Lolicon Posted November 14, 2015 Share Posted November 14, 2015 Transformed my 0A. No broken legs... yet. Haven't tried pulling the legs out. Right elbow is pretty loose though. Can't hold up the gunpod. Lame. Why would you paint the surfaces of the wings that will scrape together when tucked away in battroid? Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 14, 2015 Share Posted November 14, 2015 Talking abt the 0a colors, I thk its a unique color, I thk only the vf4 comes near ....and with its shape, looks like a truly navy spec bird! Quote Link to comment Share on other sites More sharing options...
jenius Posted November 14, 2015 Share Posted November 14, 2015 I was thrilled to find out what I thought was some paint worn off on the nosecone of my 0A was actually just a smudge of something that rubbed off when I was transforming the toy. So, if you think you have scratched paint, you probably do, but if it looks that way out of the box you might want to lightly rub your thumb against it and make sure it isn't just a bit of dirt or something. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted November 14, 2015 Share Posted November 14, 2015 Talking abt the 0a colors, I thk its a unique color, I thk only the vf4 comes near ....and with its shape, looks like a truly navy spec bird! ^ This. It's mid-november now. 1.5 months to go. Getting excited for the VF-2SS. Opsss... wrong thread. Hahaha! Quote Link to comment Share on other sites More sharing options...
arbit Posted November 14, 2015 Share Posted November 14, 2015 For example, a pin vise is useful for drilling out broken tabs so that you can replace them with stronger bits. I learned that from a few of the modeling guys, and I was able to succeed in completing a similar repair to my MP Ultra Magnus some months back. The thigh looks and works great now. Could you explain further how you strengthen broken tabs or provide a link? Thanks. Quote Link to comment Share on other sites More sharing options...
technoblue Posted November 14, 2015 Share Posted November 14, 2015 (edited) Could you explain further how you strengthen broken tabs or provide a link? Thanks. Again, drill and pin. But you need a pin vise, some good adhesive and some drill bits that will allow you to work with the plastic that needs fixing. Also, you will need a pin or a paper clip or some other piece of thin metal that you can fashion as a support to hold the plastic together. The pin that you create replaces the plastic tab and should make for a stronger connection. Here's the first link that I found with a simple Google search (see method #2): http://figurefixer.blogspot.com/2012/08/generic-action-figure-repairs-two.html If you also search the Macross World forums for pin vise, which is a hobby tool, you will find plenty of modelers using this technique in their builds: https://www.google.com/search?q=pin+vise+site%3A+http%3A%2F%2Fwww.macrossworld.com%2Fmwf%2F&oq=pin+vise+site%3A+http%3A%2F%2Fwww.macrossworld.com%2Fmwf%2F&aqs=chrome..69i57.20727j0j8&sourceid=chrome&es_sm=93&ie=UTF-8#q=%22pin+vise%22+site:http:%2F%2Fwww.macrossworld.com%2Fmwf%2F Hope that helps! Edit: Changed the second link to a google search link, but you can get similar results if you use the advanced forum search to look for posts with the term pin vise. Edited November 15, 2015 by technoblue Quote Link to comment Share on other sites More sharing options...
Scyla Posted November 14, 2015 Share Posted November 14, 2015 I was thrilled to find out what I thought was some paint worn off on the nosecone of my 0A was actually just a smudge of something that rubbed off when I was transforming the toy. So, if you think you have scratched paint, you probably do, but if it looks that way out of the box you might want to lightly rub your thumb against it and make sure it isn't just a bit of dirt or something. Sadly I can see the darker gray plastic underneath the paint rub. Quote Link to comment Share on other sites More sharing options...
Universe1010 Posted November 15, 2015 Share Posted November 15, 2015 Unfortunate but now this has got me really thinking if I still want the VF-0S if the leg falls off right away out of the box Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted November 16, 2015 Share Posted November 16, 2015 (edited) Wow. Looks like I'm cancelling me 0S. I'm glad I skipped the 0A due to spending money on other stuff. I never transformed my 0D so I'm not too sure the status there. Has anybody sent this to Mr. K? Edited November 16, 2015 by Gakken85 Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 That gerwalk review turned hilarious with that unattached leg although i know it was not meant to be hilarious...no offense.... The reason the leg tab to the underside of the plane doesnt stay too well is because the other leg was unattached. Once both legs were attached to the metal swing bar, they fitted in nice and tight in gerwalk mode. Thanks for the honest review though...I was put off as well when the leg fell off, but after i got it fixed, really enjoyed the valk with its new proportions and handling. Quote Link to comment Share on other sites More sharing options...
SuperHobo Posted November 16, 2015 Share Posted November 16, 2015 (edited) Whelp. I've had mine for all, but a day and the hip popped right off. Yesterday I tried the pull out hip function and it worked fine. Today I went to pose the VF-0A for a photoshoot by moving the hip outwards and the hip joint popped right off. This is the 3rd and last Arcadia valkyrie I'm buying. Each Arcadia valkyrie I own has some sort of problem and this is the final straw. frakk their valkyries this is garbage. I've tweeted at Mr.K this photo. Edited November 16, 2015 by SuperHobo Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 Whelp. I've had mine for all, but a day and the hip popped right off. Yesterday I tried the pull out hip function and it worked fine. Today I went to pose the VF-0A for a photoshoot by moving the hip outwards and the hip joint popped right off. This is the 3rd and last Arcadia valkyrie I'm buying. Each Arcadia valkyrie I own has some sort of problem and this is the final straw. frakk their valkyries this is garbage. I've tweeted at Mr.K this photo. Similar to mine and jenius it seems to be the left leg..tho with yeti's i thk it was the right.. Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted November 16, 2015 Share Posted November 16, 2015 Whelp. I've had mine for all, but a day and the hip popped right off. Yesterday I tried the pull out hip function and it worked fine. Today I went to pose the VF-0A for a photoshoot by moving the hip outwards and the hip joint popped right off. This is the 3rd and last Arcadia valkyrie I'm buying. Each Arcadia valkyrie I own has some sort of problem and this is the final straw. frakk their valkyries this is garbage. I've tweeted at Mr.K this photo. that sucks i hope you're able to save him with a good repair. damn, freakin arcadia... Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 They should have made the hip ball/socket joint bigger to be able to handle the stress of pulling on the legs... Quote Link to comment Share on other sites More sharing options...
SuperHobo Posted November 16, 2015 Share Posted November 16, 2015 I don't care how good the VF-0S comes out if it still has the same hip design there will be plenty waiting to explode. I always wanted the reactive armor for the VF-0S, but now I'm done forget it. Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 I don't care how good the VF-0S comes out if it still has the same hip design there will be plenty waiting to explode. I always wanted the reactive armor for the VF-0S, but now I'm done forget it. That thought has been running through my mind for the longest while as well... Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted November 16, 2015 Share Posted November 16, 2015 Mine was the right leg. Quote Link to comment Share on other sites More sharing options...
Hey-Pi-Ron Posted November 16, 2015 Share Posted November 16, 2015 (edited) I hope, if all you guys send this photos and video to Mr.K, ARCADIA fix this issue for VF-0S. Anyway, Isn't this is same mechanism as VF-1? Why this have half-ball instead of full metal balljoint like FV-1 have? I didn't understand something? Edited November 16, 2015 by Hey-Pi-Ron Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 I hope, if all you guys send this photos and video to Mr.K, ARCADIA fix this issue for VF-0S. Anyway, Isn't this is same mechanism as VF-1? Why this have half-ball instead of full metal balljoint like FV-1 have? I didn't understand something? My conclusion is they should have made the ball larger to handle the stress of puling on the legs. Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted November 16, 2015 Share Posted November 16, 2015 They should have tested it enough to know it was a piece of crap. haha Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 (edited) They should have tested it enough to know it was a piece of crap. haha Who knows if they did a robust enough test...maybe they used ppl with delicate fingers to transform and it passed!... Edited November 16, 2015 by seti88 Quote Link to comment Share on other sites More sharing options...
jenius Posted November 16, 2015 Share Posted November 16, 2015 (edited) It's a marketing ploy by Arcadia. Next year they're going to release special "Fixed leg editions" to get you to buy the same toy twice since there aren't a lot of repaint options. The good news is that you can keep your broken VF-0 toys for dioramas of destroyed VF-0s when the SV-51 toys hit the market. That gerwalk review turned hilarious with that unattached leg although i know it was not meant to be hilarious...no offense.... The reason the leg tab to the underside of the plane doesnt stay too well is because the other leg was unattached. Once both legs were attached to the metal swing bar, they fitted in nice and tight in gerwalk mode. Thanks for the honest review though...I was put off as well when the leg fell off, but after i got it fixed, really enjoyed the valk with its new proportions and handling. It might be true, but I would say that 1) people with legs still attached have complained about the intakes, and 2) my intakes didn't work before the left fell off. It's possible they're related (like if your intakes don't seat right you should expect a leg to fall off) but it's also possible there's something else wrong. After all, what would the other leg not being pegged in do to cause the other intake to fall out? Edited November 16, 2015 by jenius Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 It's a marketing ploy by Arcadia. Next year they're going to release special "Fixed leg editions" to get you to buy the same toy twice since there aren't a lot of repaint options. The good news is that you can keep your broken VF-0 toys for dioramas of destroyed VF-0s when the SV-51 toys hit the market. SV-51? talk abt more delicateness! Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 It's a marketing ploy by Arcadia. Next year they're going to release special "Fixed leg editions" to get you to buy the same toy twice since there aren't a lot of repaint options. The good news is that you can keep your broken VF-0 toys for dioramas of destroyed VF-0s when the SV-51 toys hit the market. It might be true, but I would say that 1) people with legs still attached have complained about the intakes, and 2) my intakes didn't work before the left fell off. It's possible they're related (like if your intakes don't seat right you should expect a leg to fall off) but it's also possible there's something else wrong. After all, what would the other leg not being pegged in do to cause the other intake to fall out? I think it had something to do with the weight balance as two legs attached to the underside of the valk meant the leg weight on one leg tab was halved, or in other words leg weight was shared when both leg tabs were in. Thats just my observation after i had both of them retabbed in versus when i was struggling with just one leg. Quote Link to comment Share on other sites More sharing options...
SuperHobo Posted November 16, 2015 Share Posted November 16, 2015 It's a marketing ploy by Arcadia. Next year they're going to release special "Fixed leg editions" to get you to buy the same toy twice since there aren't a lot of repaint options. The good news is that you can keep your broken VF-0 toys for dioramas of destroyed VF-0s when the SV-51 toys hit the market. It might be true, but I would say that 1) people with legs still attached have complained about the intakes, and 2) my intakes didn't work before the left fell off. It's possible they're related (like if your intakes don't seat right you should expect a leg to fall off) but it's also possible there's something else wrong. After all, what would the other leg not being pegged in do to cause the other intake to fall out? So what are we going to do with the new SV-51s that break at the neck? Have our legless VF-0s shoot the head off? Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted November 16, 2015 Share Posted November 16, 2015 (edited) When people are talking about the intakes not staying attached, is it the connection between the intake and the metal plate above them? For all the improvements over the first version, that entire assembly hasn't changed a bit, and it was always a problem. That attachment point just has absolutely no strength to hold the intakes stable. Edited November 16, 2015 by Chronocidal Quote Link to comment Share on other sites More sharing options...
Universe1010 Posted November 16, 2015 Share Posted November 16, 2015 Cancelled my VF0S preorder. I'm waiting for reviews before I buy it. Sad I was so looking forward to it Quote Link to comment Share on other sites More sharing options...
technoblue Posted November 16, 2015 Share Posted November 16, 2015 This is looking bad for Arcadia. And now I wonder, maybe jenius is right and the new VF-0 Valks are time bombs? This also reminds me that I haven't checked my 0A - just too busy this weekend. Quote Link to comment Share on other sites More sharing options...
seti88 Posted November 16, 2015 Share Posted November 16, 2015 When people are talking about the intakes not staying attached, is it the connection between the intake and the metal plate above them? For all the improvements over the first version, that entire assembly hasn't changed a bit, and it was always a problem. That attachment point just has absolutely no strength to hold the intakes stable. Am not sure if its the same thing but was commenting on the hip intakes connecting to the body via tabs. On mine, the legs stay connected to the body after tabbing them with both legs on in gerwalk mode. Cancelled my VF0S preorder. I'm waiting for reviews before I buy it. Sad I was so looking forward to it Yea its kind of a bummer due to it being the 0s. However, dont thk there is a rush to cancel yet until after some reviews have come out. But knowing arcadia there wouldnt be pre-order madness anyway and you can still hv a chance to resecure it if reviews are positive. Quote Link to comment Share on other sites More sharing options...
Mommar Posted November 16, 2015 Share Posted November 16, 2015 (edited) Tweet as many photos as possible at Mr K and Arcadia. I don't care what Tochiro says about them knowing. They need to know that we know and we aren't letting them get away with it. maybe it will embolden any Japanese owners to start posting photos or their legless 0's as well. On the other hand, there was nobody at Bandai we could tweet all of our exploding 171's to, but then only one of their releases had that particular issue as well. Edited November 16, 2015 by Mommar Quote Link to comment Share on other sites More sharing options...
anubis20 Posted November 16, 2015 Share Posted November 16, 2015 Any more broken leg pics? Quote Link to comment Share on other sites More sharing options...
SuperHobo Posted November 16, 2015 Share Posted November 16, 2015 (edited) So Mr.K tweeted back to me and basically said it was user error on my part? Yeah frakk these guys. Jenius if you don't mind I tweeted Mr.K your video. Edited November 16, 2015 by SuperHobo Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted November 16, 2015 Share Posted November 16, 2015 User error, as in during factory assembly, or is he saying we are ripping the legs off? Quote Link to comment Share on other sites More sharing options...
SuperHobo Posted November 16, 2015 Share Posted November 16, 2015 User error, as in during factory assembly, or is he saying we are ripping the legs off? After calming down, I think he's saying this is just an isolated case, but Anubis20 and I are tweeting at him other pictures and videos of people who have the hip problem. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted November 16, 2015 Share Posted November 16, 2015 Can anyone translate the imgur guide I wrote up? The issue isn't a mystery. I figured it out and fixed it in 30 min. From other peoples descriptions of their sockets, they seem to be telling the same story as me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.