Jump to content
This Topic

Bandai DX Chogokin 1/48 VF-1

IXTL

By IXTL
in Toys

 Share

Recommended Posts

peter SMS Squadron Leader

peter

Posted
Posted
  On 12/3/2020 at 7:01 AM, Drad said:

I knew that. I mean the little black badge shape with the skull on it, that sits slightly behind the canopy on the fuselage. Thought those were movie only.

Expand  

Yeah, that was definitely just a movie thing, something strangely missing from the Hikki 1S and the Kakizaki 1A.

 

Roi_Fokka ARMD Deck Swabber

Roi_Fokka

Posted
Posted

I just received a shipping notification for my first batch Roy from NinNin. Looks like the delay is over and they're shipping it through DHL now instead of FedEx.

Lolicon Galactic Diva

Lolicon

Posted
Posted

Opened my 1S and played with it a bit. It's fine. I'm glad I have one, but not super stoked or anything. Perhaps the incredible hassle that Bandai puts people through to buy their stuff has blunted my enthusiasm.

It has all the same good and bad points of every previous DX VF-1. My copy has the worst fitting airbrake of all my DX's. It does not sit flush and leaves an unsightly gap.

001 is printed correctly on both stabilizers. WTF happened to Bandai's idiotic excuses about symmetry?

Ah well. it's still cool toy and worth getting. Just try not to pay too much for it if you can.

Will it replace my Yamato TV 1S? Absolutely not. :p

Kyp Durron Alaska Base Survivor

Kyp Durron

Posted
Posted (edited)
  On 12/3/2020 at 12:26 AM, Kyp Durron said:

My TV Roy 1S got here a little while ago, no QC issues, the arms stay up better in fighter mode than my Hikaru 1S, and the wing flaps stay in place a bit more snugly as well. Very happy with it, and I'm glad that Nin-Nin came through for me and everyone else as well.

I was in the $225.29 group price wise, cost me $275.10 with shipping. If there's any future pre-order madness and the other places are sold out, I'll go with Nin-Nin again. :)

Expand  

OK, I feel the need to add to this post, so I will. To be clear, I am still NOT a fan of the following:

1. Those Goddamned leg fins...Why OH WHY could they not come up with a similar design choice like Yamato did?! You can't tell me they couldn't have done those in such a way that they can be locked into place, a very piss poor design choice and for me easily the most aggravating thing about this design. 

2. The arms still using friction fit pegs in fighter mode. These will only loosen up over time (Assuming you were fortunate enough to have them come tight in fighter mode in the first place) though not that big of a deal IF you're using Bandai's stand and displaying it in fighter mode the way they want you to. :rolleyes: Though listed as #2, this in my opinion is tied for #1 with the leg fin issue. 

3. The movable head laser gimmick, there's literally NO NEED for this and only creates more aggravation in getting them in the proper position in all modes. 

4. Movable wing flaps - I still don't see the need for this gimmick, but that's just me, it's actually the least annoying of the differences between Yamato/Arcadia and Banda's DX design. 

I remember some of you saying you were holding out hope for them addressing at least some of these issues, but it should be clear by now that Bandai has no intention of ever doing so. I, like the rest of you, will either have to live with these issues or just use Elmer's glue. (Which can be removed with warm water) 

My opinion hasn't changed now that I have two of these. The sculpt, weight, panel lines, and over the top tampo print detail make it worth owning, but I think that overall, Yamato did it better. The DX is an improvement in some areas, and a step backwards in others. If you have a bunch of Yamato/Arcadia's, then you can skip this or get just one just to have it for something new. 

I will be getting the VF-1D to go with my TV Roy 1S, I wasn't expecting a two seater, but since they are, I'll get one of those. After that, unless they come out with a stealth/low vis version, I'm done.

  On 12/3/2020 at 1:49 AM, rdrunner said:

Hey @Kyp Durron, we had both ordered from NNG on PO night, happy to see that you've got yours at long last.  Mine is still showing "preparation in progress" (since 11/30), sent another ticket yesterday but am trying VERY hard to resist the urge to ping them again...

Expand  

I'm sure that if they came though for me, they'll come through for you and the others, I think what happened is that they had limited stock on hand and sent those out and are sending them out as they get stock in. Hang in there! :)

*Edit* This is going to sound weird, but for some strange reason, this overall looks better than my DYRL Hikaru 1S. Logically I know this is impossible, the only explanation I can come up with is that the Yellow and Black just makes the whole thing look better to me than the Red and Black of the DYRL 1S. O.o

Edited by Kyp Durron
Alan Molina Destroid Armour Waxer

Alan Molina

Posted
Posted
  On 12/3/2020 at 1:30 AM, Norland said:

I think my Roy decided to take a trip around Japan because FedEx sure is taking the scenic route to get to me in California.

image.thumb.png.ad5d34d590a318dcb724e8ea6f4a9531.png

Expand  

same with me

 

it says it will be delivered today but last time i checked it was somewhere in  hong kong !!!

Alan Molina Destroid Armour Waxer

Alan Molina

Posted
Posted
  On 12/3/2020 at 4:35 AM, Anasazi37 said:

Did someone mention needing ejection seat triangle and cockpit skull decals? :D I'm open to doing another run of my DX valk supplemental set.

preview2.jpg

They've been coming through for many of us. My order from them arrived today. At least one of the members in your position contacted Nin-Nin and asked for a status update. They were told that there was a shipment delay for some of the stock and orders would be going out next week (I think).

Expand  

cani get some please?

rdrunner Bridge Bunny

rdrunner

Posted
Posted
  On 12/3/2020 at 9:56 AM, Kyp Durron said:

OK, I feel the need to add to this post, so I will. To be clear, I am still NOT a fan of the following:

1. Those Goddamned leg fins...Why OH WHY could they not come up with a similar design choice like Yamato did?! You can't tell me they couldn't have done those in such a way that they can be locked into place, a very piss poor design choice and for me easily the most aggravating thing about this design. 

2. The arms still using friction fit pegs in fighter mode. These will only loosen up over time (Assuming you were fortunate enough to have them come tight in fighter mode in the first place) though not that big of a deal IF you're using Bandai's stand and displaying it in fighter mode the way they want you to. :rolleyes: Though listed as #2, this in my opinion is tied for #1 with the leg fin issue. 

3. The movable head laser gimmick, there's literally NO NEED for this and only creates more aggravation in getting them in the proper position in all modes. 

4. Movable wing flaps - I still don't see the need for this gimmick, but that's just me, it's actually the least annoying of the differences between Yamato/Arcadia and Banda's DX design. 

I remember some of you saying you were holding out hope for them addressing at least some of these issues, but it should be clear by now that Bandai has no intention of ever doing so. I, like the rest of you, will either have to live with these issues or just use Elmer's glue. (Which can be removed with warm water) 

My opinion hasn't changed now that I have two of these. The sculpt, weight, panel lines, and over the top tampo print detail make it worth owning, but I think that overall, Yamato did it better. The DX is an improvement in some areas, and a step backwards in others. If you have a bunch of Yamato/Arcadia's, then you can skip this or get just one just to have it for something new. 

I will be getting the VF-1D to go with my TV Roy 1S, I wasn't expecting a two seater, but since they are, I'll get one of those. After that, unless they come out with a stealth/low vis version, I'm done.

I'm sure that if they came though for me, they'll come through for you and the others, I think what happened is that they had limited stock on hand and sent those out and are sending them out as they get stock in. Hang in there! :)

*Edit* This is going to sound weird, but for some strange reason, this overall looks better than my DYRL Hikaru 1S. Logically I know this is impossible, the only explanation I can come up with is that the Yellow and Black just makes the whole thing look better to me than the Red and Black of the DYRL 1S. O.o

Expand  

Hi there - and an update for those of us who ordered NNG especially the first batch, my first batch order has shipped via DHL earlier today, ETA Monday.  Given how fast DHL usually is, I would probably not be surprised if it got here on Saturday.  But we will see.

For those of us who are still waiting, good luck, but it looks like they ARE honoring all of our PO's so far.

Vertex ARMD Deck Swabber

Vertex

Posted
Posted
  On 12/3/2020 at 4:35 AM, Anasazi37 said:

Did someone mention needing ejection seat triangle and cockpit skull decals? :D I'm open to doing another run of my DX valk supplemental set.

preview2.jpg

 

Expand  

 

Have a set from the last run (think it was the last one) and they are great. Thanks for making them available again.

rdrunner Bridge Bunny

rdrunner

Posted
Posted
  On 12/3/2020 at 4:35 AM, Anasazi37 said:

Did someone mention needing ejection seat triangle and cockpit skull decals? :D I'm open to doing another run of my DX valk supplemental set.

preview2.jpg

They've been coming through for many of us. My order from them arrived today. At least one of the members in your position contacted Nin-Nin and asked for a status update. They were told that there was a shipment delay for some of the stock and orders would be going out next week (I think).

Expand  

Hi - if you still have some from the current batch, please can I order one?  Thanks!

Kanzaki ARMD Deck Swabber

Kanzaki

Posted
Posted (edited)

Shipped out from HLJ via DHL on Tuesday and arrived today. HLJ shipped my Roy in a shipper box slightly larger than the item itself with not much space for any fillers. Was almost sure that the slightest damage to the shipper box would inevitably damage the actual item itself.

TBH, I’m pleasantly surprised that Roy arrived at my doorstep without any visible damage to the shipper box. Kudos to DHL!

 

Edited by Kanzaki
crackpot Global's Pipe Holder

crackpot

Posted
Posted
  On 12/3/2020 at 3:31 PM, Kanzaki said:

Shipped out from HLJ via DHL on Tuesday and arrived today. HLJ shipped my Roy in a shipper box slightly larger than the item itself with not much space for any fillers. Was almost sure that the slightest damage to the shipper box would inevitably damage the actual item itself.

TBH, I’m pleasantly surprised that Roy arrived at my doorstep without any visible damage to the shipper box. Kudos to DHL!

 

Expand  

Would you prefer it in a bigger box with the extra padding but a higher shipping charge? The increase in price can be substantial and that's the trade off. I think the boxes they use are good enough to withstand dings unless something really heavy lands on it. 

Actar Skull Leader's Lackey

Actar

Posted
Posted

Thanks so much for all the replies, guys. I placed my order on the 30th of November and Okini still hasn't shipped out my VF-1S yet... Is it because I chose DHL?

Kanzaki ARMD Deck Swabber

Kanzaki

Posted
Posted
  On 12/3/2020 at 3:43 PM, crackpot said:

Would you prefer it in a bigger box with the extra padding but a higher shipping charge? The increase in price can be substantial and that's the trade off. I think the boxes they use are good enough to withstand dings unless something really heavy lands on it. 

Expand  

From where I come from, careful handling is almost non-existent in most local courier companies. More often than not a bigger box with extra fillers would save you the hassle (and agony) of a damaged item.

Don’t get me wrong though, HLJ has always packed my orders with care, and I’m all for cheaper shipping charge.  All I’m saying is DHL has handled my Roy with utmost care and I appreciate it :)

orbitalharvest Sharon Apple Concert Attendee

orbitalharvest

Posted
Posted
  On 12/3/2020 at 11:12 AM, Ash said:

Wow congrats man. Thats fast.....I ordered on 29th and I'm in asia, yet they just shipped it yesterday.....

Expand  

thanks, paid a bit more on okini than i would've liked.  on the flipside... still waiting on the my mid batch nin nin.  whereas the more expensive later batch one already shipped.  man... ethics right?

 

Angesdad Global's Pipe Holder

Angesdad

Posted
Posted
  On 12/3/2020 at 8:56 AM, Lolicon said:

Opened my 1S and played with it a bit. It's fine. I'm glad I have one, but not super stoked or anything. Perhaps the incredible hassle that Bandai puts people through to buy their stuff has blunted my enthusiasm.

Expand  

 Ditto. The level of anticipation and excitement for a new DX toy has diminished for me as well unfortunately. Got two incoming but feelin'...meh.

@Anasazi37, I would like one of two decals as well please shipped to Canuckland? 

Protoman Cannon Fodder

Protoman

Posted
Posted

As others have said it was a hassle to get but, looking at my shelf taking shape I can't help but think what a time to be alive. I missed the Arcadia and Yamato days. So to get something brand new and screen accurate is really, really cool. 

DYRL VF-1S New Edwards Test Pilot

DYRL VF-1S

Posted
Posted (edited)
  On 12/3/2020 at 7:01 AM, Drad said:

I knew that. I mean the little black badge shape with the skull on it, that sits slightly behind the canopy on the fuselage. Thought those were movie only.

Expand  

LOL... Ok phew! I was just trying to be nice but really was like...

 

huh.jpg

Edited by DYRL VF-1S
peter SMS Squadron Leader

peter

Posted
Posted
  On 12/3/2020 at 9:56 AM, Kyp Durron said:


*Edit* This is going to sound weird, but for some strange reason, this overall looks better than my DYRL Hikaru 1S. Logically I know this is impossible, the only explanation I can come up with is that the Yellow and Black just makes the whole thing look better to me than the Red and Black of the DYRL 1S. O.o

Expand  

No, not at all.  I was quietly thinking the same thing myself. 

Shawn mentioned a few pages ago about preferring Hikaru having a black heat shield instead of a bright red one, which was caused by a couple of animation anomalies in DYRL.  When someone replicated that with the DX for Shawn, I was thinking, hmmm.....that doesn't look too bad and I was trying to figure out why I found it aesthetically pleasing.  I guessed it was because maybe one less block of bright colors gave it a more real-world look?  I mean in current military aircraft, bright flashy colors aren't often seen anymore.  

Now we have the DX Roy, which already has the black heat shield, then add the tiniest of details - the head arrows in black instead of bright yellow.  

Ok, I know, these are transforming toys that have three modes, and are nowhere near a depiction of real-world aircraft, but toy makers over the years are adding more and more details to these things in an effort to make them more realistic.

My mind is drifting here...where was I going with this......anyway, I love the DYRL Hikaru, and at first, I didn't like it when it was revealed that the Roy head unit was more cartoony (smoother lines like in SDFM, black head arrows etc), but the more I think about it, the more I think it reduces the cartoony effect...in my opinion.  

Looking at all these factors, I find the Roy looks better (to me at lease) than the DYRL Hikaru.  That being said, I would still prefer a DYRL Roy pilot figure, and I doubt I will ever mount the ballon hands.

treatment Galactic Diva

treatment

Posted
Posted
  On 12/3/2020 at 9:56 AM, Kyp Durron said:

 

*Edit* This is going to sound weird, but for some strange reason, this overall looks better than my DYRL Hikaru 1S. Logically I know this is impossible, the only explanation I can come up with is that the Yellow and Black just makes the whole thing look better to me than the Red and Black of the DYRL 1S. O.o

Expand  

 

Maybe the correct "001" on the Roy-1S makes it looks tons better than the Hikaru-1S...

 

 

:bump:

sqidd BOMBA!

sqidd

Posted
Posted
  On 12/3/2020 at 7:41 PM, peter said:

 That being said, I would still prefer a DYRL Roy pilot figure, and I doubt I will ever mount the ballon hands.

Expand  

I can't wait to mount the balloon hands!!! Full TV look!

I do have the advantage of having three DYRL DX Fockers on display though. So, why not both?;)

The pseudo "TV" Yamato's in the pic will be DX's tonight.:good:

 

 

 

Focker Shelf.JPG

Alphahorizon Global's Pipe Holder

Alphahorizon

Posted
Posted
  On 12/3/2020 at 7:53 PM, sqidd said:

I can't wait to mount the balloon hands!!! Full TV look!

I do have the advantage of having three DYRL DX Fockers on display though. So, why not both?;)

The pseudo "TV" Yamato's in the pic will be DX's tonight.:good:

 

 

 

Focker Shelf.JPG

Expand  

Sweet Pict @sqidd! Those all DX version?

Chronocidal Super Dimension Member

Chronocidal

Posted
Posted
  On 12/3/2020 at 7:46 PM, treatment said:

 

Maybe the correct "001" on the Roy-1S makes it looks tons better than the Hikaru-1S...

:bump:

Expand  

Can agree with that entirely.  Since they finally printed the numbers right, this one is lacking what I'm just going to refer to as "Bandai Taint."  It's actually done correctly, without Bandai's stupid logic marring the whole thing. :p  While it's not really that visible, just knowing it's done correctly is a nice feeling that you don't have with the previous versions.

My AmiAmi order just got dropped at my door, and it's a beauty.  If the parts in the cockpits can be coaxed out, I might just mix and match pilots and control panels to just turn one of these into a DYRL and call it a day.

peter SMS Squadron Leader

peter

Posted
Posted
  On 12/3/2020 at 8:20 PM, Chronocidal said:

Can agree with that entirely.  Since they finally printed the numbers right, this one is lacking what I'm just going to refer to as "Bandai Taint."  It's actually done correctly, without Bandai's stupid logic marring the whole thing. :p  While it's not really that visible, just knowing it's done correctly is a nice feeling that you don't have with the previous versions.

My AmiAmi order just got dropped at my door, and it's a beauty.  If the parts in the cockpits can be coaxed out, I might just mix and match pilots and control panels to just turn one of these into a DYRL and call it a day.

Expand  

Are you planning to do anything with the pilot and cockpit?  I was thinking about robbing my Hasegawa 1/48 kit of a pilot....and even considered chopping the SDFM centre control stick....but not sure I should go that far in butchering the DX.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...