Stands comparable to yetistands

[David Hingtgen]

Never tried it on acrylic, but I use Novus #2 on both ABS and Polycarbonate.   

[Boobytrap]

Since it is acrylic another option is to use a butane torch. I've done it many times. It is great for eliminating rough cut edges, bubbles, or small scratches. Crystal clear every time.

Just start at a low flame and work your way up being sure that it is just off the surface and not in direct contact. I use about a medium flame but I've done it enough that I know the sweet spot for me. The goal is to melt it just enough that gravity fills in all the blemishes but not so much that it turns to goo (this would be hard to do with the low temps these torches get to). It may sound scary for the first time but it is an easy process and the material is pretty forgiving (especially since these are thick) so you don't have to be perfect. 

If you're still feeling hesitant you can always try it out first on a cheap piece from Home Depot or wherever. Tap some divots make some scratches and you'll figure it out real quick.

[sh9000]

Restock notice.

[Sandman]

did these sell out already?

[BroTaku79]

UN Spacy limited stands are available now.

All other items are back in stock except for Archi Pro Series (ETA 11/25/2024).

Thanks!

gokinplus.com

[BroTaku79]

38 minutes ago, Sandman said:

did these sell out already?

I posted it live at around 9:20pm

[Radioguy]

Well, this was my first order, and while I had wanted Archi Pro stands for a long time, the UN Spacy eyecandy was too much to resist, and why I felt bad when they sold out before. I have never had Yeti stands, nor Archi Pro stands before, so the UN Spacy one will be my first experience.

For those who have both, are the UN Spacy ones as versatile, or will I be looking to upgrade to Archi Pro stands one day?

[Radioguy]

Damn. I see in the email only one DX B adapter went through (Really did click for two, and one Arcadia). No chance on adding one more to the same order?

[BroTaku79]

7 hours ago, Radioguy said:

Damn. I see in the email only one DX B adapter went through (Really did click for two, and one Arcadia). No chance on adding one more to the same order?

Send me a PM with your name and what you want me to add onto the order.

Once I update your order, you will receive an email to pay the difference.

 

Thanks!

[BroTaku79]

7 hours ago, Radioguy said:

Well, this was my first order, and while I had wanted Archi Pro stands for a long time, the UN Spacy eyecandy was too much to resist, and why I felt bad when they sold out before. I have never had Yeti stands, nor Archi Pro stands before, so the UN Spacy one will be my first experience.

For those who have both, are the UN Spacy ones as versatile, or will I be looking to upgrade to Archi Pro stands one day?

Pro series is the versatile one.

UN Spacy is rather for your display prowess ^^

[Lolicon]

Pro stands already sold out? Been refreshing periodically since last night and they all say sold out.

[Test_Pilot_2]

15 minutes ago, Lolicon said:

Pro stands already sold out? Been refreshing periodically since last night and they all say sold out.

Same, if there were any available, they evaporated in the blink of an eye.

[Radioguy]

4 hours ago, BroTaku79 said:

Pro series is the versatile one.

UN Spacy is rather for your display prowess ^^

Is there any comparison chart that shows what one stand can do and what another cannot do?

I might have to develop prowess. 😉

PM sent, btw.

Edited November 18 by Radioguy

[BroTaku79]

5 hours ago, Lolicon said:

Pro stands already sold out? Been refreshing periodically since last night and they all say sold out.

No no, pro series did not get restocked yet.

ETA is 11/25/2024

[BroTaku79]

5 hours ago, Test_Pilot_2 said:

Same, if there were any available, they evaporated in the blink of an eye.

Pro series did not get restocked.

It was only for UN Spacy limited stands yesterday.

Pro series ETA is currently at 11/25/2024.

Thanks!

[BroTaku79]

1 hour ago, Radioguy said:

Is there any comparison chart that shows what one stand can do and what another cannot do?

I might have to develop prowess. 😉

PM sent, btw.

UN Spacy can only accommodate 1 valk.

Pro series double does two and custom max, you can put up to 3 valk in one stand.

It really boils down to one's preference.  While some like putting 1 valk per stand, others do prefer that sortie look so pro series work much better.

Hope that helps.

[Radioguy]

10 minutes ago, BroTaku79 said:

UN Spacy can only accommodate 1 valk.

Pro series double does two and custom max, you can put up to 3 valk in one stand.

It really boils down to one's preference.  While some like putting 1 valk per stand, others do prefer that sortie look so pro series work much better.

Hope that helps.

Ok, I had expected that it couldn't hold as many due to the position of the arm connection to the base, but wondered if there were other differences.

I do have a 1/60 Arcadia Max & Milia PF that I would probably pose on a Pro stand. I hope to grab one of those before long.

[Sandman]

So why are the un spacy stands not being offered anymore?

[BroTaku79]

On 11/18/2024 at 2:52 PM, Sandman said:

So why are the un spacy stands not being offered anymore?

This was meant to be limited edition.

[BroTaku79]

For those that missed out on UN Spacy, another limited edition is in the works.

Skull Squadron will likely be the next man up.

[Radioguy]

54 minutes ago, BroTaku79 said:

For those that missed out on UN Spacy, another limited edition is in the works.

Skull Squadron will likely be the next man up.

In colors as well?

[BroTaku79]

5 hours ago, Radioguy said:

In colors as well?

looking into that option as well.

Nothing is set in stone right now, it is just an idea.

[Radioguy]

10 minutes ago, BroTaku79 said:

looking into that option as well.

Nothing is set in stone right now, it is just an idea.

Oh, I'd love a green for DX DYRL Kakizaki if you do.

[Test_Pilot_2]

1 hour ago, BroTaku79 said:

looking into that option as well.

Nothing is set in stone right now, it is just an idea.

Make the base so you can open the bottom and insert a circular image card...

Suddenly the base can be used for anything. The image cards can be manufactured for next to nothing. Charge a premium. Profit.

Just don't charge so much that people just etsy or make their own.

Done right, your market would expand exponentially.

If you do this and it's a smash hit please remember me st Christmas or on my birthday :P.

[BroTaku79]

8 hours ago, Test_Pilot_2 said:

Make the base so you can open the bottom and insert a circular image card...

Suddenly the base can be used for anything. The image cards can be manufactured for next to nothing. Charge a premium. Profit.

Just don't charge so much that people just etsy or make their own.

Done right, your market would expand exponentially.

If you do this and it's a smash hit please remember me st Christmas or on my birthday :P.

lol yeah I am only doing this out of fandom and passion.

I also don't make the stands, it is the supplier out in Korea that makes them.

I will let him know about your idea though.

Thanks!

[David Hingtgen]

Considering how many Frontier DX valks are out there, I think an SMS-logo one could be nice (even though Bandai has already done their own version)

[BroTaku79]

1 hour ago, David Hingtgen said:

Considering how many Frontier DX valks are out there, I think an SMS-logo one could be nice (even though Bandai has already done their own version)

yeah, this will also be part of the limited edition in the future.

[Test_Pilot_2]

Is today Archi Pro day or did it come and go? I may have totally missed it.

[BroTaku79]

3 hours ago, Test_Pilot_2 said:

Is today Archi Pro day or did it come and go? I may have totally missed it.

Today is the ETA date.

I am going to pick up BIG shipments that arrived later today.

Restock emails get sent out to subscribers so be on the lookout.

 

Thanks.