68whiskey Posted August 1, 2022 Posted August 1, 2022 1 hour ago, Sanity is Optional said: Oof, that delivery fee, over ¥5000 showing to California. Easy ! Move out of California Quote
Sanity is Optional Posted August 1, 2022 Posted August 1, 2022 11 hours ago, 68whiskey said: Easy ! Move out of California Yeah, if I move to Texas is can cost even more! Quote
ValkAddict Posted August 2, 2022 Posted August 2, 2022 Does anyone know if and when Flightpose will get more stock in? Been checking their website and they are completely out of stock - been like that for about a year (I believe). Quote
no3Ljm Posted August 2, 2022 Posted August 2, 2022 2 hours ago, ValkAddict said: Does anyone know if and when Flightpose will get more stock in? Been checking their website and they are completely out of stock - been like that for about a year (I believe). Looks like it's only their Facebook that has the latest status update. Still on hiatus. Another option is Calibre Wings' Router Style Display Stand ver 2.0. It's mostly holds 1/72 aircraft models as per their descriptions. https://www.calibrewings.com/router-style-display-stand-version-2-0 @kelinda reviewed it from the previous page. Quote
derex3592 Posted August 2, 2022 Posted August 2, 2022 I purchased one of the Calibre Wings ones to replace the Flightpose that finally broke holding up my 1:72 Falcon model. All good so far...It did take quite a while to ship and arrive! Quote
68whiskey Posted August 3, 2022 Posted August 3, 2022 On 8/1/2022 at 2:25 PM, Sanity is Optional said: Yeah, if I move to Texas is can cost even more! Nah, I moved from CA to TX and it only cost more because of all the firearms I could buy. Otherwise it was significantly more cost effective. Quote
Sanity is Optional Posted August 3, 2022 Posted August 3, 2022 5 minutes ago, 68whiskey said: Nah, I moved from CA to TX and it only cost more because of all the firearms I could buy. Otherwise it was significantly more cost effective. Meanwhile in this reality I'm talking about international shipping costs, and California is closer to Japan than Texas is. Quote
68whiskey Posted August 3, 2022 Posted August 3, 2022 (edited) 3 minutes ago, Sanity is Optional said: Meanwhile in this reality I'm talking about international shipping costs, and California is closer to Japan than Texas is. my shipping costs on average have only gone up about $2-5 so its not as bad as you may believe it to be When I order the VF-31s I was paying anywhere from $30-35 and now im paying anywhere from $35-40 Edited August 3, 2022 by 68whiskey Quote
Lolicon Posted August 3, 2022 Posted August 3, 2022 With Yeti still gone, the next best stands are the Arcadia launch arm stands... so I ordered 9 more of them. Quote
Sanity is Optional Posted August 3, 2022 Posted August 3, 2022 1 hour ago, 68whiskey said: my shipping costs on average have only gone up about $2-5 so its not as bad as you may believe it to be When I order the VF-31s I was paying anywhere from $30-35 and now im paying anywhere from $35-40 I'm literally reading off the shipping cost from Amazon Japan, so it's 100% exactly what I believe it to be. ¥6,380 ¥5,487 delivery How much is shipping showing for you? https://www.amazon.co.jp/-/en/dp/B0B7VZW7M8 Quote
kaiotheforsaken Posted August 3, 2022 Posted August 3, 2022 25 minutes ago, Lolicon said: With Yeti still gone, the next best stands are the Arcadia launch arm stands... so I ordered 9 more of them. I've ordered 3, but I'm debating going as high as you have. They look nice and I have serious stand deficiency. Quote
Lolicon Posted August 3, 2022 Posted August 3, 2022 15 minutes ago, kaiotheforsaken said: I've ordered 3, but I'm debating going as high as you have. They look nice and I have serious stand deficiency. I had to order from 3 different sites because of they all limit to 3, but at least they all offer slow boat shipping. Amazon's shipping price is okay if you order 3 and it's DHL, but 6800 is above retail, so F that. Quote
Mog Posted August 3, 2022 Posted August 3, 2022 1 hour ago, Lolicon said: With Yeti still gone, the next best stands are the Arcadia launch arm stands... so I ordered 9 more of them. Between the launch arms and the FlightPose, I’d still take the FlightPose stands for the flexibility and posing options. However, I do miss the rock solid base and rubber nubs of the old version of the stand. The newer ones feel a little too light and hollow. Quote
Rhubarbarian Posted August 3, 2022 Posted August 3, 2022 (edited) 1 hour ago, kaiotheforsaken said: I've ordered 3, but I'm debating going as high as you have. They look nice and I have serious stand deficiency. I ordered two of the launch arms and I know I'm probably going to regret not ordering more. Who knew that good stands would be so hard to come by? The Great Valk Stand Shortage of 2022. Edited August 3, 2022 by Rhubarbarian Quote
kaiotheforsaken Posted August 3, 2022 Posted August 3, 2022 27 minutes ago, Rhubarbarian said: I ordered two of the launch arms and I know I'm probably going to regret not ordering more. Who knew that good stands would be so hard to come by? The Great Valk Stand Shortage of 2022. I remember back in the day when you might get a stand with a Yamato release. I think my 21 and original Nora 51 came with them. It's really a shame stands aren't more standard with these. One of their modes is a plane for goodness sake, having at least some of them soaring through your displays is kind of required. Quote
Slave IV Posted August 4, 2022 Posted August 4, 2022 The main thing that sucks about the launch arm is I don't want more than 2-3 Valks displayed in launch mode. Sure, you can display them however you want but they only look right to me holding a Valk in fighter mode. If they made the other clear arm with storage, I'd buy 10 of those. Quote
Lolicon Posted August 4, 2022 Posted August 4, 2022 I like the wider base on the Arcadia vs the older Yamato stands, as I had potential tipping issues when holding up a fully decked out 1/48 strike valk. I don't use the launch arm claw thingy at all because it's upside down from what was in the movie. I just like having as little of the stand showing as possible when the valk is "flying" Quote
Slave IV Posted August 4, 2022 Posted August 4, 2022 15 hours ago, Lolicon said: I like the wider base on the Arcadia vs the older Yamato stands, as I had potential tipping issues when holding up a fully decked out 1/48 strike valk. I don't use the launch arm claw thingy at all because it's upside down from what was in the movie. I just like having as little of the stand showing as possible when the valk is "flying" Yeah, I was trying to figure out a way to get the stand to hold the Valks the other way. Another reason why I just don't want too many of them. Clear arm options would have helped. Best I could play off: Quote
sh9000 Posted August 4, 2022 Posted August 4, 2022 On 8/2/2022 at 11:44 AM, derex3592 said: I purchased one of the Calibre Wings ones to replace the Flightpose that finally broke holding up my 1:72 Falcon model. All good so far...It did take quite a while to ship and arrive! I think I'm going to check out one of Calibre Wings' stands since it's clear. Quote
TheLoneWolf Posted August 4, 2022 Posted August 4, 2022 1 hour ago, Slave IV said: Yeah, I was trying to figure out a way to get the stand to hold the Valks the other way. Another reason why I just don't want too many of them. Clear arm options would have helped. Best I could play off: Someone used a coat hangar to correctly attach a 1/48 Super VF-1 Yamato to the arm claw way back. One end of the coat hangar was wrapped around the backpack and the other end was wrapped around the claw itself. It looked pretty good IIRC. Quote
Slave IV Posted August 4, 2022 Posted August 4, 2022 9 minutes ago, TheLoneWolf said: Someone used a coat hangar to correctly attach a 1/48 Super VF-1 Yamato to the arm claw way back. One end of the coat hangar was wrapped around the backpack and the other end was wrapped around the claw itself. It looked pretty good IIRC. Sounds like a way. Too bad they didn't make the claw a bit more adjustable so that you could get it to grab the Valks securely. Quote
Slave IV Posted August 4, 2022 Posted August 4, 2022 10 minutes ago, Chunky001 said: Fishing wire? Probably an even better method. But still not as elegant as an actually working arm that was designed better to begin with. Quote
eXis10z Posted August 5, 2022 Posted August 5, 2022 On 8/4/2022 at 5:33 AM, Lolicon said: With Yeti still gone, the next best stands are the Arcadia launch arm stands... so I ordered 9 more of them. These are solely for Arcadia birds right? Do they work on DX Chogokins? Quote
Lolicon Posted August 5, 2022 Posted August 5, 2022 23 minutes ago, eXis10z said: These are solely for Arcadia birds right? Do they work on DX Chogokins? Yeah. Someone will need to make a DX adapter if you want to use Bandai valks on the Arcadia stand... or just use the included stand. The Bandai DX stands are not that great but they're functional and... there. Quote
treatment Posted October 16, 2022 Posted October 16, 2022 I already got quite a few, but I'm being tempted to get moar... https://www.amazon.co.jp/-/en/dp/B0B7VZW7M8/ Quote
sh9000 Posted March 8, 2023 Posted March 8, 2023 https://www.facebook.com/groups/MacrossFanCentral/permalink/1875000269527391/?mibextid=5zvaxg Quote
Bolt Posted March 9, 2023 Posted March 9, 2023 3 hours ago, sh9000 said: https://www.facebook.com/groups/MacrossFanCentral/permalink/1875000269527391/?mibextid=5zvaxg Awesome. Thanks for sharing! Quote
TheLoneWolf Posted March 17, 2023 Posted March 17, 2023 I doubt it. Eugene Kim's announcement says "Designed & produced in S. Korea by Project Blue." Quote
Sandman Posted March 17, 2023 Posted March 17, 2023 I would like these but can never divert funds for them. Always an actual toy to buy all the time. Haven't been able to keep up new releases. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.