vlenhoff Posted August 1, 2020 Share Posted August 1, 2020 9 minutes ago, Slave IV said: Yep! Can you guess what’s in the even bigger box it’s sitting on? Nice! Is that all your Macross or just what you have set aside there? This is basically what i am selling. I have 4 piles around the house. What i am selling, what i am keeping, and unsure. Quote Link to comment Share on other sites More sharing options...
Slave IV Posted August 1, 2020 Share Posted August 1, 2020 (edited) 4 minutes ago, vlenhoff said: This is basically what i am selling. I have 4 piles around the house. What i am selling, what i am keeping, and unsure. Selling? Well I’m interested in the Low Vis 1/48! Edit: actually interested in the stealth full pack 1/48 and Yamato fold booster. Edited August 1, 2020 by Slave IV Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted August 1, 2020 Share Posted August 1, 2020 Just now, Slave IV said: Selling? Well I’m interested in the Low Vis 1/48! Shoot, except for the low vis! So sorry! The armored stealth under it is for sale though! I wasn't planning on selling any of these, but the current covid situation, made me change my mind. i don't think i'd get mutch for the ver 1 1/60, but at least someone will display them properly. Quote Link to comment Share on other sites More sharing options...
Slave IV Posted August 1, 2020 Share Posted August 1, 2020 Haha, smart move not to sell that low vis. I’ll PM you about the other two. Thanks! Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted August 1, 2020 Share Posted August 1, 2020 (edited) 10 minutes ago, Slave IV said: Haha, smart move not to sell that low vis. I’ll PM you about the other two. Thanks! Yeah, that one i have transformed, and i carefully applied some stickers on it. I am still sad i could not buy Graham's back then. I would have two now [EDIT IN] : What is the Falcon sitting on? So sorry gents, i didn't mean to hijack the thread. Back to DX VF-1 news. Edited August 1, 2020 by vlenhoff Quote Link to comment Share on other sites More sharing options...
crackpot Posted August 1, 2020 Share Posted August 1, 2020 1 hour ago, Slave IV said: Yep! Can you guess what’s in the even bigger box it’s sitting on? 31 minutes ago, vlenhoff said: What is the Falcon sitting on? Toys action figures. What prize do I get? Quote Link to comment Share on other sites More sharing options...
Slave IV Posted August 1, 2020 Share Posted August 1, 2020 35 minutes ago, vlenhoff said: Yeah, that one i have transformed, and i carefully applied some stickers on it. I am still sad i could not buy Graham's back then. I would have two now [EDIT IN] : What is the Falcon sitting on? So sorry gents, i didn't mean to hijack the thread. Back to DX VF-1 news. 3 minutes ago, crackpot said: Toys action figures. What prize do I get? Kinda right @crackpot It's the Sail Barge. Sorry about the detour, I will get some OT pics to share here someday soon hopefully. Quote Link to comment Share on other sites More sharing options...
tekering Posted August 1, 2020 Share Posted August 1, 2020 1 hour ago, Slave IV said: Can you guess what’s in the even bigger box it’s sitting on? I don't have to guess. 35 minutes ago, vlenhoff said: Back to DX VF-1 news. Sorry, no DX VF-1 news today! Quote Link to comment Share on other sites More sharing options...
Slave IV Posted August 1, 2020 Share Posted August 1, 2020 5 minutes ago, tekering said: I don't have to guess. Sorry, no DX VF-1 news today! ding ding ding! Quote Link to comment Share on other sites More sharing options...
MacrossJunkie Posted August 1, 2020 Share Posted August 1, 2020 2 hours ago, tekering said: I don't have to guess. Sorry, no DX VF-1 news today! Lol, at first, I thought this was a shot taken from a toy store. Quote Link to comment Share on other sites More sharing options...
Anasazi37 Posted August 1, 2020 Share Posted August 1, 2020 5 hours ago, vlenhoff said: Yeah Maximum visibility indeed. My Macross kite sticker is actually just static, not glued. I do prefer it in the interior, as it is protected from the elements. Plus i do prefer how understated it is with the dark tint. I would def use one of your skull 001 stickers inside if it was inverted. Glued is ok, since i plan on keeping this car until it dies. Then i'll fit another boxer engine in there, and drive it some more. I don't think it would be too hard to remove the sticker if you needed to, but you definitely wouldn't be able to use it again. Sounds like there might be some interest in making these and maybe some other things. Wasn't my original plan, just trying to broaden my printing capabilities for some personal projects and thought putting a Skull Squadron logo on my car would be fun, but happy to help the MW community. Quote Link to comment Share on other sites More sharing options...
burnout6 Posted August 2, 2020 Share Posted August 2, 2020 (edited) I'm actually interested in a kite decal for the car. Edited August 2, 2020 by burnout6 Quote Link to comment Share on other sites More sharing options...
sumyumgoy Posted August 2, 2020 Share Posted August 2, 2020 Same, I would love some decals for the car. Quote Link to comment Share on other sites More sharing options...
Anasazi37 Posted August 2, 2020 Share Posted August 2, 2020 (edited) 3 hours ago, burnout6 said: I'm actually interested in a kite decal for the car. 48 minutes ago, sumyumgoy said: Same, I would love some decals for the car. Something like this? I could also bring back the SDF-1 silhouettes that a member made into window decals almost 20 years ago (can't recall who that was). Just found the same (or really similar) artwork online. Had the left one on my car for a long time. This vinyl cutter is just too much fun to play with--now that I know how to drive it. And there's apparently a rainbow of color options for the vinyl itself. (Realizing this is a bit OT...) Edited August 2, 2020 by Anasazi37 Quote Link to comment Share on other sites More sharing options...
ghostryder Posted August 2, 2020 Share Posted August 2, 2020 (edited) I'm still waiting for the Jolly Roger decal to dry and then dullcoat (thanks Anasazi37 !), but I don't recall seeing any pics of Hikaru's 1S with black heatshield/fastpack symbols. I know red is supposed to be official, but something about that black heatshield brings back those same feelings I had when I first laid eyes on the 1/55 strike valkyrie box art as a kid. Edited August 2, 2020 by ghostryder Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted August 2, 2020 Share Posted August 2, 2020 5 hours ago, MacrossJunkie said: Lol, at first, I thought this was a shot taken from a toy store. Whenever my wife comments on the amount of toys I own, I show her the article on @tekering and that I aspire to his greatness. Quote Link to comment Share on other sites More sharing options...
borgified Posted August 2, 2020 Share Posted August 2, 2020 @Anasazi37 - Are you sure that you're not going to get sued by HG for using the Kite Logo if their around and see it?? Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted August 2, 2020 Share Posted August 2, 2020 13 hours ago, crackpot said: Toys action figures. What prize do I get? See i knew that was deceiving, and I thought about mentioning the barge, but I wasn't sure. Jabba's barge is so cool! 10 hours ago, Anasazi37 said: I don't think it would be too hard to remove the sticker if you needed to, but you definitely wouldn't be able to use it again. Sounds like there might be some interest in making these and maybe some other things. Wasn't my original plan, just trying to broaden my printing capabilities for some personal projects and thought putting a Skull Squadron logo on my car would be fun, but happy to help the MW community. I really like the skull 001 logo, but if i can use it inside [inverted or mirrored?] Since it is basically an outline, it wont block visibility on the right side rear triangular window. I for one, i am interested @Anasazi37. I also have an unused static kite sticker from back then, but i am afraid to let it go. 13 hours ago, tekering said: I don't have to guess. Sorry, no DX VF-1 news today! That DYRL Kakizaki looks great, but i want to keep it MAcross TV, and save some money. I did have to get the DX DYRL 1S Hikaru.... It is a soft spot of mine. Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted August 2, 2020 Share Posted August 2, 2020 3 hours ago, borgified said: @Anasazi37 - Are you sure that you're not going to get sued by HG for using the Kite Logo if their around and see it?? It is such a small private production run. I hope not. Quote Link to comment Share on other sites More sharing options...
sumyumgoy Posted August 2, 2020 Share Posted August 2, 2020 8 hours ago, Anasazi37 said: Something like this? I could also bring back the SDF-1 silhouettes that a member made into window decals almost 20 years ago (can't recall who that was). Just found the same (or really similar) artwork online. Had the left one on my car for a long time. This vinyl cutter is just too much fun to play with--now that I know how to drive it. And there's apparently a rainbow of color options for the vinyl itself. (Realizing this is a bit OT...) Ohh yes I really like the sdf-1 silhouettes. I think personally for me I would like a red kite logo. Quote Link to comment Share on other sites More sharing options...
ErikElvis Posted August 2, 2020 Share Posted August 2, 2020 10 hours ago, Anasazi37 said: Something like this? I could also bring back the SDF-1 silhouettes that a member made into window decals almost 20 years ago (can't recall who that was). Just found the same (or really similar) artwork online. Had the left one on my car for a long time. This vinyl cutter is just too much fun to play with--now that I know how to drive it. And there's apparently a rainbow of color options for the vinyl itself. (Realizing this is a bit OT...) I’d get a 4-5” attacker in blue Quote Link to comment Share on other sites More sharing options...
Anasazi37 Posted August 2, 2020 Share Posted August 2, 2020 8 hours ago, borgified said: @Anasazi37 - Are you sure that you're not going to get sued by HG for using the Kite Logo if their around and see it?? 4 hours ago, vlenhoff said: It is such a small private production run. I hope not. My goal would be to help out a small number of fans, at the cost of materials and shipping. 10 hours ago, ghostryder said: I'm still waiting for the Jolly Roger decal to dry and then dullcoat (thanks Anasazi37 !), but I don't recall seeing any pics of Hikaru's 1S with black heatshield/fastpack symbols. I know red is supposed to be official, but something about that black heatshield brings back those same feelings I had when I first laid eyes on the 1/55 strike valkyrie box art as a kid. Is that your 1S with the skull already applied? 4 hours ago, vlenhoff said: I really like the skull 001 logo, but if i can use it inside [inverted or mirrored?] Since it is basically an outline, it wont block visibility on the right side rear triangular window. I for one, i am interested @Anasazi37. I also have an unused static kite sticker from back then, but i am afraid to let it go. Mirroring wouldn't be hard. Would it work better for you if it was an outline (hollow) instead of solid? 3 hours ago, sumyumgoy said: Ohh yes I really like the sdf-1 silhouettes. I think personally for me I would like a red kite logo. I think it would be fun to bring those back. I'm trying to track down some other silhouettes that might be interesting. There are so many iconic images to choose from.... 49 minutes ago, ErikElvis said: I’d get a 4-5” attacker in blue That's a good size. The skull on my car is 4". Just large enough to be noticeable outside without creating a visibility issue inside. I can't even see it in my rearview mirror. Quote Link to comment Share on other sites More sharing options...
RedComet Posted August 2, 2020 Share Posted August 2, 2020 @Anasazi37 You can put me down for a Jolly Roger or maybe 2, depending on the price... Quote Link to comment Share on other sites More sharing options...
vladykins Posted August 2, 2020 Share Posted August 2, 2020 One reason I do post pictures of all my stuff to FB is I have a record of what I have for insurance purposes "just in case". Quote Link to comment Share on other sites More sharing options...
tekering Posted August 2, 2020 Share Posted August 2, 2020 1 minute ago, vladykins said: I do post pictures of all my stuff to FB is I have a record of what I have for insurance purposes That's a good idea. I have thousands of images on my hard drive, but only a YouTube video online... 11 hours ago, DYRL VF-1S said: Whenever my wife comments on the amount of toys I own, I show her the article on @tekering and that I aspire to his greatness. I doubt your wife would appreciate my greatness any more than my wife does. Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted August 2, 2020 Share Posted August 2, 2020 20 minutes ago, tekering said: I doubt your wife would appreciate my greatness any more than my wife does. Well just know that I appreciate it man. I do. Quote Link to comment Share on other sites More sharing options...
ghostryder Posted August 2, 2020 Share Posted August 2, 2020 Quote Link to comment Share on other sites More sharing options...
vladykins Posted August 2, 2020 Share Posted August 2, 2020 27 minutes ago, tekering said: That's a good idea. I have thousands of images on my hard drive, but only a YouTube video online... Yeah- the advantage of it being online is I know it won't be lost if my harddrive goes (or I lose my phone data if I took picts with my phone). Not a thought I relish, but something I keep in mind (especially since I have a lot of old games that are just lots of paper and cardboard). Quote Link to comment Share on other sites More sharing options...
Paco Grande Posted August 2, 2020 Share Posted August 2, 2020 8 minutes ago, ghostryder said: That looks so much better than the red heat shield. I understand that red is correct but I think it looks terrible. It’s the only thing I don’t like about that figure. Still hoping to get a DYRL Roy one day. Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted August 2, 2020 Share Posted August 2, 2020 (edited) 1 hour ago, Anasazi37 said: Mirroring wouldn't be hard. Would it work better for you if it was an outline (hollow) instead of solid? No, that exact skull 001 you you applied on the window of your black car, just mirrored, so it can be applied from the inside. My current kite sticker is 4.45 inches in diameter. How wide is your sticker? If it is 4.45 inches wide in diameter, or less, it would be perfect. Edited August 2, 2020 by vlenhoff Quote Link to comment Share on other sites More sharing options...
Anasazi37 Posted August 2, 2020 Share Posted August 2, 2020 1 hour ago, vlenhoff said: No, that exact skull 001 you you applied on the window of your black car, just mirrored, so it can be applied from the inside. My current kite sticker is 4.45 inches in diameter. How wide is your sticker? If it is 4.45 inches wide in diameter, or less, it would be perfect. Its current size is 4" high by 3" wide. That can easily be changed, larger or smaller, but the proportions would have to be maintained. Quote Link to comment Share on other sites More sharing options...
Anasazi37 Posted August 2, 2020 Share Posted August 2, 2020 2 hours ago, ghostryder said: Looking good! Glad the decals worked out for you. Quote Link to comment Share on other sites More sharing options...
kkx Posted August 2, 2020 Share Posted August 2, 2020 14 hours ago, ghostryder said: I'm still waiting for the Jolly Roger decal to dry and then dullcoat (thanks Anasazi37 !), but I don't recall seeing any pics of Hikaru's 1S with black heatshield/fastpack symbols. I know red is supposed to be official, but something about that black heatshield brings back those same feelings I had when I first laid eyes on the 1/55 strike valkyrie box art as a kid. Was it easy to remove the canopy cover and paint it black? Quote Link to comment Share on other sites More sharing options...
treatment Posted August 2, 2020 Share Posted August 2, 2020 (edited) 14 hours ago, ghostryder said: I'm still waiting for the Jolly Roger decal to dry and then dullcoat (thanks Anasazi37 !), but I don't recall seeing any pics of Hikaru's 1S with black heatshield/fastpack symbols. I know red is supposed to be official, but something about that black heatshield brings back those same feelings I had when I first laid eyes on the 1/55 strike valkyrie box art as a kid: Nice pics. You might have missed it, but I posted my black-heatshield Hikaru-1S back on June-14 both here and in the scale-thread: http://www.macrossworld.com/mwf/topic/45206-bandai-dx-chogokin-148-vf-1/?do=findComment&comment=1528549 http://www.macrossworld.com/mwf/topic/35121-148fps-160fps-172-12k-13k1100-and-now-1144/?do=findComment&comment=1528550 Edited August 2, 2020 by treatment Quote Link to comment Share on other sites More sharing options...
ghostryder Posted August 2, 2020 Share Posted August 2, 2020 (edited) 40 minutes ago, treatment said: Nice pics. You might have missed it, but I posted my black-heatshield Hikaru-1S back on June-14 both here and in the scale-thread: http://www.macrossworld.com/mwf/topic/45206-bandai-dx-chogokin-148-vf-1/?do=findComment&comment=1528549 http://www.macrossworld.com/mwf/topic/35121-148fps-160fps-172-12k-13k1100-and-now-1144/?do=findComment&comment=1528550 Nice! The glossy look is even more chunky-esque. Is that heatshield from a Yamato? Edited August 2, 2020 by ghostryder Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.