Alex GS Posted December 29, 2018 Posted December 29, 2018 19 minutes ago, F360 said: Item Size/Weight : 38 x 25 x 14.7 cm / 1762g So with packaging and shipping box , it will go over 2000g for sure . That means no small packet. Shipping box and packaging for this size should be around 850g so the final weight will probably be close to 2600g Thanks for the info F360 I'm even more excited this valk! even thou it really got me by surprise that shipping cost, I was expecting something no more than 6000 Yen, but oh well really happy is now paid, finally will have again a 1/48 Valk!, I used to have a 1/48 VF 1J Max with supers but sold it lots of years ago and I do really missed my old yamato, but look at it now Bandai to the rescue!!!. Quote
gulan Posted December 29, 2018 Posted December 29, 2018 got both of my preorder shipped. amazon has the best price by far with $173. hlj with ems shipping come to $205. Quote
davidwhangchoi Posted December 29, 2018 Posted December 29, 2018 57 minutes ago, Lolicon said: Just my got Amiami request. They changed it to DHL because it was cheaper than EMS. 7510 for DHL, 7860 for EMS. me too 33 minutes ago, Kanedas Bike said: Same for AmiAmi, although I could of sworn that I requested DHL to begin with. Either way I'm glad to have received and paid the invoice. I can wait if there's a delay since my HLJ order should arrive on Monday. @davidwhangchoiI ordered (3) total. 1 from HLJ and 2 from AmiAmi -b. me too almost the same except i got one from amazon. 2 from amiami Quote
Hiriyu Posted December 29, 2018 Posted December 29, 2018 Just received payment email from AmiAmi for my two VF-1Js and made payment. Like others have noted, they automagically switched my order to DHL from EMS for a lower rate. I'm glad that they're being proactive in that sense. JPY7510 for shipment of two pieces - not too terribly bad. Quote
nightmareB4macross Posted December 29, 2018 Posted December 29, 2018 2 hours ago, borgified said: Whoa!! Slow down on your thoughts. Patience mon ami. This DX-VF1J just got released overseas and it will be sometime when someone will do it with the original Yammie V.2 /Arcadia GBP. You and everyone will get the results soon. Haha. Wait what? How on earth will you squeeze a 1/48 DX into a 1/60? I’m asking about the 1/48 Yamato. The request was obvious. Quote
tjdetweiler Posted December 29, 2018 Posted December 29, 2018 If anyone is keen, one of my friends got a PO still haven't paid and can redirect shipping to you. PM me if you are keen got until the 5th of January till the PO gets cancelled Thanks! Quote
Alex GS Posted December 29, 2018 Posted December 29, 2018 Gorgeous! Not sure if this post already been posted . From Supreme Mecha Facebook Quote
Chronocidal Posted December 29, 2018 Posted December 29, 2018 I actually kind of wish they wouldn't do the automatic switch to DHL... Unlike EMS, which just goes to the post office, or FedEx, or UPS, which both have offices here, I have to make absolutely certain that I'm home for DHL deliveries, or all they'll do is repeatedly leave requests to drop the package with no signature, which I'm not going to do. Quote
borgified Posted December 29, 2018 Posted December 29, 2018 26 minutes ago, nightmareB4macross said: Haha. Wait what? How on earth will you squeeze a 1/48 DX into a 1/60? I’m asking about the 1/48 Yamato. The request was obvious. Mass shifting/animation errors?? Now this is making me think to a get a GBP for my 1/48 Strike Hikaru or for the Low Vis 1a.. Quote
vlenhoff Posted December 29, 2018 Posted December 29, 2018 (edited) 4 hours ago, tekering said: You didn't get Yamato's 1:48 Kakizaki or Max? They released both movie and TV versions. Did Yamato officially release the 1/48 TV MAx, & Kakizaki? Or was it like a web special. I doubt many MW memebers have these two. I would have them, that's for sure. BTW Amiami requested payment. I told them to shut up and take my money. Edited December 29, 2018 by vlenhoff Quote
davidwhangchoi Posted December 29, 2018 Posted December 29, 2018 1 hour ago, Alex GS said: Gorgeous! Not sure if this post already been posted . From Supreme Mecha Facebook maybe i need to see some more dynamic poses, chest and drooping shoulders don't look right. it looks like a brick. Quote
jenius Posted December 29, 2018 Posted December 29, 2018 Hayao's a bit tougher to come by but you see TV Max available fairly often. Obviously they've held their value a lot better than most other 1/48 toys since they were Macross Chronicles mail-order toys but they weren't terribly hard to get. Quote
vlenhoff Posted December 29, 2018 Posted December 29, 2018 Just now, jenius said: Hayao's a bit tougher to come by but you see TV Max available fairly often. Obviously they've held their value a lot better than most other 1/48 toys since they were Macross Chronicles mail-order toys but they weren't terribly hard to get. Thanks Jenius, i knew there was a catch. I hope Bandai release these two. How hard can it be for a company to release the main TV mecha. Sometimes i hate exclusive/mail order editions, i swear. Quote
nightmareB4macross Posted December 29, 2018 Posted December 29, 2018 (edited) Well if Bandai decides to release it at all or as soon as Yamato, then you might want to take a look at the release schedule in the “Toys Section” as tho might provide ball park figure. Edited December 29, 2018 by nightmareB4macross ? Quote
rsvictor1976 Posted December 29, 2018 Posted December 29, 2018 Those missiles are too expensive. I usually don't like knock offs but for accessories like those, I hope a 3rd party comes out with one. Quote
vlenhoff Posted December 29, 2018 Posted December 29, 2018 (edited) Just now, nightmareB4macross said: Well if Bandai decides to release it at all or as soon as Yamato, then you might want to take a look at the release schedule in the “Toys Section” as tho might provide ball park figure. Even if i forgot to use our tools, which i did, lol. I think it is sort of a bad marketing move, when products are not easily available to all. Plus no 2 seaters either in the old Yammie 1/48 line. Instead of perfecting and finishing the 1/48 line, they jumped ship and went with the 1/60 V2. Not to beat on an old dead horse, but that was my greatest dissapointment back then. Let's hope Bandai finishes the 1/48 line properly. As they have almost done with the VF-1 HM-R series. BTW, is there a TV 1A Max, and TV 1A Kakizake in the HM-R line? Edited December 29, 2018 by vlenhoff Maybe it is just me, but for the casual collector, a TV 1S Roy, 1J Hikaru, 1A Max, and 1A Kakizake should be the holy grail of this series. Quote
seti88 Posted December 29, 2018 Posted December 29, 2018 https://twitter.com/vf_22s_/status/1078929052449132545 Oh my....i tot battroid would be the best mode for the 1/48 from the pics shown so far...but... Quote
rsvictor1976 Posted December 29, 2018 Posted December 29, 2018 So does everyone have a place to store their DX VF-1J box(es) yet? I don't think I have room left in my closet. Maybe I'll use it as a foot stool or monitor stand. Quote
eggy99 Posted December 29, 2018 Posted December 29, 2018 Personally i find all 3 modes of the VF-1 to be equally awesome. Gerwalk just has a perfect balance. Wings over the arms, no junk hanging off the back. The same cannot be said for any of the other transforming fighters. It’s why I just had to get 3 of this iconic fighter. I would not be satisfied if I were unable to display this beauty in all 3 glorious modes. Anyone else planning on panel lining? I’m also planning on lightly weathering mine. I’m kind of dreading the time it will take to do all 3. It’s going to take ages because I also dry brush the metal parts. Quote
seti88 Posted December 29, 2018 Posted December 29, 2018 (edited) Urghhh i want to get 3 as well but I have to stop at 2 due to my wallet hemorrhaging from all other purchases. Not to mention i have home repair bills to settle off Panel-lining wise, it would definitely be nice to do on this, however the usual excuses apply... if i could, i would only do one tho....i still like to have one at least..."stock" Edited December 29, 2018 by seti88 Quote
vlenhoff Posted December 29, 2018 Posted December 29, 2018 Just now, eggy99 said: Anyone else planning on panel lining? I’m also planning on lightly weathering mine. I’m kind of dreading the time it will take to do all 3. It’s going to take ages because I also dry brush the metal parts. Absolutely, I always panel line at least a Hikkie 1J, a 1S, and a CF. About getting multiples, my wallet had a serious talk with me, and it is not possible at this point. Quote
sh9000 Posted December 29, 2018 Posted December 29, 2018 1 hour ago, vlenhoff said: BTW, is there a TV 1A Max, and TV 1A Kakizake in the HM-R line? Not yet in the HMR line. For the 1/48 line, I might just stick to one of each release and only collect TV releases. 1 hour ago, seti88 said: https://twitter.com/vf_22s_/status/1078929052449132545 Oh my....i tot battroid would be the best mode for the 1/48 from the pics shown so far...but... That looks great. Quote
vlenhoff Posted December 29, 2018 Posted December 29, 2018 Just now, sh9000 said: Not yet in the HMR line. It still boggle my mind how the TV 1A Max and Kakizaki are mostly left behind. In my mind the TV series was immensely more popular than the movie. Maybe it is different in Japan? If it was up to me, TV Roy, Hikkie, MAx and kakizake would be the primal focus of the series. Quote
rdrunner Posted December 29, 2018 Posted December 29, 2018 4 hours ago, borgified said: Mass shifting/animation errors?? Now this is making me think to a get a GBP for my 1/48 Strike Hikaru or for the Low Vis 1a.. I love the GBP for the Yammie 1/48. Out of all the GBP releases so far, it was the most imposing looking IMO. Can’t wait to add a fifth GBP set to my collection... Quote
vlenhoff Posted December 29, 2018 Posted December 29, 2018 Just now, no3Ljm said: ^^^ this ^^^ LOL Quote
eggy99 Posted December 29, 2018 Posted December 29, 2018 HOLY COW. With the stock DX VF-1 already pretty beefy looking just imagine how thicc GBP will be! I almost regret not getting 4th for GBP release, but just can’t afford it. I’ll just pray Bandai release the GBP with VF-1J like they did with HMR. Quote
rdrunner Posted December 29, 2018 Posted December 29, 2018 31 minutes ago, no3Ljm said: Yes!! The VF-1J wallet gif that I’ve been waiting for!! Thanks @no3Ljm!!! This is another classic along with the focker VF-0S wallet gif.. Quote
tekering Posted December 29, 2018 Posted December 29, 2018 1 hour ago, rsvictor1976 said: So does everyone have a place to store their DX VF-1J box(es) yet? My attic is ready. Quote
spacemanoeuvres Posted December 29, 2018 Posted December 29, 2018 Looks like the Yamato pilot is significantly larger than the DX. Everyone knows you need 8 copies: 1 for each mode, 1 for each mode with super/strike parts, 1 for armor, and 1 to keep MISB if only I had the room. Quote
derex3592 Posted December 29, 2018 Posted December 29, 2018 Woke up to payment request from AmiAmi. With EMS shipping to TX and Paypal conversion fee, this bird set me back $204 and change. Well....what the wife doesn't know won't hurt me... Now it's the waiting game. Quote
Dobber Posted December 29, 2018 Posted December 29, 2018 Yeah got mine too. The sent the payment request like 15mins after I went to bed. Lol. We’ll probably have to wait till after the 3rd for them to ship Chris Quote
Lolicon Posted December 29, 2018 Posted December 29, 2018 I paid Amiami as soon as I got their email last night. No shipping notice. Looks like Amiami won't be shipping till next year. This is the first time they've failed me for the last time! Quote
seti88 Posted December 29, 2018 Posted December 29, 2018 2 hours ago, vlenhoff said: It still boggle my mind how the TV 1A Max and Kakizaki are mostly left behind. In my mind the TV series was immensely more popular than the movie. Maybe it is different in Japan? If it was up to me, TV Roy, Hikkie, MAx and kakizake would be the primal focus of the series. ^This! DYRL was the visually attractive babe but you know you want the one that makes you laugh. So hoping for vermillion squadron.. 1 hour ago, tekering said: My attic is ready. Oh, storage bliss....tho i might imagine you need to check for dampness, mites etc up there.... 2 hours ago, no3Ljm said: Oh double wallet destroyed GIF! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.