites

  • 5 months later...
1 hour ago, sh9000 said:

BE20D5E9-8544-4BAE-A1F1-34267D632D19.jpeg.c7fcbd3c830e73e587a6ef9321cb2e1e.jpeg

A4688C91-1F7D-4554-8200-012342D01C2B.jpeg.bbaf6e9b441548b70f847116bc7af617.jpeg

86C3638F-03B6-43E6-94A0-7712A0C428C9.jpeg.94aafb45bcb43ed117600061e48b8d8f.jpeg

F689CC67-9BF0-4FF7-8FC7-F5EBE84EC25A.jpeg.3c4de00843a3893c416f6d9464f426b8.jpeg

Prototypes of UN Spacy Archi Stand.

I hope they're going to restock the Archi Pro stands. Ever since I got a functional new display case, I've been wanting to get more stands like those, but they're all sold out. I prefer those over these UN Spacy stands.

Link to comment
Share on other sites

22 minutes ago, MacrossJunkie said:

I hope they're going to restock the Archi Pro stands. Ever since I got a functional new display case, I've been wanting to get more stands like those, but they're all sold out. I prefer those over these UN Spacy stands.

How often do they get restocked? I wonder if they have a preordering system for new stock comes in.

Link to comment
Share on other sites

On 9/11/2024 at 9:24 PM, MacrossJunkie said:

I hope they're going to restock the Archi Pro stands. Ever since I got a functional new display case, I've been wanting to get more stands like those, but they're all sold out. I prefer those over these UN Spacy stands.

Restock is going to happen tonight at around 11pm PST.

I generally send out emails for restock alerts so please subscribe to emails.

Thanks!

Link to comment
Share on other sites

On 9/11/2024 at 9:48 PM, rsvictor1976 said:

How often do they get restocked? I wonder if they have a preordering system for new stock comes in.

I restock pretty regularly, but there is really no set timeline.

Sometimes US Customs lets me have my shipments early and sometimes it gets delayed.

I also don't offer preordering as I am a 1 man show lol I have a full time gig and I do this on the side.

Thanks!

Link to comment
Share on other sites

On 12/1/2023 at 2:23 PM, blitz said:

Decided to recreate these adapters for personal use, wondering if there is any interest in the STLs.

I made my own version of the DX adapter and the yeti bandai stand adapter.

image.png.e23a8b554d665814a7c6d9fc66a81b17.png

image.png.976ad0276b454559e0c943b8e68ebe21.png

image.png.d4fe5fae1223a2c4e255eb255dd0154e.png

image.png.834c0536ab9251740dc8d9a0b44d89df.png

I am going to be introducing the Archi DX base adapter soon ^^

Link to comment
Share on other sites

GokinPlus restock alert!

It is all up now.  

I am still undecided on how I am going to be offering the UN Spacy stand yet.  It won't arrive until late this month.

As for DX Base adapter, this should go up this weekend.

 

Thanks!

Link to comment
Share on other sites

  • 2 weeks later...

For Limited Edition,

To not piss off some folks I have rephrased how I worded the announcement.

UN Spacy limited edition stand update
*In Stock tomorrow 9/27/24*
I have chosen to take care of my previous customers that have purchase history first. Please send an inquiry for purchases this time around. Due to super limited QTY, unfortunately, only those that have purchase history will be accommodated at this time. Even for those that are sending inquiry, it is not a guarantee as orders will be fulfilled in the order of when emails were received.
For those of you that have purchased from my site, please send an email to me at info@gokinplus.com
If you don't have purchase history, then please refrain from sending purchase inquiry.
I will try to get more later to provide chances for everyone but it is not a guarantee right now.
Thank you.
Link to comment
Share on other sites

3 hours ago, BroTaku79 said:

For Limited Edition,

To not piss off some folks I have rephrased how I worded the announcement.

UN Spacy limited edition stand update
*In Stock tomorrow 9/27/24*
I have chosen to take care of my previous customers that have purchase history first. Please send an inquiry for purchases this time around. Due to super limited QTY, unfortunately, only those that have purchase history will be accommodated at this time. Even for those that are sending inquiry, it is not a guarantee as orders will be fulfilled in the order of when emails were received.
For those of you that have purchased from my site, please send an email to me at info@gokinplus.com
If you don't have purchase history, then please refrain from sending purchase inquiry.
I will try to get more later to provide chances for everyone but it is not a guarantee right now.
Thank you.

Always mean to place an order, and will one day, but right now I can't help but feel regret having not done so already for this opportunity.

I do hope you produce more and that I'll be able to order a Limited UN Spacy one someday.

Link to comment
Share on other sites

2 hours ago, Radioguy said:

Always mean to place an order, and will one day, but right now I can't help but feel regret having not done so already for this opportunity.

I do hope you produce more and that I'll be able to order a Limited UN Spacy one someday.

I will do what I can to get more of these made and be able to just offer them to everyone on my site.

Thanks for taking interest!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...