Stands comparable to yetistands

[Radioguy]

50 minutes ago, rsvictor1976 said:

@BroTaku79Any chance you can make an adapter for the ThreeZero ROBO-DOU toys that actually holds them in place instead of cradling them?

I'd love that.

[BroTaku79]

5 hours ago, rsvictor1976 said:

@BroTaku79Any chance you can make an adapter for the ThreeZero ROBO-DOU toys that actually holds them in place instead of cradling them?

All I can do is to make recommendations to my designer/supplier.

I personally don't make them, and each item takes a long time for my designer to produce.

In addition, he needs to buy the product in order to test fit, etc so there is a lot of resources involved when it comes to creating an item.

Tbh, I get a lot of requests from a lot of ppl from different platforms including MW, and quite frankly, I would love to make them all but the reality is....that is not possible at all.

At this point, we can only focus on what we think would be "high in demand" items as our time is very limited.  

Both myself, and the designer/supplier, we have main jobs and we do this on our spare time purely out of our passion for toys and Macross.

ThreeZero & Arcadia SDF-1 adapters/stand, these two items, I do hope to get these made sometime in the future so please continue to support us.

 

Thanks!

 

[Lolicon]

Oh man I would love an SDF-1 adapter. The default stand is okay but would prefer an Archi stand.

[BroTaku79]

8 hours ago, Lolicon said:

Oh man I would love an SDF-1 adapter. The default stand is okay but would prefer an Archi stand.

Anasazi37 has something for the SDF-1 so you should hit him up.

 

[jetcollector]

Your stands look wonderful! Eagerly awaiting your next restock! 

[Anasazi37]

On 2/16/2025 at 1:13 AM, BroTaku79 said:

Anasazi37 has something for the SDF-1 so you should hit him up.

I was finally able to set aside some time this weekend to get the SDF-1 adapter for Archi Stands posted to Cults 3D. Sqidd shared his original Yeti Stand design with me and I modified it to work with Archi Stands. There are two versions of the adapter: one for the toy leaning forward, one for the toy standing straight up. The files are free to download. Eugene said he might be able to include a link in his store, too.

https://cults3d.com/en/3d-model/art/archi-pro-stand-adapters-for-the-yamato-and-arcadia-1-3000-sdf-1-toy

Edit: yes, the SDF-1 isn't fully transformed into Storm Attacker mode. I was being lazy. I usually display it in Cruiser mode, but quickly transformed it so I could take some pictures on the stand. I might reshoot the pictures later, with the full transformation, if enough people tease me about it. 🙂  

Edited March 16 by Anasazi37

[Radioguy]

Lovely. I need to see if I can do those poses.

[recon]

7 hours ago, Anasazi37 said:

I was finally able to set aside some time this weekend to get the SDF-1 adapter for Archi Stands posted to Cults 3D. Sqidd shared his original Yeti Stand design with me and I modified it to work with Archi Stands. There are two versions of the adapter: one for the toy leaning forward, one for the toy standing straight up. The files are free to download. Eugene said he might be able to include a link in his store, too.

https://cults3d.com/en/3d-model/art/archi-pro-stand-adapters-for-the-yamato-and-arcadia-1-3000-sdf-1-toy

Edit: yes, the SDF-1 isn't fully transformed into Storm Attacker mode. I was being lazy. I usually display it in Cruiser mode, but quickly transformed it so I could take some pictures on the stand. I might reshoot the pictures later, with the full transformation, if enough people tease me about it. 🙂  

Nice. Do share with us the total height of the SDF-1 in storm attacker mode, pivoted forward on archi stand. Tks

[Anasazi37]

12 minutes ago, recon said:

Nice. Do share with us the total height of the SDF-1 in storm attacker mode, pivoted forward on archi stand. Tks

I've already removed it from the display stand, dismantled and packed away the stand, transformed it back to Cruiser mode, and put it back on its shelf (sorry). Before doing all of that, I roughly measured the height when it is standing straight up: 46 cm. So, pivoted forward will be less than that. And you could also turn the display arm around and lower it further to reduce the height more while keeping the toy centered over the base.

[recon]

1 minute ago, Anasazi37 said:

I've already removed it from the display stand, dismantled and packed away the stand, transformed it back to Cruiser mode, and put it back on its shelf (sorry). Before doing all of that, I roughly measured the height when it is standing straight up: 46 cm. So, pivoted forward will be less than that. And you could also turn the display arm around and lower it further to reduce the height more while keeping the toy centered over the base.

Tks for the info shared

[BroTaku79]

Okay Guys,

Skull Squad is finally available now.

Past few months have been very challenging for me with personal stuff including main job so I just had real tough time finding time.

Due to MOQ and QTY issues, Kakizaki (Ben Dixon) is only available as part of the full set of 4.

Once again, thank you for your support!

https://gokinplus.com/collections/archi-limited-edition-macross

 

Devin, I have added your 3D link for SDF-1 onto the site!  Thanks!

[Radioguy]

Argh. The one I had hoped to also be able to buy alone!😆

On 1/11/2025 at 12:31 PM, Radioguy said:

I know I'd be interested in a set of these as bases, and maybe two of Kakizaki.

[BroTaku79]

31 minutes ago, Radioguy said:

Argh. The one I had hoped to also be able to buy alone!😆

I will try to make Kaki available as a separate but it will be uber limited in QTY.

Thanks!

[sh9000]

Excellent work on the SDF-1 adapter @Anasazi37.

Nice Skull Squad stands @BroTaku79.