Jump to content

Recommended Posts

Posted
4 hours ago, spacemanoeuvres said:

I just watched jenius’ review and see that the clips are for the forward swept wings :/

Maybe someone will put something on shapeways. 

I have a vague memory of someone attaching the lil drakkens to the missile holes under the wing. If so maybe the kairos could do the same

Posted
28 minutes ago, RealJayDee said:

I have a vague memory of someone attaching the lil drakkens to the missile holes under the wing. If so maybe the kairos could do the same

The lil drakkens plug into the hard points on all of the Bandai valks..  But if they want the 31A to be configured like the other 31's with the Lil drakken on the outside of the wing someone will need to make a special custom clip.

Posted (edited)
6 hours ago, RealJayDee said:

I have a vague memory of someone attaching the lil drakkens to the missile holes under the wing. If so maybe the kairos could do the same

Yes. Like Mommar pointed out, it really clipped to the missile hard points. However, the clip that came with the VF-31F's or the LilDraken's set is based on the wing shape. Someone needs to make a custom clip first based on the VF-31A's delta wing shape.

Bandai-VF-31A-DX-5.jpg

Photo from Jenius' Anymoon website.

 

Edited by no3Ljm
Posted
6 minutes ago, no3Ljm said:

Yes. Like Mommar pointed out, it really clipped to the missile hard points. However, the clip that came with the VF-31F's or the LilDraken's set is based on the wing shape. Someone needs to make a custom clip first based on the VF-31A's delta wing shape.

Or come up with a better solution because that clip is honestly a POS.

Posted
29 minutes ago, Mommar said:

Or come up with a better solution because that clip is honestly a POS.

Or just don't put it at all. :lol:

Lil Drakens were designed in the first place for the Drakens and not for the Siegfrieds. :spiteful:

 

Posted
2 hours ago, no3Ljm said:

Or just don't put it at all. :lol:

Lil Drakens were designed in the first place for the Drakens and not for the Siegfrieds. :spiteful:

 

Customization knows no bounds.

Posted

Since those lil draken clips enable a hardpoint on the wings, theoretically anything can be put on the wing tips...the lil drakens are a "lil" too large for the 31 IMO.

Hmm, would any armaments from the DX 19 look nice clipped on to the wing tips?

Posted (edited)

17A77CDF-3444-4C79-AEAE-2844E27E5B0D.thumb.jpeg.e0796db3cfe2432f77ede2719fb2238a.jpeg

Not mine. I think the DX YF-19 has similar missiles. I never opened mine haha

Edited by spacemanoeuvres
wrods
Posted
31 minutes ago, Lolicon said:

Did anyone ever make a Shapeways DX hardpoint for all those extra missiles from the YF-19 set? Be nice to use all those extras on other valks.

I had planned to, but my work laptop got taken for other uses, so I don't have any CAD software available at home anymore.

Posted
2 hours ago, spacemanoeuvres said:

17A77CDF-3444-4C79-AEAE-2844E27E5B0D.thumb.jpeg.e0796db3cfe2432f77ede2719fb2238a.jpeg

Not mine. I think the DX YF-19 has similar missiles. I never opened mine haha

I don’t recall anything being made for a central pylon.

Posted (edited)

Those ones are by someone else, but Xigfrid has similar missiles in his shapeways shop.  Personally, I've got my 31A loaded with all the longer dual-packs of sparrow/amraam looking missiles from the YF-19 set.  They look beautiful on it. :) 

The belly pod though looks like one of the ones that came with the Yamato/Arcadia VF-0s.

Edited by Chronocidal
Posted
4 hours ago, Saviant said:

Would like to know where those missiles come from as they look sweet on the 31A

That person made all of those ordinance. Makes a lot of minor yet cool modifications. Love the VF-25ES.

Posted

Not mine, I confirm.

Hey, that’s the first time I see a physical model of the larger central container outside of the Master file, although I was thinking it was larger. 

Btw, I need something to store and hide the pods and ordnance, I got too many I think  

 

E2D5C39F-B3EB-4F29-8E9E-AD44C772B180.jpeg

Posted (edited)
11 minutes ago, Alex GS said:

Definitely loving the color:

 

From Supreme Mecha FB

image.png.3eade935a6e23e2ade6510be9eee6b19.png

image.png.629b9e7c9772922dd910e17d57dec0f1.png

image.png.e8fc1c9056bf9fc5c21022e9825b93a4.png

I wish they had a pic of the randome folded up.  I agree the color is awesome!

Edited by Rogueload
Posted (edited)
25 minutes ago, Rogueload said:

I wish they had a pic of the randome folded up.  I agree the color is awesome!

Last image, top-left picture. You can see a bit of it poking out below the legs.

Edited by Sanity is Optional
Posted
1 hour ago, Alex GS said:

From Supreme Mecha FB

image.png.3eade935a6e23e2ade6510be9eee6b19.png

Funny, that I was trying to find last night the top right VF-31E pose where it was shown in Episode 6 wearing its Super Pack. And ask everyone if they will going to pose it like that until the actual VF-31E Super Pack gets available. ^_^

And then I did something else so I forgot that I was looking for it. :lol: 

 

Posted (edited)
1 hour ago, Shizuka the Cat said:

I am assuming this article mentioning of the RVF-26 being among those with a radome is a typo?

I think that your right.

The valks that had randome are: VE-1, RVF-25 + RVF-171 (both Luca's units) and Chuck's VF-31E.

VF-11C Super Thunderbolt should be in the list as well as it includes the randome as well -  http://www.macross2.net/m3/macross7/vf-11c-radome.htm

Note: I think the Master List of Macross Mecha needs to be updated to include the Delta valks.

Edited by borgified
Posted (edited)
9 hours ago, no3Ljm said:

Funny, that I was trying to find last night the top right VF-31E pose where it was shown in Episode 6 wearing its Super Pack. And ask everyone if they will going to pose it like that until the actual VF-31E Super Pack gets available. ^_^

And then I did something else so I forgot that I was looking for it. :lol: 

 

That top right 31E pose looks as if it was halfway through a VF-1J DX transformation and with detached legs!

Yeah that was an iconic chuck pose, with arm cannons blazing, wasn't it? Basically the only weapons he had at his disposal....
 

1. Just realised so its 23760k yen with radome and no gun?

2. Hmm assume that the radome is detachable, and it would be able to be mounted on any other 31 fighter...am thinking 31A/E version?!

Then we can have a 31E/A version too!

 

Edited by seti88
Posted
12 minutes ago, seti88 said:

2. Hmm assume that the radome is detachable, and it would be able to be mounted on any other 31 fighter...am thinking 31A/E version?!

 Then we can have a 31E/A version too!

I might buy 2 just to have a spare radome pod to re-paint...

Posted
12 minutes ago, seti88 said:

Then we can have a 31E/A version too!

 

That would be sweet!

 But not sure it is detachable..

Posted
Just now, Bolt said:

That would be sweet!

 But not sure it is detachable..

The pod is fully detachable, just like every other VF-31. It's a unique pod though, no drone charger or gun, just the radar dish.

Posted

So based on the photos, I noticed that the Radome when folded is not flushed to the legs. It protrudes a little bit unless you use the landing gears.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...