mista2x Posted March 18, 2020 Share Posted March 18, 2020 On 3/13/2020 at 2:39 PM, borgified said: DX 1s for 28k yen (minor box damage, unopened). https://order.mandarake.co.jp/order/detailPage/item?itemCode=1125044023&ref=list&keyword=マクロス&lang=en Edit: Box condition changed Thanks for the link. It arrived today with the box in perfect condition and unopened. Quote Link to comment Share on other sites More sharing options...
borgified Posted March 18, 2020 Share Posted March 18, 2020 2 hours ago, mista2x said: Thanks for the link. It arrived today with the box in perfect condition and unopened. Now waiting for the second release of the DX Missile set and the DX SSP @mista2x? The release date most likely be pushed back due to the present situation. Quote Link to comment Share on other sites More sharing options...
mista2x Posted March 18, 2020 Share Posted March 18, 2020 (edited) 2 hours ago, borgified said: Now waiting for the second release of the DX Missile set and the DX SSP @mista2x? The release date most likely be pushed back due to the present situation. Yes, as a matter of fact I was just looking around for them. Thanks for the info on the delay. I had the original Takatoku VF-1S Strike Valkyrie when I was a kid and noticed this one looked a little bare. Edited March 19, 2020 by mista2x Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted March 19, 2020 Share Posted March 19, 2020 Quick question. Not sure if this has been asked before. But is there a reason why the tampo on the VF-1S are thicker than the VF-1J? Does the VF-1A more in-line with VF-1J's tampo? Quote Link to comment Share on other sites More sharing options...
Sanity is Optional Posted March 19, 2020 Share Posted March 19, 2020 TV vs Movie versions nominally. Quote Link to comment Share on other sites More sharing options...
Muzaffar Posted March 19, 2020 Share Posted March 19, 2020 A bit too much I think. Quote Link to comment Share on other sites More sharing options...
jenius Posted March 19, 2020 Share Posted March 19, 2020 Your browser is acting up... prices all look fine for me. Quote Link to comment Share on other sites More sharing options...
Sanity is Optional Posted March 19, 2020 Share Posted March 19, 2020 For some reason you're showing the Yen price in USD. Works fine on my end as well. Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted March 19, 2020 Share Posted March 19, 2020 1 hour ago, Muzaffar said: A bit too much I think. So you’re saying when I paid $18,000 USD, I paid too much?! Dayuummm Quote Link to comment Share on other sites More sharing options...
sqidd Posted March 19, 2020 Share Posted March 19, 2020 1 hour ago, DYRL VF-1S said: So you’re saying when I paid $18,000 USD, I paid too much?! Dayuummm I have one I'll let go for $17,000.00 Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted March 19, 2020 Share Posted March 19, 2020 (edited) Some good news for the moment: DX SSP are still scheduled for April release while other releases are being delayed. https://tamashii.jp/importance/155/ Edited March 19, 2020 by DYRL VF-1S Quote Link to comment Share on other sites More sharing options...
valar Posted March 19, 2020 Share Posted March 19, 2020 Hi guys, can anyone tell me if the cockpit of Bandai DX VF-1 can be detached like in the Yamato/Arcadia 1/60 VF-1 (see attached pic)? I searched but found no information about it... Quote Link to comment Share on other sites More sharing options...
HardlyNever Posted March 19, 2020 Share Posted March 19, 2020 39 minutes ago, DYRL VF-1S said: Some good news for the moment: DX SSP are still scheduled for April release while other releases are being delayed. https://tamashii.jp/importance/155/ Looking at that it really reminds much of how much stuff Bandai as a company puts out. Glad the SSP aren't delayed (yet). Of course I have to deal with the NY delay, as well. 3 minutes ago, valar said: Hi guys, can anyone tell me if the cockpit of Bandai DX VF-1 can be detached like in the Yamato/Arcadia 1/60 VF-1 (see attached pic)? I searched but found no information about it... No, they cannot. You can disassemble it if you are so inclined, but that's just taking the toy apart. It's not an intended gimmick. Quote Link to comment Share on other sites More sharing options...
Guyffon Posted March 19, 2020 Share Posted March 19, 2020 Nope they can’t detach unless I didnt try hard enough Quote Link to comment Share on other sites More sharing options...
valar Posted March 19, 2020 Share Posted March 19, 2020 Thank you guys! Too bad, it could be an interesting feature Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted March 19, 2020 Share Posted March 19, 2020 2 hours ago, HardlyNever said: Looking at that it really reminds much of how much stuff Bandai as a company puts out. Glad the SSP aren't delayed (yet). Of course I have to deal with the NY delay, as well. Right?! And, yeah, I have the same dilemma. Hopefully, NY delivers ours "promptly" (in NY terms of course). But, considering there won't be any Valks to outfit with SSP (I already have two sets for my VF-1S's), I suppose it doesn't matter when I get them. Quote Link to comment Share on other sites More sharing options...
Slave IV Posted March 19, 2020 Share Posted March 19, 2020 FWIW, I made an order at NY from their Spring Sale and they shipped all my items within an hour. Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted March 19, 2020 Share Posted March 19, 2020 38 minutes ago, Slave IV said: FWIW, I made an order at NY from their Spring Sale and they shipped all my items within an hour. Perfect. I have no doubt they'll deliver and am in no huge rush for the SSP. Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted March 19, 2020 Share Posted March 19, 2020 (edited) I got impatient with them when they failed to place any orders on the first window, and grabbed two sets off Ebay to hold me over (at what I considered an acceptable markup). I'm not in any rush for my NY order, but I'll be interested to see how long it takes for them to receive them. I'm also curious whether they'll pull their same "larger orders get lowest priority" schtick again, and how that will screw with things when I'm sure a large number of people probably ordered as many as four sets. Edited March 19, 2020 by Chronocidal Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted March 19, 2020 Share Posted March 19, 2020 7 minutes ago, Chronocidal said: I got impatient with them when they failed to place any orders on the first window, and grabbed two sets off Ebay to hold me over (at what I considered an acceptable markup). I'm not in any rush for my NY order, but I'll be interested to see how long it takes for them to receive them. I'm also curious whether they'll pull their same "larger orders get lowest priority" schtick again, and how that will screw with things when I'm sure a large number of people probably ordered as many as four sets. *raises hand* Quote Link to comment Share on other sites More sharing options...
Slave IV Posted March 19, 2020 Share Posted March 19, 2020 I missed the initial opening at NY for SSP so I ended up ordering a few at FromJapan. Then NY opened up again so I waited a while before I broke down and ordered another from them too. Obviously, I'm in no rush to get any of them but I'll definitely get my From Japan order first since I don't think they even have a ferry option to ship. Quote Link to comment Share on other sites More sharing options...
pafy6285 Posted March 20, 2020 Share Posted March 20, 2020 6 hours ago, Slave IV said: Obviously, I'm in no rush to get any of them but I'll definitely get my From Japan order first since I don't think they even have a ferry option to ship. FromJapan can also ship by sea (at least to Canada). Usually use that option when shipping Gunpla in bulk (I usually bid on built or unbuilt gunpla lots from YAJ) Quote Link to comment Share on other sites More sharing options...
Slave IV Posted March 20, 2020 Share Posted March 20, 2020 1 hour ago, pafy6285 said: FromJapan can also ship by sea (at least to Canada). Usually use that option when shipping Gunpla in bulk (I usually bid on built or unbuilt gunpla lots from YAJ) Oh, good to know, thanks! In the end, I’ll use whatever is cheapest and that’s usually the boat. Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted March 20, 2020 Share Posted March 20, 2020 We're back up! In this world of uncertain times, I couldn't handle the site being down much longer! Quote Link to comment Share on other sites More sharing options...
derex3592 Posted March 20, 2020 Share Posted March 20, 2020 #truth Quote Link to comment Share on other sites More sharing options...
valar Posted March 21, 2020 Share Posted March 21, 2020 Hi guys, I'm waiting for my first VF-1S dx to arrive and meanwhile I'm studying the images and I saw two things that I don't like very much and I wonder why they made them that way... As you can see in the images that I have attached, the seat is too advanced compared to the cockpit. In the Yamato VF-1 1/48 probably due to the closed front landing gear it was necessary to move the seat forward but in the Bandai DX as in the yamato 1/60 version I think there were no real construction problems and it seems a stylistic choice. The other point in my opinion is a mistake. the prints on the fuselage are reversed. At the end, in my opinion The Bandai DX VF-1 could be DEFINITIVE VF-1! I really like the proportions, the transformation, the articulation, the visors and laser cannon of the heads, the hands with the moving fingers... and much more Quote Link to comment Share on other sites More sharing options...
valar Posted March 21, 2020 Share Posted March 21, 2020 Another point I don't like in the shape of the canopy... very different from the line art... Quote Link to comment Share on other sites More sharing options...
HardlyNever Posted March 21, 2020 Share Posted March 21, 2020 Regarding the cockpit, the short answer is that there are differences between the TV and DYRL cockpits. Most toys don't really make the distinction, though, and end up either picking one style or the other, or doing some kind of hybrid. The DX cockpit favors the DYRL canopy shape, but I wouldn't say it is exactly that. I think if we were going to get accurate TV/DYRL style different cockpits and canopies, it would have happened in the yamcadia v2 1/60 line, since they were separate pieces that could theoretically be made differently and put together easily. It didn't happen even then. I believe some kits do make the distinction. Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted March 21, 2020 Share Posted March 21, 2020 7 hours ago, valar said: Another point I don't like in the shape of the canopy... very different from the line art... I am in total agreement with on this. There are just way too many inconsistencies with the DX. What makes it worse is when a comparison using the hybrid stylized lineart of the Macross File books or Hasegawa mode sheets is used. Those just make everyone forget how they should actually be shaped. Here are some raw pictures of what the leading edge of the TV VF-1 canopies should be. Quote Link to comment Share on other sites More sharing options...
borgified Posted March 21, 2020 Share Posted March 21, 2020 Cracked open the DX 1s and the DX SSP set. Here's a shot that I've been planning to do with the 1/48 Yammie Steath 1J with the corresponding SSP set together. Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted March 24, 2020 Share Posted March 24, 2020 (edited) On 3/21/2020 at 4:16 PM, nightmareB4macross said: I am in total agreement with on this. There are just way too many inconsistencies with the DX. What makes it worse is when a comparison using the hybrid stylized lineart of the Macross File books or Hasegawa mode sheets is used. Those just make everyone forget how they should actually be shaped. Here are some raw pictures of what the leading edge of the TV VF-1 canopies should be. This is incredible, i would've never thought about this, unless i was illustrating the VF-1 (and i have illustrated it more than once). Your attention to detail is mindblowingly sick. Edited March 24, 2020 by vlenhoff Quote Link to comment Share on other sites More sharing options...
tturbozx66 Posted March 24, 2020 Share Posted March 24, 2020 (edited) tamashii exclusive. https://p-bandai.jp/item/item-1000143487/?fbclid=IwAR2dl_HKyU94idJxfvMm_8dSAG8v64-DbBUInDW39w2GsWoibM_C-WPXafk DX Chogokin Movie version VF-1A Valkyrie (Hayao Kakizaki) Selling price 19,800 yen (tax included) Points earned 198P Start accepting reservations March 25, 2020 16:00 End of reservation acceptance 23:00 on April 22, 2020 Delivery date Scheduled to be shipped in August 2020 Edited March 24, 2020 by tturbozx66 Quote Link to comment Share on other sites More sharing options...
chyll2 Posted March 24, 2020 Share Posted March 24, 2020 (edited) wow. They are giving decals, is that right? edit: bandai finally admit that they forgot to add the skull emblem near the canopy which will probably be consistent through out the line since they are giving away 4 set in the decal. haha they also insist that the 001 and 100 modex is intended as they added 011, 012 and 013 (with correspondong 110, 210, 310) Edited March 24, 2020 by chyll2 Quote Link to comment Share on other sites More sharing options...
Bolt Posted March 24, 2020 Share Posted March 24, 2020 Ah so.. nice pic. Quote Link to comment Share on other sites More sharing options...
F360 Posted March 24, 2020 Share Posted March 24, 2020 14 minutes ago, tturbozx66 said: tamashii exclusive. https://p-bandai.jp/item/item-1000143487/?fbclid=IwAR2dl_HKyU94idJxfvMm_8dSAG8v64-DbBUInDW39w2GsWoibM_C-WPXafk DX Chogokin Movie version VF-1A Valkyrie (Hayao Kakizaki) Selling price 19,800 yen (tax included) Points earned 198P Start accepting reservations March 25, 2020 16:00 End of reservation acceptance 23:00 on April 22, 2020 Delivery date Scheduled to be shipped in August 2020 I really like that pose. It almost looks like it’s saying “Yes! “ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.