Gabe Q Posted August 12, 2016 Share Posted August 12, 2016 Instead of masking tape, you can use something like Bare Metal Foil, which lays down pretty well on curved surfaces with a little patience. Cover the whole canopy with a piece of foil, the cut the separations with a sharp pointed hobby knife. I used this first on the canopy of my Falcon, and have done it successfully with aircraft canopies since then. Does it matter which type of Bare Metal Foil you use? I see they have aluminum, copper, ultra bright chrome etc... I mean, are they of varying thicknesses or anything? Quote Link to comment Share on other sites More sharing options...
slide Posted August 12, 2016 Share Posted August 12, 2016 Does it matter which type of Bare Metal Foil you use? I see they have aluminum, copper, ultra bright chrome etc... I mean, are they of varying thicknesses or anything? I think they're all fairly uniform Quote Link to comment Share on other sites More sharing options...
NZEOD Posted August 12, 2016 Share Posted August 12, 2016 CoXjxjaVIAAe-JY.jpg bandai's twitter...https://twitter.com/HobbySite/status/758262866365394945 Aww man i thk these are exclusives to some live event? Can anyone clear that up? Are they available for non - Jp folks thru some pre-orders somehow? http://page13.auctions.yahoo.co.jp/jp/auction/r159662155 Quote Link to comment Share on other sites More sharing options...
kajnrig Posted August 13, 2016 Share Posted August 13, 2016 (edited) *whimpering sounds* You... You wouldn't happen to have advice on proxy bidding, would you? EDIT: Well, took a dive and set up an account with From Japan. Hopefully this goes well. Edited August 13, 2016 by kajnrig Quote Link to comment Share on other sites More sharing options...
seti88 Posted August 13, 2016 Share Posted August 13, 2016 http://page13.auctions.yahoo.co.jp/jp/auction/r159662155 Thanks NZEOD! Now the walkure are flying on the back of their steeds so to speak heheh... 02 aesthetics looks the best out of em as usual... Let the games begin... Quote Link to comment Share on other sites More sharing options...
NZEOD Posted August 13, 2016 Share Posted August 13, 2016 *whimpering sounds* You... You wouldn't happen to have advice on proxy bidding, would you? EDIT: Well, took a dive and set up an account with From Japan. Hopefully this goes well. I use Buyee.jp and haven't had any issues yet Quote Link to comment Share on other sites More sharing options...
kajnrig Posted August 13, 2016 Share Posted August 13, 2016 Thanks so much for the head's-up. So it seems these WERE an event exclusive. And they're using stickers and not decals, at least from the pics, which is unfortunate. But super cool either way. Quote Link to comment Share on other sites More sharing options...
mickyg Posted August 23, 2016 Share Posted August 23, 2016 Just got my Chuck special (VF-31E) in. For a kit that doesn't include any markings for the bottom, Bandai actually went out of their way to accurately (as far as I can tell) portray the folding dish. Not sure I fully understand it yet, but I think this should look fine on the DX. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 25, 2016 Share Posted August 25, 2016 Sv-262Ba Draken III (Bogue's Unit) Photo courtesy of TagHobby. Quote Link to comment Share on other sites More sharing options...
mickyg Posted August 25, 2016 Share Posted August 25, 2016 Yay! Quote Link to comment Share on other sites More sharing options...
ivorysniper Posted August 28, 2016 Share Posted August 28, 2016 (edited) Sv-262Ba Draken III (Bogue's Unit) Photo courtesy of TagHobby. Any word so far about its release date ? Edited August 28, 2016 by ivorysniper Quote Link to comment Share on other sites More sharing options...
Mazinger Posted August 28, 2016 Share Posted August 28, 2016 I like that color scheme. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 28, 2016 Share Posted August 28, 2016 Any word so far about its release date ? Based on the link that I provided it says November 2016. Quote Link to comment Share on other sites More sharing options...
mickyg Posted August 29, 2016 Share Posted August 29, 2016 Built a few of these already but this is the first I've out any effort into painting. It's crude, even by my standards but I'm still impressed with what you can achieve with a bit of paint and forethought into how you segment (and cut) the stickers before placing them. The blue green was very hard to get right and the pics make it look much too green (still). The purple grey was a touch easier, with a mix of gunship Gray and violet. Why Bandai gives you one colour for one model and another for a different one is beyond me. The 31S needs the back plate to be purple Gray and the legs to be metallic, along with the spine. The 31J is molded in purple Gray already but has the legs this colour too, and they should be painted metallic instead - what the 31s is already out of the box. They're 5 dollar kits though and darn good for the price. Quote Link to comment Share on other sites More sharing options...
IXTL Posted August 29, 2016 Author Share Posted August 29, 2016 https://twitter.com/zellbine/status/769393629622304768 Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted August 29, 2016 Share Posted August 29, 2016 Why do I feel like these kits have better proportions than the 1/72 ones? The transforming kit of the 31 feels like the nose is sitting too high, but this one looks like it just has a better profile. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted September 12, 2016 Share Posted September 12, 2016 ITASHA! Bandai Online Shop Limited Clear Set at Y3300. Nov 2016 release. PO on Sept 12. Photos courtesy of TagHobby. Quote Link to comment Share on other sites More sharing options...
kajnrig Posted September 12, 2016 Share Posted September 12, 2016 Bloody hell. Just received mine from From Japan that ended up costing me somewhere around $80 total... Quote Link to comment Share on other sites More sharing options...
ayaxr Posted September 12, 2016 Share Posted September 12, 2016 Are those stickers only or does it come with waterslides? Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted September 12, 2016 Share Posted September 12, 2016 Are those stickers only or does it come with waterslides? Probably sticker. There's no indication on the japanese wordings that have the word water though. All it says is Marking Seal. Quote Link to comment Share on other sites More sharing options...
kajnrig Posted September 13, 2016 Share Posted September 13, 2016 Confirmed stickers only. Will post pictures as proof in a bit. Quote Link to comment Share on other sites More sharing options...
00Geass Posted September 15, 2016 Share Posted September 15, 2016 Why do I feel like these kits have better proportions than the 1/72 ones? The transforming kit of the 31 feels like the nose is sitting too high, but this one looks like it just has a better profile. Because these don't have more than 50 parts and don't need to transform 3 ways Quote Link to comment Share on other sites More sharing options...
IXTL Posted September 21, 2016 Author Share Posted September 21, 2016 http://masterfileblog.jp/review/2016/09/21/6770.html Quote Link to comment Share on other sites More sharing options...
slide Posted September 21, 2016 Share Posted September 21, 2016 http://masterfileblog.jp/review/2016/09/21/6770.html I like it! the more I see it the more I want one... or maybe a few to do as different ships of the class Quote Link to comment Share on other sites More sharing options...
mickyg Posted September 21, 2016 Share Posted September 21, 2016 I'm already wondering how easy it'll be to slice the decks on the carriers and angle them, so it actually looks like the cruiser mode we see in the show. It's cool (even very cool) but annoying it's not shown the way it always looks on the show. Quote Link to comment Share on other sites More sharing options...
trojan_gambit Posted September 22, 2016 Share Posted September 22, 2016 http://masterfileblog.jp/review/2016/09/21/6770.html Like it. I hope they release other Macross class too. Depending on the parts separation, I hope it's easy to customize it to Storm Attacker mode. Quote Link to comment Share on other sites More sharing options...
Kelsain Posted September 22, 2016 Share Posted September 22, 2016 (edited) It's a shame that it's only 10ish cm long. If it were 20, it'd fit in nicely with the Hasegawa SDF-1. As it were, it they made a Quarter for this collection, that would be about the right scale - easy to convert to attacker, too. Edited September 22, 2016 by Kelsain Quote Link to comment Share on other sites More sharing options...
IXTL Posted September 23, 2016 Author Share Posted September 23, 2016 https://www.facebook.com/loopaza/photos/pcb.1219146044813575/1219145914813588/?type=3&theater Quote Link to comment Share on other sites More sharing options...
IXTL Posted September 24, 2016 Author Share Posted September 24, 2016 http://ameblo.jp/digitamin/image-12203066399-13756179649.html Quote Link to comment Share on other sites More sharing options...
IXTL Posted September 24, 2016 Author Share Posted September 24, 2016 https://twitter.com/zellbine/status/779645315355844608 Quote Link to comment Share on other sites More sharing options...
MechTech Posted September 24, 2016 Share Posted September 24, 2016 Thanks for posting the photos! Some real cool looking stuff coming out! - MT Quote Link to comment Share on other sites More sharing options...
areaseven Posted September 25, 2016 Share Posted September 25, 2016 Quote Link to comment Share on other sites More sharing options...
mickyg Posted September 25, 2016 Share Posted September 25, 2016 (edited) So that's all the markings included, eh? I'd also hope there would be a bit more in the way of different coloured sprues too. Oh well. 5 bucks, after all. Edited September 25, 2016 by mickyg Quote Link to comment Share on other sites More sharing options...
kajnrig Posted September 25, 2016 Share Posted September 25, 2016 "I'll post pics," he says, then proceeds to wait a week or two. Anyway, here are some poor phone camera pics of the P-Bandai exclusive itasha (unassembled) kits. The cut lines on the sticker sheets might not show due to resizing, but they're definitely stickers and not waterslide decals. Clear Yellow = VF-31E, Reina Clear Blue = VF-31J, Freyja Clear Green = VF-31S, Mikumo Clear Red = VF-31C, Makina Clear Black = VF-31F, Kaname All come with a colorless clear B runner (upper fuselage, doesn't show well in pictures). Box, runners: Construction pamphlet: Sticker sheet: Quote Link to comment Share on other sites More sharing options...
derex3592 Posted September 25, 2016 Share Posted September 25, 2016 I think that's pretty sweet for $5. Might have to pick one up eventually. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.