rdrunner Posted May 10, 2019 Posted May 10, 2019 3 hours ago, borgified said: Stealth VF-1J with the regular SSP sans missiles. The regular SSP goes quite well with the stealth colour scheme actually. Quote
nightmareB4macross Posted May 10, 2019 Posted May 10, 2019 11 hours ago, rdrunner said: The regular SSP goes quite well with the stealth colour scheme actually. Looking good. Yamato should have not only done a matching set of SSPs, but a black GBP to match. Quote
Ignacio Ocamica Posted May 10, 2019 Posted May 10, 2019 I've kept these two (have sold most of my old 1/48). Quote
Kicker773 Posted May 10, 2019 Posted May 10, 2019 Haven’t counted or dusted them yet in a while. It usually take 2-3 days of cleaning. Taking them out and putting them back in the glass cases. For sure since I haven’t really sold any 1/48, still above the 120 mark, not sure if I cracked the 150 barrier. For sure 35-40% have matching SSP or GBP amors. I’ve lost count of those since a few of them are still unopened and I have a few containers with lose SSP that I acquired a while back. Got rid of some of the empty boxes. There was no point since I won’t be selling them anyway. I had a goal to at least get them laid out all in valk modes with either SSP in the living room floor which will take the whole living room floor space. The opened ones at least, still debating on letting the ones in new boxes breath (they won’t be mib if I take them out lol). Not only is it a matter of time consumption to get all the opened 1/48 out, but getting the wife to ban her and the kids from the living for 2/3 days is a no no, so laying them all out is still a reach. I had reached out to an Australian company to see if they could build/print me a 1/48 air craft carrier deck (same company that produces the 1/48 decks sheet on eBay), but they said it would be too expensive. I suggested doing it in sections but I never got a reply back. I was gonna check with Miriya on the boards since he had printed me out stuff before if it’s doable. If anyone can print me or get me a quote for 1/48 mock up carrier deck print out that would be awesome. But for now Marvel has been taking up much of my time. I know this weekend it definitely will be. My DC has been collecting dust but as soon as I get a new body for Bane then I’ll shift attention there again. Finding time now is hard, family/kids, biking, macross, Marvel, dc, freaking backyard work. Ughh.... Quote
nightmareB4macross Posted May 10, 2019 Posted May 10, 2019 Why not take a custom file to a banner print shop and have them print the file for you on vinyl or fabric? Quote
Kicker773 Posted May 10, 2019 Posted May 10, 2019 Haven’t done that before and gotta find time. Figured maybe having it already done and leg work done would be easier. Not too familiar with banner print shops. I’m sure you have experience with that in the cake industry? Quote
Kicker773 Posted May 10, 2019 Posted May 10, 2019 (edited) Plus do banner shops have experience with proper 1/48 scaling? Don’t want it coming out off scale after paying for it. Edited May 10, 2019 by Kicker773 Quote
nightmareB4macross Posted May 10, 2019 Posted May 10, 2019 You can go to a dedicated print shop and either supply the artwork or work with their staff to design it. Of course working with a dedicated artist will cost more but you could probably be able to print the whole Prometheus top deck. In the summertime you could even have it double as the coolest slip-n-slide. Just wet down the topside. Quote
Slave IV Posted May 11, 2019 Posted May 11, 2019 That’s a great three to have @Bing! I still love the Yamato 1/48s too! I know the 1/60 V2s are better and I love those too but the size, gimmicks and simplicity of the 1/48s is still very desireable to me. Also love the low vis and stealth decos you can’t get anywhere else. Quote
nightmareB4macross Posted May 11, 2019 Posted May 11, 2019 1 hour ago, Bing said: Only have 3 and still love them....... I never realized how good the chrome stand would look against a black background and white with blue accent Valkyrie. Excellent set!! Quote
borgified Posted May 11, 2019 Posted May 11, 2019 On 5/10/2019 at 7:43 AM, nightmareB4macross said: Looking good. Yamato should have not only done a matching set of SSPs, but a black GBP to match. They should of since the GBP is well known. Thanks to a scene where Hikaru ejects the complete suit in space after missing Minmay's live in action for the Miss Macross contest. Quote
nightmareB4macross Posted May 11, 2019 Posted May 11, 2019 4 minutes ago, borgified said: They should of since the GBP is well known. Thanks to a scene where Hikaru ejects the complete suit in space after missing Minmay's live in action for the Miss Macross contest. Now that you mention it. A black GBP would have been canon as it did appear in the series. Quote
borgified Posted May 11, 2019 Posted May 11, 2019 2 hours ago, nightmareB4macross said: Now that you mention it. A black GBP would have been canon as it did appear in the series. Does anyone know where and when the Black GBP was shown either in SDFM/DYRL or in the other series? Quote
Slave IV Posted May 11, 2019 Posted May 11, 2019 1 hour ago, borgified said: Does anyone know where and when the Black GBP was shown either in SDFM/DYRL or in the other series? It's been posted here befpre but I can't find it atm...I think it is from SDFM and it is a scene showing a VF-1A in GBP along with some Destroids defending the SDF-1. Quote
Bolt Posted May 11, 2019 Posted May 11, 2019 I’m very curious about that too.. Here’s my stealth 1A, took it off the book shelf to photo it. This baby needs a good cleaning and a custom treatment! Quote
Slave IV Posted May 11, 2019 Posted May 11, 2019 Well, either the search here sucks or I suck at it. Anyways, I can't find the screenshot but I did find this pic of a prototype HMR based on it: Quote
tekering Posted May 12, 2019 Posted May 12, 2019 3 hours ago, borgified said: Does anyone know where and when the Black GBP was shown either in SDFM/DYRL or in the other series? It's at the climax of SDFM episode 27, but I don't know if it's considered canon or not... ...since its markings read "Itano the Pervert." Quote
Bolt Posted May 12, 2019 Posted May 12, 2019 (edited) Oh right. Wasn’t that the scene where all the animators were giving a shout out to each other? Slightly different angle.. Edited May 12, 2019 by Bolt Quote
borgified Posted May 12, 2019 Posted May 12, 2019 2 hours ago, Slave IV said: Well, either the search here sucks or I suck at it. Anyways, I can't find the screenshot but I did find this pic of a prototype HMR based on it: 2 hours ago, Bolt said: I would snatch multiple copies of that! As would everyone else that loves the VF-1J with the GBP! Quote
tekering Posted May 12, 2019 Posted May 12, 2019 3 hours ago, Bolt said: Wasn’t that the scene where all the animators were giving a shout out to each other? Well, Hideaki Anno, at least... But I don't consider it canon, any more than the soda pop and beer can missiles in DYRL. Quote
nightmareB4macross Posted May 12, 2019 Posted May 12, 2019 35 minutes ago, tekering said: Well, Hideaki Anno, at least... But I don't consider it canon, any more than the soda pop and beer can missiles in DYRL. But, soda and beer are very real. ;P Quote
Bolt Posted May 12, 2019 Posted May 12, 2019 56 minutes ago, tekering said: Well, Hideaki Anno, at least... But I don't consider it canon, any more than the soda pop and beer can missiles in DYRL. Love that part 21 minutes ago, nightmareB4macross said: But, soda and beer are very real. ;P Haha! Ya, but not canon Quote
rdrunner Posted May 24, 2019 Posted May 24, 2019 7 hours ago, tekering said: Finally got all my 1:48 birds on one shelf. Great 1/48 collection! Quote
nightmareB4macross Posted June 20, 2019 Posted June 20, 2019 Nice set of pictures That is great management of forced perspective using the HMR VE-1. Quote
Bolt Posted June 20, 2019 Posted June 20, 2019 Looks awesome! I’m starting to see a comic book here.. Quote
vlenhoff Posted June 20, 2019 Posted June 20, 2019 On 5/24/2019 at 10:05 AM, tekering said: Finally got all my 1:48 birds on one shelf. Most impressive! Quote
vlenhoff Posted June 20, 2019 Posted June 20, 2019 On 5/10/2019 at 10:15 AM, Ignacio Ocamica said: I've kept these two (have sold most of my old 1/48). nice! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.