borgified Posted December 3, 2017 Posted December 3, 2017 2 minutes ago, Chronocidal said: Unless there are some huge improvements, it might take Arcadia making one in that scheme for me to bite, hehe. I think that Arcadia would be making the gaps more flush with the valk and stabilizing the wings to accommodate both the fuel tanks and the missiles. Tighter tolerances will be also in implemented as well. 3 minutes ago, davidwhangchoi said: i hope Arcadia steps up their game, i'm in for the sv-51 as usually Arcadia's sculpts are far better than bandai's but i'm worried that they can't compete without many new molds announced I also agree in this as well. Quote
arbit Posted December 3, 2017 Posted December 3, 2017 (edited) 9 hours ago, Dobber said: I displayed my custom that way. It saved a lot of space and I thought it looked cool too. Your custom is better than the real thing! Awesome skills. What painting materials do you use? I wonder how you keep it form scratching during transformation. Edited December 3, 2017 by arbit Quote
Dobber Posted December 3, 2017 Posted December 3, 2017 49 minutes ago, arbit said: Your custom is better than the real thing! Awesome skills. What painting materials do you use? I wonder how you keep it form scratching during transformation. I used Testors MM paints. The only joints that tended to rub a bit where the wing root joints. Other than that it seemed to hold up pretty well. I sold it to a member here several years ago so I’m not sure how it looks now. General transformations didn’t seem to be a problem though. Chris Quote
Sildani Posted December 3, 2017 Posted December 3, 2017 Damn, would you do another for money...? Also, T-Rex is assisting Arcadia with the redesign. It’ll be done right I’m sure, but I’m not certain there was enough wrong with Yamato’s effort to justify existing owners grabbing another, especially considering the inevitable Arcadia up-charge. Quote
mickyg Posted December 4, 2017 Posted December 4, 2017 I owned a Nora version for a brief time and my thoughts were similar to what others have stated for the 1/48 VF-1s (which I've never owned): much thicker panel lines, less tight tolerances and generally, engineering that simply looks a bit simpler. I'd guess the best comparison is just looking at the Yamato vs Arcadia VF-0 though. Seems they had similar improvements. I'm predicting the same furvor as was shown for the "new" Phoenix when it hit. Quote
Killaforevah Posted December 4, 2017 Posted December 4, 2017 This might be a dumb question, but are there any photos of the actual prototype yet? I would love to see if it is an improvement over the yamato version Quote
Ignacio Ocamica Posted December 4, 2017 Posted December 4, 2017 Just the CAD files. And it looks great!!!! The proportions are spot on. Quote
505thAirborne Posted December 4, 2017 Posted December 4, 2017 While I have the Yamato Ivanov & Nora types, I'll gladly get this one. If it's the quality of the Arcadia VF-0S then I'm sold! Quote
Killaforevah Posted December 4, 2017 Posted December 4, 2017 2 hours ago, 505thAirborne said: While I have the Yamato Ivanov & Nora types, I'll gladly get this one. If it's the quality of the Arcadia VF-0S then I'm sold! Is the yamato version very similar to the CAD files? or arcadia is revamping the whole model Quote
no3Ljm Posted December 4, 2017 Posted December 4, 2017 23 minutes ago, Killaforevah said: Is the yamato version very similar to the CAD files? or arcadia is revamping the whole model Hard to tell. But I'm pretty sure they're revamping the whole model. Because what's the point if they're just doing portions only? Think of this like a renewal or version 2. Quote
mechaninac Posted December 4, 2017 Posted December 4, 2017 25 minutes ago, Killaforevah said: Is the yamato version very similar to the CAD files? or arcadia is revamping the whole model To the best of my knowledge, the Arcadia version is an all new mold. Truth be told, with the exception of some gappiness, some floppiness, and weakness in the wings (their tendency to be barely able to support their own weight and inability to support the boosters and/or ordnance, the Yamato toy is a really good representation of the SV-51. I have the Ivanov and Nora versions and find them quite adequate... but if Arcadia's proves a significant improvement over the older generation one, I'll feel compelled to dip into this new line just as I did with Arcadia's VF-0s. Quote
Dobber Posted December 5, 2017 Posted December 5, 2017 One difference I can see is how the VTOL panel can open on this. I don’t recall the Yamato version being able to do that. Chris Quote
Lolicon Posted December 5, 2017 Posted December 5, 2017 6 hours ago, Killaforevah said: Is the yamato version very similar to the CAD files? or arcadia is revamping the whole model It'll be completely retooled from the ground up. The old SV-51 is from the same era as the 1/48 VF-1 and I don't think Arcadia wants to use such an ancient mold. I wouldn't be surprised if they were lost or broken. I believe the YF-21 was the last of that generation of molds. They're pretty easy to spot. The molding is not as sharp and the panel lines are way less fine than what we've gotten in recent years. Quote
Chronocidal Posted December 5, 2017 Posted December 5, 2017 Only problem with being "new from the ground up" doesn't mean it'll actually change size, shape, or function. It'll likely be almost identical until you look at it up close, same as the VF-0. If it improves that much, I'll probably still grab one or two.. hard to say though. I'd love some new schemes. Quote
Lolicon Posted December 5, 2017 Posted December 5, 2017 (edited) 20 minutes ago, Chronocidal said: Only problem with being "new from the ground up" doesn't mean it'll actually change size, shape, or function. It'll likely be almost identical until you look at it up close, same as the VF-0. If it improves that much, I'll probably still grab one or two.. hard to say though. I'd love some new schemes. Of course it'll still be an SV-51 with more or less the same size, shape, transformation, etc. But if you can't tell the difference between a Yamato VF-0 and an Arcadia VF-0, even at a glance, then I recommend some new glasses. They're not even the same color. Edited December 5, 2017 by Lolicon Grammar Quote
borgified Posted December 8, 2017 Posted December 8, 2017 On 2017-12-04 at 4:07 PM, Dobber said: One difference I can see is how the VTOL panel can open on this. I don’t recall the Yamato version being able to do that. Chris Actually the Yamato did have this function. Time: Approximately 1:20 to 1:40 and 1:50 to 2:00. I actually like the Nora version rather than the Ivanov or the mass release versions. I'm sure that Arcadia can make the colours more vibrant than compared to Yamato's. Quote
Dobber Posted December 8, 2017 Posted December 8, 2017 4 hours ago, borgified said: Actually the Yamato did have this function. Time: Approximately 1:20 to 1:40 and 1:50 to 2:00. I actually like the Nora version rather than the Ivanov or the mass release versions. I'm sure that Arcadia can make the colours more vibrant than compared to Yamato's. Nope, check again. The heat shield can’t raise UP on the Yamato version like what is shown on Arcadia’s CAD. Yamato’s only folds down for bathroom mode. Yes the fan details are there but again the heat shield can’t lift up to reveal that in fighter on the Yamato version. Chris Quote
Arkham Posted December 8, 2017 Posted December 8, 2017 Honest question: If the SV-51 was designed for atmospheric conditions, and therefore no atmospheric re-entry, can it still be called "heat shield"? Quote
Sandman Posted December 8, 2017 Posted December 8, 2017 On 12/3/2017 at 12:30 PM, Dobber said: Thanks guys! If you’re interested here is the Album with more pictures of all three modes. Damn, i love that scheme. I wish I could've bought that. Quote
arrow Posted January 7, 2018 Posted January 7, 2018 My Yamato SV is one of the rare ones in my collection that I have never transformed from fighter. Quote
Ridden001 Posted January 8, 2018 Posted January 8, 2018 On 12/8/2017 at 1:10 PM, Arkham said: Honest question: If the SV-51 was designed for atmospheric conditions, and therefore no atmospheric re-entry, can it still be called "heat shield"? It's primary purpose is an armor plate for battroid to protect the pilot, but Hikaru went Macgyver and activated it in fighter and called it a heat shield. Because it was badass, the term sticks I guess. What is more badass is that Roy was able to fly into space after saving Hikaru and his girl in a naked VF-1S with no booster or super pack. Quote
Lolicon Posted January 8, 2018 Posted January 8, 2018 1 hour ago, Ridden001 said: It's primary purpose is an armor plate for battroid to protect the pilot, but Hikaru went Macgyver and activated it in fighter and called it a heat shield. Because it was badass, the term sticks I guess. What is more badass is that Roy was able to fly into space after saving Hikaru and his girl in a naked VF-1S with no booster or super pack. And Ozma could outrun a Super Messiah with full armor on. You don't become skull leader by letting pesky things like "hardware limitations" get in the way. Quote
anime52k8 Posted January 10, 2018 Posted January 10, 2018 On 12/8/2017 at 7:06 AM, Dobber said: Nope, check again. The heat shield can’t raise UP on the Yamato version like what is shown on Arcadia’s CAD. Yamato’s only folds down for bathroom mode. I'm really curious what bathroom mode looks like. Quote
Sanity is Optional Posted January 10, 2018 Posted January 10, 2018 Well, whatever it is, it's probably crouched down. Quote
Dobber Posted January 10, 2018 Posted January 10, 2018 8 hours ago, anime52k8 said: I'm really curious what bathroom mode looks like. Lol, I just noticed that! Stupid auto-correct. Chris Quote
frankell05 Posted January 11, 2018 Posted January 11, 2018 Iz gonna be the most esplosive modes of all Lucy Quote
borgified Posted January 14, 2018 Posted January 14, 2018 On 2018-01-11 at 10:56 AM, frankell05 said: Iz gonna be the most esplosive modes of all Lucy Or do you rather have a G1 Transformers Master Force D-311 Black Zarak with GPS and see it crumble into gold dust when you open the box to see the contents? I'll think that upgraded SV-51 will be better than the original release. Quote
RealJayDee Posted January 16, 2018 Posted January 16, 2018 Im so glad since I was never able to find an sv 51!!! Quote
borgified Posted January 16, 2018 Posted January 16, 2018 40 minutes ago, RealJayDee said: Im so glad since I was never able to find an sv 51!!! Actually.. Manda and Jungle Japan has some SV-51 sitting around. If you want to get the Nora version, they're gone, however the Ivanov (maybe the MK. 1 version) and the Mass production versions are for grabs. If not, then you're welcome to get the SV-262 as another alternative. Quote
no3Ljm Posted January 16, 2018 Posted January 16, 2018 (edited) Hope we get to see some prototype pics during WonderFest2018 since it will be a year since the announcement coming this February. Edited January 16, 2018 by no3Ljm Quote
505thAirborne Posted January 17, 2018 Posted January 17, 2018 2 hours ago, no3Ljm said: Hope we get to see some prototype pics during WonderFest2018 since it will be a year since the announcement coming this February. Same here, looking forward to see what improvements Arcadia has made in it's design vs. the old Yamato. Quote
Lolicon Posted January 17, 2018 Posted January 17, 2018 Has it already been a year since the first announcement? Good grief. Hope they have something to show after all this time. Quote
borgified Posted January 20, 2018 Posted January 20, 2018 Got the last SV-51 Nora from Manda (used and complete). Just fiddled with it in Jet mode (transformation to Gerwalk and Battriod will be done on a later date) and there are a few bugs that I have found on my copy [not deal breaker to me as I'm going to leave it fully armed, still considering Arcadia's take]. Not going to list the flaws on my copy as Jenius has covered to a degree in his reviews. Hopefully that Arcadia catches the flaws from Yamato's and make the proper changes during the assembly line. Waiting to see the new revised version of the SV-51 in a months time. Quote
RealJayDee Posted February 14, 2018 Posted February 14, 2018 Cmon Arcadia!!! We need updates!! I need dis!!!!! Quote
HardlyNever Posted February 14, 2018 Posted February 14, 2018 43 minutes ago, RealJayDee said: Cmon Arcadia!!! We need updates!! I need dis!!!!! This was first announced at last year's Wonderfest (this year's is this Sunday (2/18)). So... we might hear something then. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.