Bandai DX Chogokin 1/48 VF-1

[sqidd]

51 minutes ago, RedComet said:

By the looks of it, the plate appears to be attached via a single screw. It also appears to be that way in the LEK video (6:19 mark). Are people saying the plate itself differs between 1S and 1A?

 

I think that plate is the same but it is held on by a metal pin??? Driving pins out sometimes doesn't work out so hot.

 

[borgified]

Someone has gotten DX VF-1s Hikaru and the SSP from Amiami (prices unknown).

Managed to screencap it before it went to oblivion.

 

 

[F360]

37 minutes ago, borgified said:

Someone has gotten DX VF-1s Hikaru and the SSP from Amiami (prices unknown).

Managed to screencap it before it went to oblivion.

 

 

adding some more to your post count I see.  

[Anasazi37]

7 hours ago, RedComet said:

By the looks of it, the plate appears to be attached via a single screw. It also appears to be that way in the LEK video (6:19 mark). Are people saying the plate itself differs between 1S and 1A?

 

That particular plate, yes, but you have to remove at least four other screws and pry apart the forward (nosecone) section to slide it out. I was able to do it, but it induced some anxiety. I'd be very surprised if that plate is different between releases.

[mantisfists]

So, I finally got my hands on another FP last night (Hallelujah, I can get some sleep).  A while back I was lamenting about the differing shipping prices from different stores on this thread, so maybe somebody can help me understand this.  Here's my invoice for the first FP I bought.

Which was from the Nakano site.  Here's the invoice from the new FP

This is from the Fukuoka site. Regardless of shipping costs for this one, I'm paying it.  I'm just trying to understand it.  That's almost three times the amount as the fast packs sent to me last month. I'm not trying to beat a dead horse.  Again, just trying to understand.

*edit* By the way, holy $#!+ is Fukuoka fast.  It wasn't 10 minutes after I made payment to them that I got a notice that it'd shipped. Mandarake's DHL has always been super fast getting to me as well, so there's that, at least.

Edited October 9, 2020 by mantisfists

[F360]

8 minutes ago, mantisfists said:

So, I finally got my hands on another FP last night (Hallelujah, I can get some sleep).  A while back I was lamenting about the differing shipping prices from different stores on this thread, so maybe somebody can help me understand this.  Here's my invoice for the first FP I bought.

Which was from the Nakano site.  Here's the invoice from the new FP

This is from the Fukuoka site. Regardless of shipping costs for this one, I'm paying it.  I'm just trying to understand it.  That's almost three times the amount as the fast packs sent to me last month. I'm not trying to beat a dead horse.  Again, just trying to understand.

I would have to say the one with higher shipping is using a bigger shipping box.  bigger dimension = higher shipping cost for DHL. 

[nightmareB4macross]

A DX Custom Jetfire found on FB.

 

[borgified]

No heat shield or vest for that custom DX Jetfire?

Damn...  One good shot in the lower abdomen and its game over. Too bad that Hikaru is not a Headmaster as could still control the main transector body. 

[RedComet]

2 hours ago, mantisfists said:

This is from the Fukuoka site. Regardless of shipping costs for this one, I'm paying it.  I'm just trying to understand it.  That's almost three times the amount as the fast packs sent to me last month. I'm not trying to beat a dead horse.  Again, just trying to understand.

Yeah, I just got my first thing from Mandarake (not even a Valk) since May and it seems like their DHL rates have definitely gone up since then  it is what it is I guess...

[RedComet]

1 hour ago, nightmareB4macross said:

A DX Custom Jetfire found on FB.

 

 

Oh man, well that beats my project to do the same by a good 2-3 months. This guy did a solid job on it! Seeing it though, I like leaving the kites but I don't think I wanna leave the 001. Also, I feel like it would look better with the blast shield, perhaps with an autobot logo where the skull used to be. Best thing about seeing this is it really answers a question in my mind about if all the little "no step" etc. decals would be a distraction on a transformer, and I think the answer to that question is no.

[Lolicon]

Probably the rate hikes are straight from DHL. Even Amazon shipping has gone up quite a bit since the pandemic started.

[sh9000]

3 hours ago, nightmareB4macross said:

A DX Custom Jetfire found on FB.

 

That’s a cool custom.

[Lolicon]

4 hours ago, F360 said:

I would have to say the one with higher shipping is using a bigger shipping box.  bigger dimension = higher shipping cost for DHL. 

Indeed. For DHL the size of the box increases the price of shipping a lot more than the weight. 

[Slave IV]

For me Amazon Shipping has been inconsistently priced. Before the craze, it was usually a flat 1600Y + 600Y per additional item. No matter the size or weight. Since the craze started, I’ve paid less than 1600Y for fairly large items and more than 2000Y for very small items. These are all items sold by AJ, not 3rd party sellers. Either way, I’ve found them to so far be reasonable enough between the price guarantee and the shipping to still be the cheapest or close to within single digit dollars of the cheapest options I can find. Just wish they had more stock or consistent timing and availability of these things. 

[sqidd]

2 hours ago, RedComet said:

Oh man, well that beats my project to do the same by a good 2-3 months. This guy did a solid job on it! Seeing it though, I like leaving the kites but I don't think I wanna leave the 001. Also, I feel like it would look better with the blast shield, perhaps with an autobot logo where the skull used to be. Best thing about seeing this is it really answers a question in my mind about if all the little "no step" etc. decals would be a distraction on a transformer, and I think the answer to that question is no.

Man, no heat shield with logo or dick sticker? Shameful. And why is there a pilot...........in a robot?

He won the battle. But you will win the war. Yours is going to be better.

[nightmareB4macross]

2 hours ago, sqidd said:

Man, no heat shield with logo or dick sticker? Shameful. And why is there a pilot...........in a robot?

He won the battle. But you will win the war. Yours is going to be better.

Looking forward to Red Comets efforts 2-3 months from now.  Plenty of time to track and record what should have been better on an already achieved attempt.

But given what Red Comet has done I have faith and hope he pulls through.

 

[DYRL VF-1S]

9 hours ago, RedComet said:

Oh man, well that beats my project to do the same by a good 2-3 months. This guy did a solid job on it! Seeing it though, I like leaving the kites but I don't think I wanna leave the 001. Also, I feel like it would look better with the blast shield, perhaps with an autobot logo where the skull used to be. Best thing about seeing this is it really answers a question in my mind about if all the little "no step" etc. decals would be a distraction on a transformer, and I think the answer to that question is no.

 

6 hours ago, sqidd said:

Man, no heat shield with logo or dick sticker? Shameful. And why is there a pilot...........in a robot?

He won the battle. But you will win the war. Yours is going to be better.

 

4 hours ago, nightmareB4macross said:

Looking forward to Red Comets efforts 2-3 months from now.  Plenty of time to track and record what should have been better on an already achieved attempt.

But given what Red Comet has done I have faith and hope he pulls through.

 

I'm looking forward to it as well @RedComet! I think you'll crush it.

[SilentH]

For the first time ever, im hesitating to open these toys.

thanks to @mantisfists for the Mandarake tip on Max

thanks to @sqidd for Hikaru and Kakizaki

Edited October 10, 2020 by SilentH

[DYRL VF-1S]

1 hour ago, SilentH said:

For the first time ever, im hesitating to open these toys.

thanks to @mantisfists for the Mandarake tip on Max

thanks to @sqidd for Hikaru and Kakizaki

Welcome!!! Enjoy them.. They are fine specimens - half toy / half collectible / 100% fun.

[Slave IV]

Yeah @SilentH open and enjoy at least one if not all of those! If you are worried about anything, just do what any “true” Macross collector would do and buy three more each. 

[Anasazi37]

24 minutes ago, Slave IV said:

Yeah @SilentH open and enjoy at least one if not all of those! If you are worried about anything, just do what any “true” Macross collector would do and buy three more each. 

I think you're one short, if you're following the @tekering and @sqidd methods of collecting valks:

• one to display in Fighter mode
• one to display in Gerwalk mode
• one to display in Battroid mode
• one MISB backup
• one MISB backup to the MISB backup

[Slave IV]

21 minutes ago, Anasazi37 said:

I think you're one short, if you're following the @tekering and @sqidd methods of collecting valks:

• one to display in Fighter mode
• one to display in Gerwalk mode
• one to display in Battroid mode
• one MISB backup
• one MISB backup to the MISB backup

x2 for every “outfit” as well...like SSP, GBP or whatever. 

[Sanity is Optional]

I just settle for 2 of each, and let variants handle the posing/outfit differences.

[borgified]

1 hour ago, Slave IV said:

Yeah @SilentH open and enjoy at least one if not all of those! If you are worried about anything, just do what any “true” Macross collector would do and buy three more each. 

 

1 hour ago, Anasazi37 said:

I think you're one short, if you're following the @tekering and @sqidd methods of collecting valks:

• one to display in Fighter mode
• one to display in Gerwalk mode
• one to display in Battroid mode
• one MISB backup
• one MISB backup to the MISB backup

 

1 hour ago, Slave IV said:

x2 for every “outfit” as well...like SSP, GBP or whatever. 

 

22 minutes ago, Sanity is Optional said:

I just settle for 2 of each, and let variants handle the posing/outfit differences.

Time to cue up this song.

 

[borgified]

Back up for grabs

DX VF-1s Hikaru for 28k yen

https://order.mandarake.co.jp/order/detailPage/item?itemCode=1149706388&ref=list&keyword=マクロス&lang=en

Missile set for 9k yen

https://order.mandarake.co.jp/order/detailPage/item?itemCode=1112611395&ref=list&keyword=マクロス&lang=en

[Anasazi37]

10 hours ago, Slave IV said:

x2 for every “outfit” as well...like SSP, GBP or whatever. 

Good point

[RedComet]

On 10/10/2020 at 8:39 PM, Slave IV said:

x2 for every “outfit” as well...like SSP, GBP or whatever. 

Speaking of outfits, I wonder if I could find someone on etsy to make a Zentradi uniform for my Max 1A, would be great to have it with small wires so it can billow out behind him for this pose. Apparently it has been done for the 1/60

 

[Slave IV]

42 minutes ago, RedComet said:

Speaking of outfits, I wonder if I could find someone on etsy to make a Zentradi uniform for my Max 1A, would be great to have it with small wires so it can billow out behind him for this pose. Apparently it has been done for the 1/60

 

Yeah, that thing is ridiculously expensive now. I’d take one but I don’t need it more than I need $30. 

[nightmareB4macross]

1 hour ago, RedComet said:

Speaking of outfits, I wonder if I could find someone on etsy to make a Zentradi uniform for my Max 1A, would be great to have it with small wires so it can billow out behind him for this pose. Apparently it has been done for the 1/60

 

You could buy an outfit that resembles the Zentradi suit and add a little paint and wiring to make it look the part.

All in at about 20 bucks.

[weiser21]

https://www.amazon.co.jp/DX超合金-劇場版VF-1A-バルキリー（柿崎速雄機）-超時空要塞マクロス-愛・おぼえていますか/dp/B089WGZJDG/ref=sr_1_4?__mk_ja_JP=カタカナ&dchild=1&keywords=dx+chogokin&qid=1598886867&rnid=2493949051&sr=8-4

Kaki from AJ for $274 shipped to USA.

[borgified]

DX SSP for 14k yen (Item A, Box B)

https://www.amiami.com/eng/detail/?gcode=FIGURE-054489-R

Edited October 13, 2020 by borgified

[Slave IV]

24 minutes ago, nightmareB4macross said:

You could buy an outfit that resembles the Zentradi suit and add a little paint and wiring to make it look the part.

All in at about 20 bucks.

That looks really good! Only thing is I don’t want to buy 3 more Max 1As. 

[nightmareB4macross]

8 minutes ago, Slave IV said:

That looks really good! Only thing is I don’t want to buy 3 more Max 1As. 

Thanks.

Having three or more each isn’t a bad thing.

[Slave IV]

12 minutes ago, nightmareB4macross said:

Thanks.

Having three or more each isn’t a bad thing.

In case I do decide to attempt a project like this, do you mind sharing what the base outfit is?

[nightmareB4macross]

It’s a 1/6th scale German trench coat. There are plenty of providers of this scale.