Convectuoso Posted March 3, 2017 Share Posted March 3, 2017 A new member of my collection!! Quote Link to comment Share on other sites More sharing options...
Sandman Posted March 3, 2017 Share Posted March 3, 2017 On 2/22/2017 at 9:18 PM, SuperSenpai said: The Toynami Alphas had pegs to lock the shoulder and forearm joints together too. That didn't stop the things from having that unsightly gap between them. Yeah that's because Toynami sucks. They should have hired someone who could take a proper measurement. I spent a long time trying to figure out how to collapse the arms and still lock it into the leg tabs until i realized the problem wasn't with me but with whatever hack designed the toy. It's a shame it only needed less than an inch to be able to lock. Quote Link to comment Share on other sites More sharing options...
mechaninac Posted March 4, 2017 Share Posted March 4, 2017 (edited) There is an easy way to correct, or at least ameliorate, the hogging effect/upper arm to forearm gap on the Toynami Alpha: The peg on each forearm needs to be trimmed down by 1mm ( a little over 1/32") off the end opposite the wrist to compensate for the misalignment with the slots on the legs; or the slots can be lengthened* away from the feet thrusters by the same amount (either operation can be easily performed with a X-Acto knife); or a combination thereof. Doing this alleviates the mismatch that causes the arm sections to pull apart and/or the back to arch. It's not a perfect solution, but it's mostly unobtrusive and improves things a bit. * I actually prefer this option as it's both easier and will not weaken the pegs by making them smaller. Edit: made some corrections. Edited March 4, 2017 by mechaninac Quote Link to comment Share on other sites More sharing options...
seti88 Posted March 31, 2017 Share Posted March 31, 2017 Quote Link to comment Share on other sites More sharing options...
Tober Posted March 31, 2017 Share Posted March 31, 2017 That is rather scarey. I have almost zero faith in Toynami. Thanks tho. Quote Link to comment Share on other sites More sharing options...
jenius Posted March 31, 2017 Share Posted March 31, 2017 That's definitely the MegaHouse silhouette. You know we're heading toward another economic correction when multiple companies make Mospeada merchandise. Quote Link to comment Share on other sites More sharing options...
jenius Posted March 31, 2017 Share Posted March 31, 2017 1 minute ago, Tober said: That is rather scarey. I have almost zero faith in Toynami. Thanks tho. Not toynami. Quote Link to comment Share on other sites More sharing options...
Valkyrie Hunter D Posted March 31, 2017 Share Posted March 31, 2017 39 minutes ago, jenius said: That's definitely the MegaHouse silhouette. You know we're heading toward another economic correction when multiple companies make Mospeada merchandise. That's what I thought too when I saw the silhouette. I was hoping it'd be something new. Quote Link to comment Share on other sites More sharing options...
Duymon Posted March 31, 2017 Share Posted March 31, 2017 Blegh. Another re-hash of a nearly 10-yr old toy. Will wait for something new like that T-rex proto cyclone Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted March 31, 2017 Share Posted March 31, 2017 KitzConcept? And here I was thinking they might do another SD figure of the infamous Robotech series. Quote Link to comment Share on other sites More sharing options...
505thAirborne Posted March 31, 2017 Share Posted March 31, 2017 Thought there might be some fun updates to this thread....... Nope!! Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted April 1, 2017 Share Posted April 1, 2017 Even if it's a remake of an old toy, it should be cheaper to buy on release than what the Megahouse ones are being sold for. Interesting news. I need the blue and red Cyclones Quote Link to comment Share on other sites More sharing options...
505thAirborne Posted April 1, 2017 Share Posted April 1, 2017 I'm holding out for a whole new design, The CM's were ok but really small, Beagles attempt was great but uber pricey. The Megahouse design was an easy pass for me, in soldier mode it was ok, but the bike & figure by themselves were ugly IMO. Hopefully that 1/12 Ride-armor will become a reality! Quote Link to comment Share on other sites More sharing options...
Lorindor Posted April 3, 2017 Share Posted April 3, 2017 KitzConcept has promised so much and haven't delivered or even shown close to anything yet, so I choose to be sceptical. They have a 1:2000 SDF-1, a 1:55 Destroid monster and a whole 1:55 Robotech line to deliver on first... Quote Link to comment Share on other sites More sharing options...
Duymon Posted April 3, 2017 Share Posted April 3, 2017 maybe lost on boat Quote Link to comment Share on other sites More sharing options...
Slave IV Posted April 5, 2017 Share Posted April 5, 2017 Can't wait for the Sentinel Ride Armor! Just read this old article recently where the director at T-Tex said, “For me, personally, working on the original Beagle Mospeada was interesting. It was my first big project and I learned a lot. However, I look at it now and wish I could go back to re-design it based on the knowledge and experience I've acquired since. The other projects I also loved doing were the big SDF-1 Macross toy from Macross and the Starship Troopers power armor for Sentinel.” Source So, it looks like he got his wish and it means that this will likely be an incredible toy. But we all already expected that. Quote Link to comment Share on other sites More sharing options...
derex3592 Posted April 5, 2017 Share Posted April 5, 2017 I'm cautiously optimistic about the product...but verrrry afraid of the price and QC. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted April 5, 2017 Share Posted April 5, 2017 True. Same here. Toy prices now are so expensive. And it's not going down. And since this is going to be 1/12 scale, I'm wishing it will just stay around $150 or less. $200 maximum shipped. But if it's going to be like $280+, not sure if I'm going to keep it up if ever they will decide to release all variants. Quote Link to comment Share on other sites More sharing options...
Slave IV Posted April 5, 2017 Share Posted April 5, 2017 (edited) I'd love to see it under $200 but a Re:Edit non-transforming Iron Man figure in the same scale is close to $200 (much more if we are talking about Hulkbuster). Many Riobots have been $200+. Let's just say I'll be happy if it's under $300. I mean, I don't want to pay that much but if that's what it's gonna take, I'll make it happen. Edited April 5, 2017 by Slave IV Quote Link to comment Share on other sites More sharing options...
jenius Posted April 5, 2017 Share Posted April 5, 2017 I'm in... all variants, let's do this. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted April 5, 2017 Share Posted April 5, 2017 Well, if it's something under $300 or even at $300, I'm IN as long that it's one variant release every 6 months. Quote Link to comment Share on other sites More sharing options...
Slave IV Posted April 5, 2017 Share Posted April 5, 2017 Awaiting the preorders...but not in any hurry. I hope they take their sweet time on it so I can recover a bit of money. Quote Link to comment Share on other sites More sharing options...
danth Posted April 6, 2017 Share Posted April 6, 2017 On 4/5/2017 at 10:56 AM, Slave IV said: “...working on the original Beagle Mospeada was interesting...However, I look at it now and wish I could go back to re-design it based on the knowledge and experience I've acquired since.” My god. The Beagle was amazing and the creator is all "it's aight...I could do better now." Hell yeah! Let's see what you got! Quote Link to comment Share on other sites More sharing options...
Slave IV Posted April 6, 2017 Share Posted April 6, 2017 That's what I'm saying! I never got the Beagle and now I don't care. Bring on the Sentinel! Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted April 7, 2017 Share Posted April 7, 2017 (edited) 1 hour ago, Slave IV said: That's what I'm saying! I never got the Beagle and now I don't care. Bring on the Ride Armors! Edited for yah. Bring on the Sentinel sounds not-so-Mospeada. It's more Robotech-y. Edited April 7, 2017 by no3Ljm Quote Link to comment Share on other sites More sharing options...
jenius Posted April 7, 2017 Share Posted April 7, 2017 But it's a Sentinel ride armor! I need new pictures and release information. When is Summer Wonderfest? I need a countdown timer. Quote Link to comment Share on other sites More sharing options...
SuperHobo Posted April 9, 2017 Share Posted April 9, 2017 Looks like EVO toys legioss is going up for order tomorrow. Now let's all see the crazy price. A new tidbit I learned is that in soldier mode is about 24 cm tall or about 9.44 inches in height. I'm guessing that measurement is from head to toe. Pretty good sized legioss if you ask me. Quote Link to comment Share on other sites More sharing options...
Tober Posted April 9, 2017 Share Posted April 9, 2017 What happens if nobody pre-orders it? Would they drop the whole thing or go back to the drawing-board and try to get it right? Quote Link to comment Share on other sites More sharing options...
SuperHobo Posted April 9, 2017 Share Posted April 9, 2017 1 minute ago, Tober said: What happens if nobody pre-orders it? Would they drop the whole thing or go back to the drawing-board and try to get it right? Looking at their VF-2SS, they would keep all the preorders and release two other variants in the future. Quote Link to comment Share on other sites More sharing options...
Lorindor Posted April 9, 2017 Share Posted April 9, 2017 I've learned my lesson with Evolution Toys. I will wait for reviews from now on. Quote Link to comment Share on other sites More sharing options...
Tober Posted April 9, 2017 Share Posted April 9, 2017 20 minutes ago, Lorindor said: I've learned my lesson with Evolution Toys. I will wait for reviews from now on. 41 minutes ago, SuperHobo said: Looking at their VF-2SS, they would keep all the preorders and release two other variants in the future. 20 minutes ago, Lorindor said: I've learned my lesson with Evolution Toys. I will wait for reviews from now on. Yeah, I'll be waiting for the clearance sales as well. Quote Link to comment Share on other sites More sharing options...
derex3592 Posted April 9, 2017 Share Posted April 9, 2017 Not a chance in hell before reviews are up and someone here has an opinion on one in hand. Quote Link to comment Share on other sites More sharing options...
seti88 Posted April 9, 2017 Share Posted April 9, 2017 Quote Link to comment Share on other sites More sharing options...
505thAirborne Posted April 9, 2017 Share Posted April 9, 2017 I have both the CM's & Toynami Legioss, both are disappointing in one way or another IMO and have had parts break. So unless this new Legioss is a total dumpster fire, I'm willing to give it a shot, given the price isn't super ridiculous. Quote Link to comment Share on other sites More sharing options...
seti88 Posted April 10, 2017 Share Posted April 10, 2017 (edited) Pre-orders opened on the legioss! More pics in the link...https://hlj.com/product/EVT57263 Edited April 10, 2017 by seti88 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.