Gojira101 Posted December 20, 2017 Posted December 20, 2017 21 minutes ago, Sildani said: The 31 Siegfried has ratcheted hips. I’d love to see that on the YF-19. Ball socketed just seems like it would be problematic over time. Heck my VF-25F was sold because of its loose hips. Quote
Loop Posted December 20, 2017 Posted December 20, 2017 Dang man, we could have helped you get those hips tight again. I use either clear nail polish or future floor polish on the ball that connects the leg and hip together and it has worked out great for me over the years. there was also some other mod that involved rubber but I never tried that one, the idea was to add some friction to the joint via the thin piece of rubber that was added. Quote
Gojira101 Posted December 20, 2017 Posted December 20, 2017 54 minutes ago, Loop said: Dang man, we could have helped you get those hips tight again. I use either clear nail polish or future floor polish on the ball that connects the leg and hip together and it has worked out great for me over the years. there was also some other mod that involved rubber but I never tried that one, the idea was to add some friction to the joint via the thin piece of rubber that was added. Yeah I know that future floor polish but it was never enough. The crotch piece never locked solid either for me. At the end of the day I realized that my true passion lay with Macross II & Plus though. Quote
Ridden001 Posted December 23, 2017 Posted December 23, 2017 On 12/14/2017 at 10:22 AM, Chronocidal said: The Arcadia's shoulder pads also slide upwards though. I've never had any trouble with the range of motion on the existing shoulders, they were just fragile at first. Thanks man, I never discovered that articulation until you said that. I popped that shoulder pad off and right there was the sliding channel inside of it to move up and down. Quote
GGemini Posted July 19, 2018 Posted July 19, 2018 Apparently it's 1/48: https://www.youtube.com/watch?=1&v=O2sNpdWPius Quote
Sanity is Optional Posted July 19, 2018 Posted July 19, 2018 (edited) Here's the Tamashii page linked in the video, so this is 100% legit: https://tamashii.jp/special/macross/vf-1j/ Edit: It's interesting that they're not going to be the same 1/60 scale as the rest of the DX Chogokin Valkyries. Then again, 1/48 means not competing with Yamato/Arcadia (except the old Yamato 1/48s), and makes it more equal in size to the 1/60 Valkyries of the later series (Frontier/Delta). Probably easier to design in gimmicks and detail as well. Edited July 19, 2018 by Sanity is Optional Quote
seti88 Posted July 19, 2018 Posted July 19, 2018 (edited) Thanks to @GGemini for posting this! Edited July 19, 2018 by seti88 Quote
Slave IV Posted July 19, 2018 Posted July 19, 2018 Oh holy hell! Is the preorder coming up on the 27th. And does that text on the Yamasaki page mean it is or is not an exclusive? Quote
Sanity is Optional Posted July 19, 2018 Posted July 19, 2018 (edited) Upon closer inspection, this thing looks articulate as hell. What appears to be a waist pivot at the top/back of the nosecone. The forward joints under the hips also appear to have some sideways motion to them. Feet seem to have some ankle tilt left-right, rather than just forward/back. Edited July 19, 2018 by Sanity is Optional Quote
seti88 Posted July 19, 2018 Posted July 19, 2018 (edited) https://tamashii.jp/special/macross/vf-1j/ PREORDERS ON THE 27TH! Edit* Not sure if it is a regular release, after i translated it further... Edited July 19, 2018 by seti88 Quote
seti88 Posted July 19, 2018 Posted July 19, 2018 (edited) 11 minutes ago, Slave IV said: Oh holy hell! Is the preorder coming up on the 27th. And does that text on the Yamasaki page mean it is or is not an exclusive? https://tamashii.jp/special/macross/vf-1j/ PREORDERS ON THE 27TH! Edit* Not sure if it is a regular release, after i translated it further...it says ban on regular shops?! Edited July 19, 2018 by seti88 Quote
Sanity is Optional Posted July 19, 2018 Posted July 19, 2018 (edited) Posted in the other thread, but it'll probably get deleted because this exists: Upon closer inspection, this thing looks articulate as hell. What appears to be a waist pivot at the top/back of the nosecone. The forward joints under the hips also appear to have some sideways motion to them. Feet seem to have some ankle tilt left-right, rather than just forward/back. Edited July 19, 2018 by Sanity is Optional Quote
Shizuka the Cat Posted July 19, 2018 Posted July 19, 2018 (edited) 4 minutes ago, Sanity is Optional said: Upon closer inspection, this things look articulate as hell. What appears to be a waist pivot at the top/back of the nosecone. The forward joints under the hips also appear to have some sideways motion to them. Feet seem to have some ankle tilt left-right, rather than just forward/back. Also looks like it has a gun strap, and a seam line near the tip of the nose cone, similar to the HMR version. Edited July 19, 2018 by Shizuka the Cat Quote
Swoosh Posted July 19, 2018 Posted July 19, 2018 (edited) 11 minutes ago, seti88 said: https://tamashii.jp/special/macross/vf-1j/ PREORDERS ON THE 27TH! Edit* Not sure if it is a regular release, after i translated it further...it says ban on regular shops?! "一般店頭にて予約解禁" "Lift the pre-order ban on retail store" Edited July 19, 2018 by Swoosh Quote
Slave IV Posted July 19, 2018 Posted July 19, 2018 (edited) 4 minutes ago, Swoosh said: "一般店頭にて予約解禁" "Lift the pre-order ban on retail store" Yeah, that sounds like it will be available to retailers. It’s a “limited edition” that won’t be tamashi web exclusive. Edited July 19, 2018 by Slave IV Quote
seti88 Posted July 19, 2018 Posted July 19, 2018 If so, then its gonna be pre-order madness! I suppose this would come out around christmas right? Quote
GGemini Posted July 19, 2018 Posted July 19, 2018 According to the voiceover, the scale is 1/48 Quote
no3Ljm Posted July 19, 2018 Posted July 19, 2018 25 minutes ago, seti88 said: https://tamashii.jp/special/macross/vf-1j/ PREORDERS ON THE 27TH! Edit* Not sure if it is a regular release, after i translated it further... Looks like it's regular release. Another PO night madness. 一般店頭 > General Shop Front Quote
no3Ljm Posted July 19, 2018 Posted July 19, 2018 12 minutes ago, seti88 said: If so, then its gonna be pre-order madness! I suppose this would come out around christmas right? Should be. But if you purchase it from Nippon-Yasan, probably around March. I'm not sure with the scale though. But... we will see. Quote
no3Ljm Posted July 19, 2018 Posted July 19, 2018 Let's repost the video here, shall we. It has a waist swivel joint on the nosecone. I wonder if this going to use a swivel bar for the legs. And if so, how it will rotate at the same time with the nosecone. I wonder. Quote
enphily Posted July 19, 2018 Posted July 19, 2018 (edited) It can be system like on the VF-1 1/72 model from Bandai Edited July 19, 2018 by enphily Quote
seti88 Posted July 19, 2018 Posted July 19, 2018 (edited) 48 minutes ago, Sanity is Optional said: Posted in the other thread, but it'll probably get deleted because this exists: Upon closer inspection, this thing looks articulate as hell. What appears to be a waist pivot at the top/back of the nosecone. The forward joints under the hips also appear to have some sideways motion to them. Feet seem to have some ankle tilt left-right, rather than just forward/back. Yeah i wonder how that waist swivel is gonna hold up in fighter and gerwalk...hope it doesnt get loose over time and self rotate! tho battroid looks cool now the valk can do a body turn, wings at the back will still hinder it somehow.. Edited July 19, 2018 by seti88 Quote
no3Ljm Posted July 19, 2018 Posted July 19, 2018 2 minutes ago, seti88 said: antenna included in gerwalk mode? Ok. Now you made me convinced to get one. It will be the first perfect transforming VF-1J with the antennae on. Quote
no3Ljm Posted July 19, 2018 Posted July 19, 2018 (edited) 7 minutes ago, enphily said: It can be system like on the VF-1 1/72 model from Bandai So you're saying there's a possibility that it's not Perfect Transformation then? Edit: I didn't reload the page so it's missing the photo. Edited July 19, 2018 by no3Ljm Quote
seti88 Posted July 19, 2018 Posted July 19, 2018 Yea i tot it would be the same as the model kit. Tho that isnt encouraging, as i thk the model kit wasnt that well received, due to proportions and look of the stance, if i recall... Quote
no3Ljm Posted July 19, 2018 Posted July 19, 2018 Though I don't mind if they're going to use the kit's wing shortening system. And how the arm rotates and folds from the HMR version. Quote
Lolicon Posted July 19, 2018 Posted July 19, 2018 If I recall the old 1/48 Yamato had a retractable antenna. Quote
chyll2 Posted July 19, 2018 Posted July 19, 2018 25 minutes ago, Lolicon said: If I recall the old 1/48 Yamato had a retractable antenna. This is correct, it is integrated on the toy as well. The one from this DX version looks better but I am not sure if it can be integrated to the toy. Quote
eXis10z Posted July 19, 2018 Posted July 19, 2018 Thought it's translated as no PO via ordinary shop front? Quote
seti88 Posted July 19, 2018 Posted July 19, 2018 Reservations are lifted at the general store from Friday, July 27! Would take that to mean regular release. Now what are the odds also it will come with clown hands? Cant wait for the tamashii special page to come out next week... *And yes the inevitable sticker shock! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.