Lolicon Posted January 18, 2018 Posted January 18, 2018 51 minutes ago, no3Ljm said: Just so you know. It's too early to judge a 'Premium Finish' product announcement when the images you're looking is also the same images they used for promoting the 'non-Premium' release last 2015. For now, let's assume that Arcadia will probably just tampo what's being applied from the instruction manual. I know people including me will paying a lot for their releases but don't expect too much from them. They really don't listen to us so what's there to expect? Oh. Just so you know, I do have two 'regular' VF-0S. You didn't notice how 'sour' and 'bitter' I was when I posted that? Were you? I couldn't tell. Quote
Lolicon Posted January 18, 2018 Posted January 18, 2018 I'm thinking the promo pics shown are just reused pics from the regular edition. It's missing obvious markings like the big 301 on the lower stabilizers. Plus the markings are clearly stickers. You can see the sticker film. Quote
no3Ljm Posted January 18, 2018 Author Posted January 18, 2018 28 minutes ago, wmkjr said: Look at the staff blog on Arcadia's website. It shows you exactly where the Tampo is going. According to them it's 101 places. That's why no sticker sheet will be included in this set, it'll all be on already. https://ameblo.jp/arcadiaac/ Good thing they've updated their blog for once. Didn't notice that post before. So everything on the manual then just like the VF-1's. 11 minutes ago, Lolicon said: Were you? I couldn't tell. Nah. Just kidding. Besides, I'm already happy with the regulars I have. And still planning on finishing my own Premium version too. In time. Quote
Ridden001 Posted January 19, 2018 Posted January 19, 2018 9 hours ago, Kanedas Bike said: Perfect for those that may be on the fence or curious about what they are paying for. Thanks for posting! -b. Agreed, changes everything for me. Could be the best ever platform for a premium version. A lot of size. Quote
ZorClone Posted January 19, 2018 Posted January 19, 2018 Ultimately decided not to miss out on this one. I hope it blows me away when I get it. Quote
davidwhangchoi Posted January 19, 2018 Posted January 19, 2018 On 1/18/2018 at 12:57 PM, wmkjr said: Look at the staff blog on Arcadia's website. It shows you exactly where the Tampo is going. According to them it's 101 places. That's why no sticker sheet will be included in this set, it'll all be on already. https://ameblo.jp/arcadiaac/ thanks mate! also mentions only one production run there's no plans for a second production. everyone panic and buy multiples! Quote
eXis10z Posted January 20, 2018 Posted January 20, 2018 9 hours ago, ZorClone said: Ultimately decided not to miss out on this one. I hope it blows me away when I get it. If it doesn't at least it'll blow your wallet away. Quote
Mommar Posted January 20, 2018 Posted January 20, 2018 Having the 301 Tampoed on the wing would look way better than using the decals. Quote
Bahamutzyro Posted January 20, 2018 Posted January 20, 2018 ordered!! At least now I can use my regular finish version with the reactive armor. we just need some ghost boosters now! Quote
ArchieNov Posted January 22, 2018 Posted January 22, 2018 You know what I hate about these premium releases? It makes me look down on the regular releases I already own, because now I know it’s not the best version available. Quote
Pulltoeject Posted January 22, 2018 Posted January 22, 2018 I'm kinda new here, but I build models of jets and appying decals is not that difficult . There are tons of tutorials on how to apply them and seal them in with clear coats, etc, that have results as good as tampo printing. It all comes down to personal preference, but, saving lots of money making something you already have that much better looking is really satisfying. For completionists that may be a viable solution having the most amount of releases possible, but with what you have, you can always spruce it up to look more than awesome. Just my 2 cents. Quote
Sanity is Optional Posted January 22, 2018 Posted January 22, 2018 46 minutes ago, Pulltoeject said: I'm kinda new here, but I build models of jets and appying decals is not that difficult . There are tons of tutorials on how to apply them and seal them in with clear coats, etc, that have results as good as tampo printing. It all comes down to personal preference, but, saving lots of money making something you already have that much better looking is really satisfying. For completionists that may be a viable solution having the most amount of releases possible, but with what you have, you can always spruce it up to look more than awesome. Just my 2 cents. That works for decals, these are stickers, which you just can't get looking good due to the thickness. Quote
Slave IV Posted January 22, 2018 Posted January 22, 2018 1 hour ago, Pulltoeject said: I'm kinda new here, but I build models of jets and appying decals is not that difficult . There are tons of tutorials on how to apply them and seal them in with clear coats, etc, that have results as good as tampo printing. It all comes down to personal preference, but, saving lots of money making something you already have that much better looking is really satisfying. For completionists that may be a viable solution having the most amount of releases possible, but with what you have, you can always spruce it up to look more than awesome. Just my 2 cents. I absolutely agree that it's satisfying and you can get even better results customizing yourself. Thing is, the time it takes factored in with the additional cost of the PF versions, it makes more sense to just pay for the PF in my case because I don't have the time these days. Most the valks so far, I don't really care enough to pay extra for PF. With the 0S, I wanted another anyways so if that's all they have to offer, so be it. Plus this: 18 minutes ago, Sanity is Optional said: That works for decals, these are stickers, which you just can't get looking good due to the thickness. Quote
chyll2 Posted January 22, 2018 Posted January 22, 2018 Applying decals is a joy (provided that there is a quality water slides available) but lately, I dont even have the time to do it. I dont even have a makeshift work area to use. Quote
Pulltoeject Posted January 22, 2018 Posted January 22, 2018 You only need an airbrush/compressor kit for nail art for example wich cost about 40 dollars off ebay. Work area can be any room you choose, and the decals can be 1/72 of any modern jet for the no step markings or, printing them out can also be another ( VF-0 ones) option. But cutting those out are are more of a pain in tha *ss than cutting stickers. Even more, stickers always go yellow and acumulate dirt around the edges. Quote
Pulltoeject Posted January 22, 2018 Posted January 22, 2018 I don't want this to sound like a rant, just point out that it's not that time consuming, difficult or messy to customize this, or any other Valk. Quote
Slave IV Posted January 22, 2018 Posted January 22, 2018 To apply the entire sticker sheet and have it look anywhere near as good as the tampo job would take more than a few hours. I don't know about some people but a few hours is worth more than around $100 to me these days. But again, for the most part, I don't care about the stickers or additional tampos. Quote
chyll2 Posted January 22, 2018 Posted January 22, 2018 @Pulltoeject I am not saying you are wrong but you have to understand that not all people can have the time applying their own decal. Again, if you are satisfied with your own work, then this product is not for you. For the same reason, I am not buying the PF version but I do understand that for some, this is the only way to go. Quote
Sanity is Optional Posted January 22, 2018 Posted January 22, 2018 5 minutes ago, Slave IV said: To apply the entire sticker sheet and have it look anywhere near as good as the tampo job would take more than a few hours. I don't know about some people but a few hours is worth more than around $100 to me these days. But again, for the most part, I don't care about the stickers or additional tampos. Pretty much my take on it. To get decals to replace all the stickers, apply them, get them looking nice with microsol, and then topcoat the entire kit would be a couple days of work. Quote
Lolicon Posted January 22, 2018 Posted January 22, 2018 I'm with Slave IV on this. My time is in short enough supply that it's more "cost effective" to just buy the PF than scrounge up decals and do it myself these days. If you do have the time and inclination to decal her up yourself, then great! It's always satisfying to do something yourself. Quote
recon Posted January 22, 2018 Posted January 22, 2018 Hi guys, Could anyone help me with a little favor in providing comparision pics of both VF-0S and VF-31 in both fighter and battrod mode? As i maybe getting the VF-0S thus im worried about fitting it into my display shelf if its too long or tall. Dimensions provided would very much help too. Thanks Quote
wmkjr Posted January 22, 2018 Posted January 22, 2018 3 hours ago, recon said: Hi guys, Could anyone help me with a little favor in providing comparision pics of both VF-0S and VF-31 in both fighter and battrod mode? As i maybe getting the VF-0S thus im worried about fitting it into my display shelf if its too long or tall. Dimensions provided would very much help too. Thanks Battroid via anymoon.com: Quote
seti88 Posted January 22, 2018 Posted January 22, 2018 Sidenote loving the chunkiness of the 262 draken in that comparison pic! Quote
no3Ljm Posted January 22, 2018 Author Posted January 22, 2018 13 hours ago, ArchieNov said: You know what I hate about these premium releases? It makes me look down on the regular releases I already own, because now I know it’s not the best version available. So true. To think that I already spent too much money, effort and time to accumulate the Valks that I need beforehand to rebuy them again in PF format. 27 minutes ago, wmkjr said: Battroid via anymoon.com: Out of curiosity, does the measurement of the VF-31F up to the head laser or the beam rifle/cannon? Because number shows it's taller than VF-0A. I would assume that the VF-0A and the Draken is the same height without the VF-0 head laser and the Draken pointy ear(?). Quote
Zx31 Posted January 24, 2018 Posted January 24, 2018 https://twitter.com/ARCADIA_Co_Ltd/status/956044550958714880 Quote
wmkjr Posted January 24, 2018 Posted January 24, 2018 Don't go by those pics. They're recycled pics of the previous release with the addition of text mentioning tampo being applied and made to order online ordering. Quote
erizai Posted January 25, 2018 Posted January 25, 2018 I think the price is just too stiff for me. gotta pass. just off track a bit, iPhone X is pretty pricey, thus it doesn't sell well as well. .. hope Arcadia will price it wise next time. Quote
Lolicon Posted January 25, 2018 Posted January 25, 2018 There's always going to be fewer buyers for more expensive things. As a web exclusive item, I doubt Arcadia needs to sell anywhere near as many units as the iPhone for it to be profitable. In the case of the iPhone X, it looks like it sold pretty well, but not as much as Apple hoped. Quote
Shin Densetsu Kai 7.0 Posted January 27, 2018 Posted January 27, 2018 Hopefully a regular rerelease is on the way, I'll even take an unpainted kit version. Not sure why Arcadia hasn't brought those back. Quote
F360 Posted January 27, 2018 Posted January 27, 2018 23 minutes ago, Shin Densetsu Kai 7.0 said: Hopefully a regular rerelease is on the way, I'll even take an unpainted kit version. Not sure why Arcadia hasn't brought those back. They tested with the Armor kit for the zero, I don't think it sold all that well. Quote
no3Ljm Posted January 27, 2018 Author Posted January 27, 2018 56 minutes ago, F360 said: They tested with the Armor kit for the zero, I don't think it sold all that well. Probably because they release the wrong 'kit' to us. I'll buy a set of VF-1 and VF-0 kits. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.