RavenHawk Posted September 12, 2020 Share Posted September 12, 2020 Does anyone have any links for ordering the new book into the US? I probably have everything except for the Genesis Breaker material in at least 4 other books already, but... I feel like the completist in me will be kicking myself down the road if I skip it. Thanks. Quote Link to comment Share on other sites More sharing options...
Masked Aviator Posted September 12, 2020 Share Posted September 12, 2020 (edited) 22 hours ago, vladykins said: Sure. This one? Yes. This is the 1st issue. Be careful when you transform it into armour-mode. You better first put something like adhesive tape in the belly of the figure before putting the bike on the body. Otherwise the metal rod of the bike might leave a stress mark or even scratch the belly. This was my lesson. I heard Sentinel fixed this issue in their 2nd release by fine tuning something. Edited September 12, 2020 by Masked Aviator Quote Link to comment Share on other sites More sharing options...
vladykins Posted September 13, 2020 Share Posted September 13, 2020 That makes the mystery of where TFSource got these even weirder if it is first release. It's like their initial outlay got lost in the mail or something. Quote Link to comment Share on other sites More sharing options...
Masked Aviator Posted September 13, 2020 Share Posted September 13, 2020 5 hours ago, vladykins said: That makes the mystery of where TFSource got these even weirder if it is first release. It's like their initial outlay got lost in the mail or something. The 1st release should be sold out long ago. I wonder why TFSource is still in stock. It is a good deal anyway. Quote Link to comment Share on other sites More sharing options...
vladykins Posted September 13, 2020 Share Posted September 13, 2020 2 hours ago, Masked Aviator said: The 1st release should be sold out long ago. I wonder why TFSource is still in stock. It is a good deal anyway. They put up for preorder a couple months ago with a September date. I grabbed, wondering if it was really gonna happen, and here we are. Quote Link to comment Share on other sites More sharing options...
Podtastic Posted September 14, 2020 Share Posted September 14, 2020 On 9/2/2020 at 9:41 PM, peter said: Holy crap, that is HUGE. Bigger is better when it comes to the aliens. Quote Link to comment Share on other sites More sharing options...
akim Posted September 14, 2020 Share Posted September 14, 2020 On 9/12/2020 at 1:19 AM, Tober said: Roughly, it's 85% stuff we've seen many times before, 10% pics of toys and kits, 5% promotional and concept work for Genesis Breakers. There seems to be very little new lineart, but maybe you've seen it before... Yes, thanks... There are some official artworks unseen before... I've just skimmed through this book one time quickly... I'll talk about settings's part: Book's size is good, like this we can appreciate model sheets, settei in fair size.... But if there's one complaint to say, just one...: Documents's quality. Former Mospeada artbook, 11 years ago, was too small. Pictures are numerous but too reduced, tiny to estimate drawings's "finesse". Now, about this new artbook, dimensions are great but documents are unfit for an official release nor a amateur doujin release... It hurts to see " photocopy of photocopy of photocopy" of settei in big size... for the finesse we will pass.. We can mostly see too much upscaled drawings...more pixels than lines.. I know they didn't have original documents but several bunch of documents exist. Just ask for... Luckily, this artbook doesn't come down to this part: Artists's interview, modelers's part, plastic kits, Genesis Breaker.... It's a different book.. a must buy for those who don't own Shinkigensha's "Mospeada complete artworks Book", a real supplement for others.... Just my opinion... What's about yours? Quote Link to comment Share on other sites More sharing options...
F360 Posted September 15, 2020 Share Posted September 15, 2020 is anyone planing to get this 1/12 weapon for their 1/12 Riobot ride armor? LITTLE ARMORY (LA065) FIM92 STINGER TYPE https://www.hlj.com/1-12-scale-little-armory-la065-fim92-stinger-type-tmt31383 Quote Link to comment Share on other sites More sharing options...
Sildani Posted September 15, 2020 Share Posted September 15, 2020 BBTS finally got to me about the Legioss. Wonder what the heck took so long... Quote Link to comment Share on other sites More sharing options...
sqidd Posted September 15, 2020 Share Posted September 15, 2020 1 hour ago, Sildani said: BBTS finally got to me about the Legioss. Wonder what the heck took so long... I don't know. Maybe COVID and it's massive effects on the global supply and distribution chain? Quote Link to comment Share on other sites More sharing options...
sumyumgoy Posted September 16, 2020 Share Posted September 16, 2020 22 hours ago, F360 said: is anyone planing to get this 1/12 weapon for their 1/12 Riobot ride armor? *Snip* Thanks for sharing that! I think I will pick one up. Quote Link to comment Share on other sites More sharing options...
Sildani Posted September 16, 2020 Share Posted September 16, 2020 11 hours ago, sqidd said: I don't know. Maybe COVID and it's massive effects on the global supply and distribution chain? No, no, I mean others got their notifications from BBTS a week ago or so, I rather figured the entire load came in one shipment. But what do I know? Quote Link to comment Share on other sites More sharing options...
sqidd Posted September 16, 2020 Share Posted September 16, 2020 14 minutes ago, Sildani said: No, no, I mean others got their notifications from BBTS a week ago or so, I rather figured the entire load came in one shipment. But what do I know? Have you contacted them? Quote Link to comment Share on other sites More sharing options...
Atomski Posted September 16, 2020 Share Posted September 16, 2020 57 minutes ago, sqidd said: Have you contacted them? I have as I am still waiting to get my pre-order filled. They say they have not received their entire shipment and do not know when they are getting the rest. I suspect he got someones unpaid preorder. Any word from Sentinel about a 2nd run? I suspect, for the first time ever, I may get shorted by BBTS. Not sure I can somach the aftermarket prices already on this in Japan... Quote Link to comment Share on other sites More sharing options...
sqidd Posted September 16, 2020 Share Posted September 16, 2020 1 hour ago, Atomski said: I have as I am still waiting to get my pre-order filled. They say they have not received their entire shipment and do not know when they are getting the rest. I suspect he got someones unpaid preorder. Any word from Sentinel about a 2nd run? I suspect, for the first time ever, I may get shorted by BBTS. Not sure I can somach the aftermarket prices already on this in Japan... BBTS pulled a NY? What's odd is that BBTS re-listed them after PO's dropped didn't they? What's the street value in JP? Quote Link to comment Share on other sites More sharing options...
tekering Posted September 16, 2020 Share Posted September 16, 2020 34 minutes ago, sqidd said: What's the street value in JP? Sentinel's Legioss is still available under ¥30,000, so there's plenty of stock to go around. The Riobot Stig and Ray ride-armors, however, will cost you more. They've definitely appreciated in value. Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted September 16, 2020 Share Posted September 16, 2020 I should be receiving my Legioss by Monday Quote Link to comment Share on other sites More sharing options...
M'Kyuun Posted September 16, 2020 Share Posted September 16, 2020 Getting mine on Thursday, according to tracking. I've remained content with my crappy Toynami Stick Bernard Legioss all these years b/c, IMHO, it had the best aesthetics out of all the toys. With all the improvements and special touches Sentinel packed into their design, I'm excited to get this toy. A properly good Legioss has been long overdue. Thanks, Sentinel! Quote Link to comment Share on other sites More sharing options...
optimuspint Posted September 16, 2020 Share Posted September 16, 2020 (edited) So I ended up with two Legioss from BBTS. I opened one and it is a combination of floppy mess & over tight. Nothing that cant be fixed but more of an issue than I thought it would be. Still Better than anything we have gotten so far. Edited September 19, 2020 by optimuspint Spelling error Quote Link to comment Share on other sites More sharing options...
505thAirborne Posted September 17, 2020 Share Posted September 17, 2020 If you're looking for a CM's Dark Legioss Drone/Unmanned version. https://order.mandarake.co.jp/order/detailPage/item?itemCode=1147973722&ref=list&keyword=Mospeada&lang=en Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted September 18, 2020 Share Posted September 18, 2020 https://www.thingiverse.com/thing:4599619 Adapter for Sentinel Legioss and Toynami Tread (Beta) Quote Link to comment Share on other sites More sharing options...
Mog Posted September 18, 2020 Share Posted September 18, 2020 Interesting idea. The last pic shows that any potential Tread from Sentinel will probably shrink the gaps between the central yellow array and the boosters. But they're gonna have to use some slick engineering/witchcraft to integrate a full sized cockpit for the Tread that's at least comparable to what Toynami did. Quote Link to comment Share on other sites More sharing options...
sqidd Posted September 18, 2020 Share Posted September 18, 2020 28 minutes ago, Convectuoso said: https://www.thingiverse.com/thing:4599619 Adapter for Sentinel Legioss and Toynami Tread (Beta) I'm all over this. Thanks! Quote Link to comment Share on other sites More sharing options...
easnoddy Posted September 18, 2020 Share Posted September 18, 2020 Can someone print to order? I'll buy. Quote Link to comment Share on other sites More sharing options...
M'Kyuun Posted September 18, 2020 Share Posted September 18, 2020 Got my Legioss today from TFSource! Sure is Purdy. Mine has the uber-tight shoulders (I had to use some needle-nosed pliers to rotate them without stressing anything. I wrapped them in tape, but I still scratched the paint a little on both shoulders). The ankle ball joints on mine are fairly loose, especially the left. They're not quite floppy, but they're not strong enough to bear the weight in anything beyond moderately dynamic poses. Diver mode suffers a bit from it too. It's an extremely tight fit to get stick into the cockpit, and although I took my time and exercised care, he still came apart on me. It doesn't take much. It boggles the mind why they didn't implement a sturdier solution, especially in light of what NewAge and Magic Square are doing with their legends figs. All things being equal, I'm glad the focus was on the Legioss. This is the Legioss toy I've been waiting 30+ years for, ever since I bought the old Monogram "Leader One" Gobots branded model kit and marveled at the complexity, detail, and range of articulation- it left an indelible impression on me, as well as a lasting endearment to the Legioss design. Bear in mind, I didn't watch Robotech, I wouldn't know what Mospeada is for at least another decade or so (I only just watched it for the first time this year), Transformers and Gobots were the standard I knew for transforming robots, the best example of which was Jetfire. (I didn't know what a VF-1 was either, but the design was ubiquitous- lots of cheap KO VF-1 toys in the 80's). I'm digressing down memory lane, but suffice it to say, the few flaws of the toy pale in comparison to all the rightness of it, and I'm glad to have a quality version of it to replace my aging and egregiously flawed Toynami. My hat's off to Sentinel. Quote Link to comment Share on other sites More sharing options...
easnoddy Posted September 18, 2020 Share Posted September 18, 2020 I'm on the other side. I owned all 3 Gakken 1/35 figures in the Robotech branded packaging. I've waited 35 years for an equivalent figure. The Sentinrl is the best so far. I want that boom. Quote Link to comment Share on other sites More sharing options...
Podtastic Posted September 18, 2020 Share Posted September 18, 2020 On 9/14/2020 at 3:15 PM, akim said: Yes, thanks... There are some official artworks unseen before... I've just skimmed through this book one time quickly... I'll talk about settings's part: Book's size is good, like this we can appreciate model sheets, settei in fair size.... But if there's one complaint to say, just one...: Documents's quality. Former Mospeada artbook, 11 years ago, was too small. Pictures are numerous but too reduced, tiny to estimate drawings's "finesse". Now, about this new artbook, dimensions are great but documents are unfit for an official release nor a amateur doujin release... It hurts to see " photocopy of photocopy of photocopy" of settei in big size... for the finesse we will pass.. We can mostly see too much upscaled drawings...more pixels than lines.. I know they didn't have original documents but several bunch of documents exist. Just ask for... Luckily, this artbook doesn't come down to this part: Artists's interview, modelers's part, plastic kits, Genesis Breaker.... It's a different book.. a must buy for those who don't own Shinkigensha's "Mospeada complete artworks Book", a real supplement for others.... Just my opinion... What's about yours? Does it have any decent pics of the Inbit, other than new Genesis Breaker concept artwork, that aren't already all over the net? Quote Link to comment Share on other sites More sharing options...
MacrossJunkie Posted September 18, 2020 Share Posted September 18, 2020 On 9/15/2020 at 7:28 AM, Sildani said: BBTS finally got to me about the Legioss. Wonder what the heck took so long... And what did they say? I'm in the same boat. I'm still waiting on mine and there's no notification or any indication that they ever arrived. Quote Link to comment Share on other sites More sharing options...
sqidd Posted September 18, 2020 Share Posted September 18, 2020 5 hours ago, easnoddy said: Can someone print to order? I'll buy. My buddy is printing me a blue and a white one so I can see what color I like best. I'm seeing him Monday evening. PM me Monday night. I can either send you the one I don;t use or get him to print you another. Quote Link to comment Share on other sites More sharing options...
vladykins Posted September 18, 2020 Share Posted September 18, 2020 4 hours ago, sqidd said: My buddy is printing me a blue and a white one so I can see what color I like best. I'm seeing him Monday evening. PM me Monday night. I can either send you the one I don;t use or get him to print you another. I'd love one as well. I will likely end up grabbing an Aoshima red tread since I'm more likely to leave my Zeta in fighter mode (and I'm guessing the reds will match more than the flat Toynami red). Quote Link to comment Share on other sites More sharing options...
sqidd Posted September 18, 2020 Share Posted September 18, 2020 43 minutes ago, vladykins said: I'd love one as well. I will likely end up grabbing an Aoshima red tread since I'm more likely to leave my Zeta in fighter mode (and I'm guessing the reds will match more than the flat Toynami red). White? Quote Link to comment Share on other sites More sharing options...
vladykins Posted September 18, 2020 Share Posted September 18, 2020 18 minutes ago, sqidd said: White? Would love white if possible. White is what Toynami/Aoshima went with, whereas CMs went with a crazy gunmetal gray color and Gakken's was a weird off-white that didn't match the rest of the white. The nice thing about white over blue is that if you try to match up different Sentinel's later you won't have a blue and green or a blue and red (or, hopefully, a black/dark gray for the shadow tread... but that's a pipe dream far in the future). Quote Link to comment Share on other sites More sharing options...
sqidd Posted September 18, 2020 Share Posted September 18, 2020 6 minutes ago, vladykins said: Would love white if possible. White is what Toynami/Aoshima went with, whereas CMs went with a crazy gunmetal gray color and Gakken's was a weird off-white that didn't match the rest of the white. The nice thing about white over blue is that if you try to match up different Sentinel's later you won't have a blue and green or a blue and red (or, hopefully, a black/dark gray for the shadow tread... but that's a pipe dream far in the future). I was thinking I would go white myself too. I figured the blue could work........... Quote Link to comment Share on other sites More sharing options...
vladykins Posted September 18, 2020 Share Posted September 18, 2020 I just found a Beagle Stick ride armor at Mandarake for 32,000. I *almost* bought it, but since I just bought the Sentinel version of Stick and I know the look I would get if this showed up right now right after my Sentinel Stick. Box has "some" damage which they call heavy damage, but toy looks excellent. Cloth doesn't even look disintegrated yet. https://order.mandarake.co.jp/order/detailPage/item?itemCode=1140330710&ref=list&keyword=mospeada&lang=en Please buy this before I change my mind. Quote Link to comment Share on other sites More sharing options...
Rhubarbarian Posted September 18, 2020 Share Posted September 18, 2020 I've been on the fence about buying a Beagle for a while and that's probably the best price I'm gonna see (certainly better than the $1k I saw at Frank & Sons before the pandemic started). Thanks for the heads' up vladykins! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.