F360 Posted September 30, 2021 Posted September 30, 2021 On 9/30/2021 at 8:21 PM, Klee said: Anyone know how to remove some of the yellowing on clear plastics in KO kits? I bought a "like new" MC 00 raiser from eBay and the clear parts to hold the weapons are very yellow. I read retrobrite worked but I'm not sure how the plastic will tolerate the h2o2. Expand probably should take a photo, it would be easier to see what part and how yellow you are talking about. Quote
Klee Posted September 30, 2021 Posted September 30, 2021 (edited) On 9/30/2021 at 8:42 PM, F360 said: probably should take a photo, it would be easier to see what part and how yellow you are talking about. Expand Oops. Here are the parts. Edited September 30, 2021 by Klee embed pic Quote
F360 Posted September 30, 2021 Posted September 30, 2021 (edited) On 9/30/2021 at 8:46 PM, Klee said: Oops. Here are the parts. Expand This will be similar to those headlights on cars getting yellowed . you can try to make a paste with baking soda and water and then rub it all over it to removed the yellow top layer.. can also try these: baking soda tooth pasta. blue magic aluminum polish compound (or other polishing compound) pretty much you are just removing the top yellow layer from the clear plastic maybe try it on the small piece first . Edited September 30, 2021 by F360 Quote
Klee Posted October 1, 2021 Posted October 1, 2021 On 9/30/2021 at 11:22 PM, F360 said: This will be similar to those headlights on cars getting yellowed . you can try to make a paste with baking soda and water and then rub it all over it to removed the yellow top layer.. can also try these: baking soda tooth pasta. blue magic aluminum polish compound (or other polishing compound) pretty much you are just removing the top yellow layer from the clear plastic maybe try it on the small piece first . Expand I'll give it a shot. Thanks 😀 Quote
Klee Posted October 3, 2021 Posted October 3, 2021 (edited) Tried the baking soda mix didn’t remove the yellowing, the vinegar and paint thinner also didn’t work but I noticed the plastic is actually cracked right down the middle I may just leave it at this point. Has anyone seen the Zhongtian MB Exia R3 on GMC? Contemplating on picking it up but the base says “GONOnM EXIA” 🤨. Users on bilibili says it uses the MC mold. https://youtu.be/FSGKCn1zK0c Edited October 3, 2021 by Klee Quote
sqidd Posted October 3, 2021 Posted October 3, 2021 Moshow knocking another one out of the park. Quote
68whiskey Posted October 19, 2021 Posted October 19, 2021 Just found this thread. I just received my 1/72 Strike and all the reviews are correct. Its of poor quality Also now I need to buy a KO Snow White gundam Quote
F360 Posted October 19, 2021 Posted October 19, 2021 Thanks for the warning. I was tempted since it’s a different interpretation of the strike , but they don’t seem to have any favorable reviews. I’m good with my 1/72 Mecha Worrior 😂 . Quote
dragonstar1982 Posted October 19, 2021 Posted October 19, 2021 I have to disagree here. I've had my for over a week now and I've had no problems what so ever. The paint is crisp, and all the joints are tight on my copy. Is it the best figure out, no but for $130 I think it was awesome and worth it. With figures like this everyone will have different experiences. I've seen people spend more and get a lot less. I say if your a fan of the strike you should check it out. Quote
blitz Posted October 19, 2021 Posted October 19, 2021 I got my first copy of the MC Model Gundam Wing Custom Snow Prelude. Mine has a couple paint issues, the skirt looks like paint rubbed off from friction on the surface and one of the edges on the torso also suffered from paint rub. I blame the poor packaging on these issues I have. Your mileage may vary. These can be fixed with a brush and some color matching. As Indicated in the review video, the thigh portion of the knee pads aren't attached to the lower portion out of the box. Take care and slowly lift the sides of the pad to get the pegs seated to the lower part.(https://youtu.be/1Ugi-HJBZqQ?t=63) As seen at this timestamp in the video. The "stand" adapter (connects to tain area of the suit) may not hold the figure securely. Lift the skirt up and tighten the screw used to assemble the lower torso. It is behind the left leg. That is all I have to report about this figure so far, I am still trying to figure it out. I have another in the mail, maybe I will have better luck with the paint on the next one. I will upload some photos in a couple days. Overall, I recommend it if you missed out on the official one. It is fiddly to handle but that comes with the territory of any winged figure with so much going on. Official or KO. It does not come with instructions, refer to the reviews/overview videos out there to see how it all goes together. Quote
brannon Posted October 19, 2021 Posted October 19, 2021 On 10/19/2021 at 6:26 AM, blitz said: I got my first copy of the MC Model Gundam Wing Custom Snow Prelude. Mine has a couple paint issues, the skirt looks like paint rubbed off from friction on the surface and one of the edges on the torso also suffered from paint rub. I blame the poor packaging on these issues I have. Your mileage may vary. These can be fixed with a brush and some color matching. As Indicated in the review video, the thigh portion of the knee pads aren't attached to the lower portion out of the box. Take care and slowly lift the sides of the pad to get the pegs seated to the lower part.(https://youtu.be/1Ugi-HJBZqQ?t=63) As seen at this timestamp in the video. The "stand" adapter (connects to tain area of the suit) may not hold the figure securely. Lift the skirt up and tighten the screw used to assemble the lower torso. It is behind the left leg. That is all I have to report about this figure so far, I am still trying to figure it out. I have another in the mail, maybe I will have better luck with the paint on the next one. I will upload some photos in a couple days. Overall, I recommend it if you missed out on the official one. It is fiddly to handle but that comes with the territory of any winged figure with so much going on. Official or KO. It does not come with instructions, refer to the reviews/overview videos out there to see how it all goes together. Expand im interested in this figure who did you order from and what was the cost? Quote
blitz Posted October 19, 2021 Posted October 19, 2021 On 10/19/2021 at 11:47 AM, brannon said: im interested in this figure who did you order from and what was the cost? Expand Check 1-2 pages back, I listed two Aliexpress links. Varies from 210-220 USD + shipping. Quote
sqidd Posted October 19, 2021 Posted October 19, 2021 On 10/19/2021 at 5:29 AM, dragonstar1982 said: I have to disagree here. I've had my for over a week now and I've had no problems what so ever. The paint is crisp, and all the joints are tight on my copy. Is it the best figure out, no but for $130 I think it was awesome and worth it. With figures like this everyone will have different experiences. I've seen people spend more and get a lot less. I say if your a fan of the strike you should check it out. Expand How can you disagree? Are you saying he is confused and his joints are actually tight and the paint apps are good? You got a good copy. He got a bad copy. You can't claim it's a good figure. He can't clain it's a bad one. The only claim that can be made is their QC sucks and getting one is a lottery. Quote
Big s Posted October 19, 2021 Posted October 19, 2021 I think that’s the entire reason he disagrees. He got a good copy and the other guy got a bad sample. Although if there were more reviews one way or another, that would probably be something that would show a trend. With every release of a product, someone is likely to get a bad one. But if a lot of people get a bad one then that’s a bad product. Hopefully it was just the one bad one and everyone else has a good copy. I don’t know if these particular companies have good customer service regarding replacements or repairs Quote
F360 Posted October 19, 2021 Posted October 19, 2021 There is supposedly a 2nd batch that is not yet out. so maybe that batch will have better quality control and maybe fix the loose waist issue Quote
sqidd Posted October 19, 2021 Posted October 19, 2021 (edited) On 10/19/2021 at 11:37 PM, Big s said: I think that’s the entire reason he disagrees. He got a good copy and the other guy got a bad sample. Although if there were more reviews one way or another, that would probably be something that would show a trend. With every release of a product, someone is likely to get a bad one. But if a lot of people get a bad one then that’s a bad product. Hopefully it was just the one bad one and everyone else has a good copy. I don’t know if these particular companies have good customer service regarding replacements or repairs Expand If someone says something and someone else has a response to it that starts with "I disagree" the responder is disagreeing with what the OP said. In this case he is saying "I don't agree that yours is loose and has paint app issues". He may have not meant it that way, but that is what he typed. Yeah, I'm pedantic. We have three reviews now. Two bad. Edited October 19, 2021 by sqidd Quote
Big s Posted October 21, 2021 Posted October 21, 2021 Bad choices of words are common on threads like these. Some people are bad at grammar and others are in a rush or just tired. I find it’s best not to take things too literally Quote
sqidd Posted October 21, 2021 Posted October 21, 2021 On 10/21/2021 at 1:35 AM, Big s said: Bad choices of words are common on threads like these. Some people are bad at grammar and others are in a rush or just tired. I find it’s best not to take things too literally Expand Cool, you do you. I'll do me. Quote
Draft Posted November 4, 2021 Posted November 4, 2021 Has anyone heard the update info of MC 1/100 Destiny Gundam Freedom color ver. and the Exia Dark matter? Quote
no3Ljm Posted November 4, 2021 Posted November 4, 2021 On 11/4/2021 at 3:51 AM, Draft said: Has anyone heard the update info of MC 1/100 Destiny Gundam Freedom color ver. and the Exia Dark matter? Expand On the item page at ShowZ, there's a comment posted by 'Alphahorizon'. Not sure if it's the same @Alphahorizon from this board. Mentioning that his order got cancelled and that the company got shut down. If Exia Dark Matter is also made by Metal Club, then it's probably has the same fate as Destiny Freedom. https://showzstore.com/metal-club-zgmf-x10a-freedom-gundam-w-destiny-gundam-color-scheme_p1815.html Quote
Draft Posted November 4, 2021 Posted November 4, 2021 On 11/4/2021 at 7:04 AM, no3Ljm said: On the item page at ShowZ, there's a comment posted by 'Alphahorizon'. Not sure if it's the same @Alphahorizon from this board. Mentioning that his order got cancelled and that the company got shut down. If Exia Dark Matter is also made by Metal Club, then it's probably has the same fate as Destiny Freedom. https://showzstore.com/metal-club-zgmf-x10a-freedom-gundam-w-destiny-gundam-color-scheme_p1815.html Expand I've heard of that before, too. But yesterday the local dealer here stated that they are re-issueing both of them again (I aint quite that familiar with the dealer, so I didnt ask him much). Quote
izrolan Posted November 5, 2021 Posted November 5, 2021 On 11/4/2021 at 3:51 AM, Draft said: Has anyone heard the update info of MC 1/100 Destiny Gundam Freedom color ver. and the Exia Dark matter? Expand There are sellers accepting preorders for the Destiny Freedom color ver. on Taobao. Quote
sumyumgoy Posted November 7, 2021 Posted November 7, 2021 Received the MC Model Snow White Prelude today and have to say that I am quite happy with it. Aside from the tampo being less clear and a difference in the neck joint making the head sit closer to the body (pretty negligible), it is a very good copy and hard to tell it apart from the original. Mine came with some loose (not floppy) joints that I was able to fix with Kiki. I think, for the price compared to what the Bandai is going for these days, it is quite good. The comment about it being 80-90% of the original is accurate. I wish there was an original color version! Some photos, sorry most of it is using my phone camera. Reveal hidden contents MC Model Snow White Reveal hidden contents Left - MC Model Right - Bandai (Sorry it came out blurry) Reveal hidden contents MC Model neck joint Bandai neck joint Quote
Draft Posted November 7, 2021 Posted November 7, 2021 On 11/7/2021 at 2:01 AM, sumyumgoy said: Received the MC Model Snow White Prelude today and have to say that I am quite happy with it. Aside from the tampo being less clear and a difference in the neck joint making the head sit closer to the body (pretty negligible), it is a very good copy and hard to tell it apart from the original. Mine came with some loose (not floppy) joints that I was able to fix with Kiki. I think, for the price compared to what the Bandai is going for these days, it is quite good. The comment about it being 80-90% of the original is accurate. I wish there was an original color version! Some photos, sorry most of it is using my phone camera. Reveal hidden contents MC Model Snow White Reveal hidden contents Left - MC Model Right - Bandai (Sorry it came out blurry) Reveal hidden contents MC Model neck joint Bandai neck joint Expand Glad you like it. About the copy of original color ver., it was released prior to SW prelude about half a year(or more) by the company called Pegasus (飞马). Some said it is MC, some said it is new company. But from what I've heard, the quality ain't as good as the SW prelude. Here's the link to order in Thailand. https://shopee.co.th/-Pegasus(-飞马)-Metal-Build-1-100-XXXG-00W0-WING-ZERO-EW-i.315508385.8419615721 Don't know if they'll ship abroad or not. Quote
Alphahorizon Posted November 7, 2021 Posted November 7, 2021 (edited) On 11/4/2021 at 7:04 AM, no3Ljm said: On the item page at ShowZ, there's a comment posted by 'Alphahorizon'. Not sure if it's the same @Alphahorizon from this board. Mentioning that his order got cancelled and that the company got shut down. If Exia Dark Matter is also made by Metal Club, then it's probably has the same fate as Destiny Freedom. https://showzstore.com/metal-club-zgmf-x10a-freedom-gundam-w-destiny-gundam-color-scheme_p1815.html Expand Yes indeed. If I recall it was way back it got cancelled. I believe when one of the companies that make the alternative version got shut down. There had been a good amount cancelled that day. Sad indeed. Edited November 7, 2021 by Alphahorizon Quote
Alphahorizon Posted November 8, 2021 Posted November 8, 2021 On 11/7/2021 at 2:01 AM, sumyumgoy said: Received the MC Model Snow White Prelude today and have to say that I am quite happy with it. Aside from the tampo being less clear and a difference in the neck joint making the head sit closer to the body (pretty negligible), it is a very good copy and hard to tell it apart from the original. Mine came with some loose (not floppy) joints that I was able to fix with Kiki. I think, for the price compared to what the Bandai is going for these days, it is quite good. The comment about it being 80-90% of the original is accurate. I wish there was an original color version! Some photos, sorry most of it is using my phone camera. Reveal hidden contents MC Model Snow White Reveal hidden contents Left - MC Model Right - Bandai (Sorry it came out blurry) Reveal hidden contents MC Model neck joint Bandai neck joint Expand @sumyumgoy Where did you snag the MC version. Can't afford the original but would probably get this version. Quote
sumyumgoy Posted November 8, 2021 Posted November 8, 2021 On 11/8/2021 at 3:22 AM, Alphahorizon said: @sumyumgoy Where did you snag the MC version. Can't afford the original but would probably get this version. Expand hey man, I got it from Aliexpress. There are two sellers that I can see. I purchased mine from this one: https://www.aliexpress.com/item/1005003237182471.html?spm=a2g0o.productlist.0.0.5ffe241eq7CoOg&algo_pvid=f8642adc-eda4-44cd-8634-2226fd9da6e8&algo_exp_id=f8642adc-eda4-44cd-8634-2226fd9da6e8-0&pdp_ext_f={"sku_id"%3A"12000024790760131"} The other one is (Seller has better feedback score): https://www.aliexpress.com/item/1005003123340164.html?spm=a2g0o.productlist.0.0.5ffe241eq7CoOg&algo_pvid=f8642adc-eda4-44cd-8634-2226fd9da6e8&algo_exp_id=f8642adc-eda4-44cd-8634-2226fd9da6e8-1&pdp_ext_f={"sku_id"%3A"12000024220818906"} On 11/7/2021 at 5:51 AM, Draft said: Glad you like it. About the copy of original color ver., it was released prior to SW prelude about half a year(or more) by the company called Pegasus (飞马). Some said it is MC, some said it is new company. But from what I've heard, the quality ain't as good as the SW prelude. Here's the link to order in Thailand. https://shopee.co.th/-Pegasus(-飞马)-Metal-Build-1-100-XXXG-00W0-WING-ZERO-EW-i.315508385.8419615721 Don't know if they'll ship abroad or not. Expand Thank you! I will check it out. Quote
Alphahorizon Posted November 8, 2021 Posted November 8, 2021 On 11/8/2021 at 4:09 AM, sumyumgoy said: hey man, I got it from Aliexpress. There are two sellers that I can see. I purchased mine from this one: https://www.aliexpress.com/item/1005003237182471.html?spm=a2g0o.productlist.0.0.5ffe241eq7CoOg&algo_pvid=f8642adc-eda4-44cd-8634-2226fd9da6e8&algo_exp_id=f8642adc-eda4-44cd-8634-2226fd9da6e8-0&pdp_ext_f={"sku_id"%3A"12000024790760131"} The other one is (Seller has better feedback score): https://www.aliexpress.com/item/1005003123340164.html?spm=a2g0o.productlist.0.0.5ffe241eq7CoOg&algo_pvid=f8642adc-eda4-44cd-8634-2226fd9da6e8&algo_exp_id=f8642adc-eda4-44cd-8634-2226fd9da6e8-1&pdp_ext_f={"sku_id"%3A"12000024220818906"} Thank you! I will check it out. Expand Much appreciated @sumyumgoy!! Quote
Alphahorizon Posted November 8, 2021 Posted November 8, 2021 Anyone have this on pre-order and or knowledge of the company? Not Gundamit, as it is another ShowZ site, but the manufacturers. https://gundamit.com/pre-order-navigator-toys-pre-painted-pre-assembled-bandai-asw-g-08-gundam-barbatos-4th-form_p0141.html Quote
eggy99 Posted November 11, 2021 Posted November 11, 2021 Some VERY interesting MOSHOW news coming 1PM JST today. I cannot share anything else until embargo lifts at 1PM JST. Quote
no3Ljm Posted November 12, 2021 Posted November 12, 2021 On 11/11/2021 at 10:56 PM, eggy99 said: Some VERY interesting MOSHOW news coming 1PM JST today. I cannot share anything else until embargo lifts at 1PM JST. Expand Any hint? Is it Gundam-centric or totally different? Also, not sure why it cannot be shared? hehehe. Quote
Numbninja Posted November 12, 2021 Posted November 12, 2021 On 11/11/2021 at 10:56 PM, eggy99 said: Some VERY interesting MOSHOW news coming 1PM JST today. I cannot share anything else until embargo lifts at 1PM JST. Expand I really dig the quality and designs of there mechs...so i'm all in Quote
Alphahorizon Posted November 12, 2021 Posted November 12, 2021 (edited) On 11/12/2021 at 1:28 AM, Numbninja said: I really dig the quality and designs of there mechs...so I'm all in Expand If it is MoShow and not the knock off version McShow. I have the original 1/72 Strike with Sword and Blaster additions. Damn solid figure. I was tempted to sell it in news if the others release, but VERY happy I didn't. After reading the reviews in ShowZ, that manufacturer seems like they were riding off the name of MoShow. Quit deceptively I would say. Edited November 12, 2021 by Alphahorizon Quote
HayateAltoHunter Posted November 12, 2021 Posted November 12, 2021 On 11/11/2021 at 10:56 PM, eggy99 said: Some VERY interesting MOSHOW news coming 1PM JST today. I cannot share anything else until embargo lifts at 1PM JST. Expand Can you share? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.