JakCrow Posted January 15, 2019 Posted January 15, 2019 48 minutes ago, eXis10z said: Doesn't look removable and from the vid the paintwork needs improvement. Looks uneven, blotchy and many obvious air bubbles on the surface. Not sure if general production pieces will have improved QC. I'm guessing both the Freedom and Kshatriya are pre-production, especially the Freedom with all the 3d printed parts that were in the kit previewed. The MC Kshatriya has a lot of great mechanical detail that the Steel Legend figure just doesn't have. Quote
VF-Zer0S Posted January 15, 2019 Posted January 15, 2019 The Metal Myth Dragon king looks amazing. I wish these 3rd party companies would tackle a Gp02a. Quote
eXis10z Posted January 15, 2019 Posted January 15, 2019 1 hour ago, JakCrow said: I'm guessing both the Freedom and Kshatriya are pre-production, especially the Freedom with all the 3d printed parts that were in the kit previewed. Yes, believe the reviewer mentioned that. Hope the general release will have these flaws fixed. It is a really nice design that will look good on display. God knows if we will get an official Bandai MB Freedom 2.0. Quote
slaginpit Posted January 16, 2019 Author Posted January 16, 2019 Have you noticed the lean on the right shoulder. Yikes. Over time that would concern me. Also No3Ljm They are not as expensive as the Bandai MBs and Macross stuff Quote
eXis10z Posted January 16, 2019 Posted January 16, 2019 I read that 2 3rd party Justice are on their way by 2 different makers but until I see some pics will take it with a pinch of salt. Quote
HG Blows Posted January 16, 2019 Posted January 16, 2019 Show Z store has the freedom 2.0 up for preorder again, also strike freedom, I guess they're doing another run... Quote
no3Ljm Posted January 16, 2019 Posted January 16, 2019 3 minutes ago, HG Blows said: Show Z store has the freedom 2.0 up for preorder again, also strike freedom, I guess they're doing another run... Thanks for the heads up, sir! Also there's a PO for 00 XN-Raiser on both regular and Trans-Am versions. 00 XN-Raiser (Preorder) https://showzstore.com/pre-order-metal-club-mc-metalgearmodels-xn00r-mg-1-100-00-xn-raiser-gn-000-gnr-010-xn-00r-gundam-00_p1206.html 00 XN-Raiser Trans-Am (Preorder) https://showzstore.com/pre-order-metal-club-mc-metalgearmodels-xn00r-mg-1-100-00-xn-raiser-gn-000-gnr-010-xn-00r-gundam-00-trans-am-mode-version_p1207.html Freedom Gundam Ver.2 by Wuming (Released) https://showzstore.com/wuming-wmnl-noname-1-100-mg-zgmf-x10a-zgmfx10a-freedom-gundam-version-20_p1203.html Freedom Gundam Ver.2 by MetalClub (Preorder) https://showzstore.com/pre-order-metal-club-musclebear-mc-1-100-zgmf-x10a-freedom-gundam-version-20_p1132.html Can't believe that they're going to flood the KO market with different Freedom releases. Not sure which Freedom to get. Quote
slaginpit Posted January 17, 2019 Author Posted January 17, 2019 something tells me that plastic will yellow.It looks cheap Quote
kajnrig Posted January 17, 2019 Posted January 17, 2019 (edited) I kind of hate that "Dragon King" on principle. I know it's common to basically steal conversion kits for a lot of these third-party figures, but it still bothers me now and again to see it happen. EDIT: For context, the original conversion kit: http://www.gundammodelcenter.com/model-bing-go-mbg-barbatos-dragon-king-resin-gk-kit https://www.shop2000.com.tw/GK-M/product/p26017201 Edited January 17, 2019 by kajnrig Quote
no3Ljm Posted January 17, 2019 Posted January 17, 2019 1 hour ago, kajnrig said: I kind of hate that "Dragon King" on principle. I know it's common to basically steal conversion kits for a lot of these third-party figures, but it still bothers me now and again to see it happen. It's just cheaper to imitate and make a profit. Quote
Graham Posted January 17, 2019 Posted January 17, 2019 Somebody, please just make Xeku Eins and Xeku Zwei figures (from Gundam Sentinel), sized to the Robot Spirits toys. Quote
JakCrow Posted January 17, 2019 Posted January 17, 2019 (edited) 15 hours ago, slaginpit said: something tells me that plastic will yellow.It looks cheap You mean kinda like the GFFMC Unicorn? Another company is doing their own take on this Dragon King thing. They do look pretty amazing. https://www.gundamkitscollection.com/2019/01/motor-nuclear-reveals-2-new-gundam.html Edited January 17, 2019 by JakCrow Quote
doomgart Posted January 18, 2019 Posted January 18, 2019 Hello, if you take a breath from 1/100 Kshatriyas, here are another "bad guy": https://www.facebook.com/pg/Samueldecal/photos/?tab=album&album_id=10156777092976897&__xts__[0]=68.ARDK5yPreAZImAri-e5o3jHLRxxCf_U4UTgnPjcbBgh6qbdd41p8cTIu3p9DrrKeJiFsYiLaFEM5VTX4PnRFtnHEWoAeHHk4cp_kphiT_5UY2EHHbrakaFAEzAqLPlImUx1tjprsiox9vH0x_ZvQFBATUAGbEl8-fre9qqlqHLy1hq6hQ7g06WRFKlPju3TgsOZ3Iqj9lK36RKXqMujBRdBMEDSbTD7CDUidJhP87wJgIUlIf6kSgjEdkYsXF9GxbRmzDAO32y38gsww4FYkn-x0eAOiTjrfWF9tVYex1MX4Eo8WB7cmT2Ewd-H3946gFtPfsHBEfB3LTnDG8o9W&__tn__=-UC-R Quote
slaginpit Posted January 18, 2019 Author Posted January 18, 2019 On 1/17/2019 at 2:54 PM, JakCrow said: You mean kinda like the GFFMC Unicorn? Another company is doing their own take on this Dragon King thing. They do look pretty amazing. https://www.gundamkitscollection.com/2019/01/motor-nuclear-reveals-2-new-gundam.html Whew quickly ran to my cabinet to check. AND NOPE. Still white as snow. :) Quote
slaginpit Posted January 18, 2019 Author Posted January 18, 2019 8 hours ago, doomgart said: Hello, if you take a breath from 1/100 Kshatriyas, here are another "bad guy": https://www.facebook.com/pg/Samueldecal/photos/?tab=album&album_id=10156777092976897&__xts__[0]=68.ARDK5yPreAZImAri-e5o3jHLRxxCf_U4UTgnPjcbBgh6qbdd41p8cTIu3p9DrrKeJiFsYiLaFEM5VTX4PnRFtnHEWoAeHHk4cp_kphiT_5UY2EHHbrakaFAEzAqLPlImUx1tjprsiox9vH0x_ZvQFBATUAGbEl8-fre9qqlqHLy1hq6hQ7g06WRFKlPju3TgsOZ3Iqj9lK36RKXqMujBRdBMEDSbTD7CDUidJhP87wJgIUlIf6kSgjEdkYsXF9GxbRmzDAO32y38gsww4FYkn-x0eAOiTjrfWF9tVYex1MX4Eo8WB7cmT2Ewd-H3946gFtPfsHBEfB3LTnDG8o9W&__tn__=-UC-R oh frakk off. My wallet is dying....lol Quote
no3Ljm Posted January 18, 2019 Posted January 18, 2019 That Sazabi looks over-detailed compared to both Kshatriya’s. Quote
dragonstar1982 Posted January 19, 2019 Posted January 19, 2019 You can never have too many sazabi's lol. I'll be all over this one Quote
Grey728 Posted January 19, 2019 Posted January 19, 2019 Show.Z.Store has a link to the Metal Gear Kshatriya manual on their website. I pre-ordered the Steel Legend one but the detail on the Metal Gear one looks amazing.. I'm torn and don't know which one to get! http://bbs.78dm.net/forum.php?mod=viewthread&tid=616726&page=1&extra=#pid8985589 Quote
dragonstar1982 Posted January 19, 2019 Posted January 19, 2019 2 hours ago, no3Ljm said: That Sazabi looks over-detailed compared to both Kshatriya’s. The panels will probably close like the ver ka Master grade. The figure it's self looks like the ver ka conversion kit Quote
slaginpit Posted January 19, 2019 Author Posted January 19, 2019 2 hours ago, Grey728 said: Show.Z.Store has a link to the Metal Gear Kshatriya manual on their website. I pre-ordered the Steel Legend one but the detail on the Metal Gear one looks amazing.. I'm torn and don't know which one to get! http://bbs.78dm.net/forum.php?mod=viewthread&tid=616726&page=1&extra=#pid8985589 get both. Many people by Macross jets. But for the price of one decaying Valk you can get two Metal Build Kysh's Quote
JakCrow Posted January 19, 2019 Posted January 19, 2019 5 hours ago, slaginpit said: Whew quickly ran to my cabinet to check. AND NOPE. Still white as snow. You're lucky. I've seen mixed reports about the white GFFMC unicorn figures discoloring after being taken out of their boxes. I have the older MC figure of the Blast Impulse that is now completely yellowed while never being in the sun once, and even it's shield that was sitting in a storage box for years also discolored over the same time too. Bandai apparently used some plastics that had the habit of oxidizing badly for the GFF lines at one point. Quote
slaginpit Posted January 19, 2019 Author Posted January 19, 2019 Not sure I posted this but Man I have this puppy pre-ordered. Gawd dam Chinese. Putting A billion dollar company to shame! Quote
no3Ljm Posted January 19, 2019 Posted January 19, 2019 4 hours ago, dragonstar1982 said: The panels will probably close like the ver ka Master grade. The figure it's self looks like the ver ka conversion kit Ok. I think I might bite on that Sazabi in the hopes that there might be a Nu-Gundam down in their pipeline. Or they can do a Sinanju too. ^_^ Quote
doomgart Posted January 19, 2019 Posted January 19, 2019 Hope Sinanju will be their next release. Quote
doomgart Posted January 19, 2019 Posted January 19, 2019 5 hours ago, dragonstar1982 said: The panels will probably close like the ver ka Master grade. The figure it's self looks like the ver ka conversion kit The red figure are conversion kit, here is a prototype of metal build wich based on resin kit: More pics here: http://www.inask.net/blog-entry-1412.html Quote
mog_kupo Posted January 21, 2019 Posted January 21, 2019 Guys, anyone has the MC 00 Raiser? Im thinking of gettin one since the Bandai its so damn expensive now but would love to hear some opinions on it first Just found a sotre with some units http://www.hobbymission.com/index.php?route=product/product&path=104&product_id=352 Or should I wait a bit more for the XN 00R https://showzstore.com/pre-order-metal-club-mc-metalgearmodels-xn00r-mg-1-100-00-xn-raiser-gn-000-gnr-010-xn-00r-gundam-00_p1206.html Quote
slaginpit Posted January 21, 2019 Author Posted January 21, 2019 Just got a shipping notice whooo will do a review comparing both Quote
JakCrow Posted January 21, 2019 Posted January 21, 2019 (edited) 35 minutes ago, mog_kupo said: Guys, anyone has the MC 00 Raiser? Im thinking of gettin one since the Bandai its so damn expensive now but would love to hear some opinions on it first Just found a sotre with some units http://www.hobbymission.com/index.php?route=product/product&path=104&product_id=352 Or should I wait a bit more for the XN 00R https://showzstore.com/pre-order-metal-club-mc-metalgearmodels-xn00r-mg-1-100-00-xn-raiser-gn-000-gnr-010-xn-00r-gundam-00_p1206.html I have the MC 00 Raiser and Seven Swords and they're both great figures for the price. I also have the XN Raiser on the way. You'd probably only really notice most differences if you put it right up against the Bandai original. Here's a video comparing the two. I thought for sure I knew which one was the original and which was the MC, but I was wrong when the guy showed which was which. Edited January 21, 2019 by JakCrow Quote
no3Ljm Posted January 21, 2019 Posted January 21, 2019 1 hour ago, mog_kupo said: Guys, anyone has the MC 00 Raiser? Im thinking of gettin one since the Bandai its so damn expensive now but would love to hear some opinions on it first Just found a sotre with some units http://www.hobbymission.com/index.php?route=product/product&path=104&product_id=352 Or should I wait a bit more for the XN 00R https://showzstore.com/pre-order-metal-club-mc-metalgearmodels-xn00r-mg-1-100-00-xn-raiser-gn-000-gnr-010-xn-00r-gundam-00_p1206.html I have both MC 00Raiser and 007Swords along with Bandai’s 00Raiser (set release) and the 007Swords. They have slight differences from color to markings. Bandai’s marking looks clearer and cleaner compared to MC releases. However, the big difference is that these MC ones have tighter joints than its original counterpart. With the price it’s going for on th original, it’s better to get the MC brand. Do note that the MC XNRaiser release might not have the weapons and accessories that came with the 00Raiser version such as the GN Sword III, etc. And we’re not sure if the Raiser itself will have its original wing attachments from than 00Raiser release. I’m also down for the XNRaiser release as well. With the prices they’re going for, it’s better to have two version of MC Raiser figures for the price of one Metal Build 00Raiser. Hope that helps. Quote
JakCrow Posted January 21, 2019 Posted January 21, 2019 XN Raiser review https://ggmara.blogspot.com/2018/11/mc_25.html Quote
no3Ljm Posted January 21, 2019 Posted January 21, 2019 (edited) 53 minutes ago, JakCrow said: XN Raiser review https://ggmara.blogspot.com/2018/11/mc_25.html Nice! I don't read Korean language. But does it confirms that it will include the standard 00Raiser Weapons and Accessories? Either way, I think it's nice to have both versions. So it's ok if it doesn't come with it. Edited January 21, 2019 by no3Ljm Quote
JakCrow Posted January 21, 2019 Posted January 21, 2019 13 minutes ago, no3Ljm said: Nice! I don't read Korean language. But does it confirms that it will include the standard 00Raiser Weapons and Accessories? Either way, I think it's nice to have both versions. So it's ok if it doesn't come with it. The photos seem to show all the parts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.