spanner Posted August 2, 2015 Share Posted August 2, 2015 The color is terrible it needs to be off-white. Or is Arcadia doing the anti-flash white? It would be nice if they make the reactive armor to fit on the V1, there is no way I will be getting this bird with those colors. you might get lucky with the odd piece fitting but chances are no they simply wont. The new Zero range is basically completely new with minimal to no carry over components from the original. And regarding the colors, they may be changed for the final release version but as it they are now I rather like them! Quote Link to comment Share on other sites More sharing options...
wm cheng Posted August 2, 2015 Share Posted August 2, 2015 I doubt we'd get more markings... in fact, my Yamato VF-0 didn't even have the UN Kite symbols on it, just a lousy space in the lines with bare plastic showing. Quote Link to comment Share on other sites More sharing options...
Loop Posted August 2, 2015 Share Posted August 2, 2015 I doubt we'd get more markings... in fact, my Yamato VF-0 didn't even have the UN Kite symbols on it, just a lousy space in the lines with bare plastic showing. Yeah Yamato only did that on the VF-0A unknown soldier, but the Roy and the Shin had it tampo'd on. Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted August 2, 2015 Share Posted August 2, 2015 (edited) Actually nope, none of the originals had the nose kites tampo'd on. Was really disappointing actually, because I never use any of the stickers. I had heard it was something about them having issues tampoing across multiple parts early on, but they clearly got past that limitation later on. Edited August 2, 2015 by Chronocidal Quote Link to comment Share on other sites More sharing options...
spanner Posted August 2, 2015 Share Posted August 2, 2015 As much as having optional stickers available is good and depending on the application I don't really mind the use of stickers but Arcadia really needs to move on from their use as it seems the great majority (in this forum anyways) would opt for more tampo even at the cost of not getting any additional included with the Valks.. Quote Link to comment Share on other sites More sharing options...
Kyp Durron Posted August 2, 2015 Share Posted August 2, 2015 I really wish Arcadia would take a lesson from Bandai on tampoing, they could really stand to learn a thing or two. The differences between the YF-19 and VF-19 Advance is painful, to put it mildly. Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 2, 2015 Share Posted August 2, 2015 the 0S will have the same amount of tampo of the vf-0D. which includes the UN Kites. i'm waiting for august to see how the 0A turns out re: tampo markings. almost definitely the same amount as the 0D with the corrected intake markings that won't be crooked (i posted about this for the 0D.) i really like the color of the 0A, light grey which means...no pink hue (that's what i care most about more than shade at this point) i'm just worried the 0S will be pink... that'll drive me crazy. Quote Link to comment Share on other sites More sharing options...
Loop Posted August 2, 2015 Share Posted August 2, 2015 (edited) Actually nope, none of the originals had the nose kites tampo'd on. Was really disappointing actually, because I never use any of the stickers. I had heard it was something about them having issues tampoing across multiple parts early on, but they clearly got past that limitation later on. My bad, it's been so long that I got the blank spot for the modex confused with the kite on the other wing. Here is the link from Anymoon to demonstrate my confusion lol: http://anymoon.com/blog/wp-content/uploads/2007/01/Yamato-VF-0-6.jpg This is what he was really talking about: http://anymoon.com/blog/wp-content/uploads/2007/01/Yamato-VF-0-15.jpg Edited August 2, 2015 by Loop Quote Link to comment Share on other sites More sharing options...
technoblue Posted August 2, 2015 Share Posted August 2, 2015 Thanks for the links, Loop. I wouldn't have known that with just relying on the amiami pics and without reading the replies in this thread. More markings will be an overall improvement in any case... Quote Link to comment Share on other sites More sharing options...
funkymonkeyjavajunky Posted August 2, 2015 Share Posted August 2, 2015 Is there an exact release date for the VF-0A yet? Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 2, 2015 Share Posted August 2, 2015 Is there an exact release date for the VF-0A yet? Usually, towards the end of the month. NY says it's 8/31. It's safe to assume it's the last week of August. So better get your cash ready for the last week of August. Quote Link to comment Share on other sites More sharing options...
IXTL Posted August 4, 2015 Share Posted August 4, 2015 https://twitter.com/Mrk_arcadia/status/628427128745299969/photo/1 Quote Link to comment Share on other sites More sharing options...
spanner Posted August 4, 2015 Share Posted August 4, 2015 Dang! that looks good! Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 4, 2015 Share Posted August 4, 2015 Gorgeous. Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 4, 2015 Share Posted August 4, 2015 when do pre orders begin? Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 4, 2015 Share Posted August 4, 2015 when do pre orders begin? Probably after the 0A initial release. They're just making sure that fans will continue their 0A purchase instead of switching it to 0S. Quote Link to comment Share on other sites More sharing options...
MacrossJunkie Posted August 4, 2015 Share Posted August 4, 2015 https://twitter.com/Mrk_arcadia/status/628427128745299969/photo/1 I really hope it comes with those markings as tampo at minimum. The "Danger Intakes" I can deal with, but I hate doing the kites and the skull logo on black would look terrible as stickers, not to mention it's hard to trim round shapes perfectly. Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 4, 2015 Share Posted August 4, 2015 I really hope it comes with those markings as tampo at minimum. The "Danger Intakes" I can deal with, but I hate doing the kites and the skull logo on black would look terrible as stickers, not to mention it's hard to trim round shapes perfectly. 100% sure, they'll have kites and skulls tampo'd Quote Link to comment Share on other sites More sharing options...
treatment Posted August 5, 2015 Share Posted August 5, 2015 Somehow, I really wanna see David go berserk if/when this 0S does turn out pinkish after purchase... Also, I'll never ever trust Arcadia's promo shots. Quote Link to comment Share on other sites More sharing options...
wmkjr Posted August 5, 2015 Share Posted August 5, 2015 Also, I'll never ever trust Arcadia's promo shots. Haha! Bait and switch colors like the VF-0D? Quote Link to comment Share on other sites More sharing options...
treatment Posted August 5, 2015 Share Posted August 5, 2015 https://twitter.com/Mrk_arcadia/status/628427128745299969/photo/1 So remind me again why are the head's laser-turrets lacking the red stripings this time? Quote Link to comment Share on other sites More sharing options...
abbadon Posted August 5, 2015 Share Posted August 5, 2015 Lovely! Quote Link to comment Share on other sites More sharing options...
subie81 Posted August 5, 2015 Share Posted August 5, 2015 Man, the anticipation for this valk is killing me!!!! It keeps getting prettier and prettier! Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 5, 2015 Share Posted August 5, 2015 Somehow, I really wanna see David go berserk if/when this 0S does turn out pinkish after purchase... Also, I'll never ever trust Arcadia's promo shots. lol, i've been contemplating if i should order the 0s after it is released like i did with the 0d a few weeks after everyone got theirs. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 5, 2015 Share Posted August 5, 2015 So remind me again why are the head's laser-turrets lacking the red stripings this time? Not to mention the missing black paint on the leg fins. Quote Link to comment Share on other sites More sharing options...
Kyp Durron Posted August 5, 2015 Share Posted August 5, 2015 Haha! Bait and switch colors like the VF-0D? Yeah, I haven't forgotten that either. if Shin's VF-0A's colors don't turn out right, I'm not going to pre order Roy's, I'll way till someone gets one in hand. Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted August 5, 2015 Share Posted August 5, 2015 (edited) Not to mention the missing black paint on the leg fins. MrK. said the black part of the leg fins comes as a sticker and we should apply it after carefuly trimming it!! Edited August 5, 2015 by Ignacio Ocamica Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 5, 2015 Share Posted August 5, 2015 MrK. said the black part of the leg fins comes as a sticker and we should apply it after carefuly trimming it!! So does the red stripes markings on the head laser? Quote Link to comment Share on other sites More sharing options...
Loop Posted August 5, 2015 Share Posted August 5, 2015 MrK. said the black part of the leg fins comes as a sticker and we should apply it after carefuly trimming it!! Your joking right?? Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted August 5, 2015 Share Posted August 5, 2015 Your joking right?? It was during sarcasm mode on. Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 5, 2015 Share Posted August 5, 2015 MrK. said the black part of the leg fins comes as a sticker and we should apply it after carefuly trimming it!! hahaha Quote Link to comment Share on other sites More sharing options...
Kyp Durron Posted August 5, 2015 Share Posted August 5, 2015 MrK. said the black part of the leg fins comes as a sticker and we should apply it after carefuly trimming it!! Wouldn't surprise me in the least. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 5, 2015 Share Posted August 5, 2015 And after all that, we still forgive Arcadia. Quote Link to comment Share on other sites More sharing options...
Loop Posted August 5, 2015 Share Posted August 5, 2015 It was during sarcasm mode on. I thought so, but needed a conformation. I was hoping he did not make some hair brain announcement on twitter that I couldn't read. And after all that, we still forgive Arcadia. Well they do have some pretty sexy molds to say the least and that matte finish does it for me . I just wish they would include water slide decals if they are not going to tampo print the markings instead of stickers. Quote Link to comment Share on other sites More sharing options...
Valkyrie addict Posted August 6, 2015 Share Posted August 6, 2015 Has MrK ever explained why are the valks coming with almost no tampo now? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.