no3Ljm Posted November 19, 2021 Posted November 19, 2021 (edited) 11 minutes ago, kajnrig said: How are the proportions on these? The VF-0S especially looks a bit off, but I'm not sure if I'm just seeing things. There were also prototypes shown way back when for a bunch of stuff from the sequels, right? YF/VF-19s, VF-11s, etc., all of which became vaporware? These are just the 2 images they've shown so at this point it's very hard to see how the proportions are. And if I remember correctly, a displayed VF-0S in fighter mode was also shown years ago alongside the VF-19/VF-4/etc. The event where they're probably going to showcase Macross stuff is still going to be in 7 hours. Youtube video below. So at this point all we can do is wait. Edited November 19, 2021 by no3Ljm Quote
sqidd Posted November 19, 2021 Posted November 19, 2021 (edited) Why purple? That's not cannon is it? Edited November 19, 2021 by sqidd Quote
505thAirborne Posted November 19, 2021 Posted November 19, 2021 1 hour ago, sqidd said: Why purple? That's not cannon is it? Yeah, hopefully those colors are adjusted. I'd prefer to see it in more of a Desert Tan shade, time will tell with the final product. Quote
Lolicon Posted November 19, 2021 Posted November 19, 2021 1 hour ago, sqidd said: Why purple? That's not cannon is it? Trying to one up Arcadia's pink-white. Quote
wmkjr Posted November 19, 2021 Posted November 19, 2021 (edited) By the looks of the survey results of each of them it seems these are heavily supported. Hopefully Bandai takes the feedback and releases them for sale. Edited November 20, 2021 by wmkjr Quote
jvmacross Posted November 19, 2021 Posted November 19, 2021 The line-up has been there in plain sight since 2015....... Quote
seti88 Posted November 19, 2021 Posted November 19, 2021 3 hours ago, Slave IV said: How could they?! Preorder cancelled! J/K, those differences don't concern me. 😆 It didn’t concern me before but I must admit it does a little to me now cos it’s more than a bit off. Maybe it won’t again if the official photos are fetching enough hahah... 15 minutes ago, jvmacross said: The line-up has been there in plain sight since 2015....... I need a CSI picture enhancement heheh...It was mentioned that it was an 0a and not an 0s at that time if I recall..doesn’t matter... My fools hope was and still is, to see the macross frontier HMR displayed next to it!! Quote
mechaninac Posted November 20, 2021 Posted November 20, 2021 5 hours ago, sqidd said: Why purple? That's not cannon is it? Bandai will Bandai; that's why. Quote
brooklynmacross Posted November 20, 2021 Posted November 20, 2021 Excited for this. Definitely a series that needs more attention. Hope it gets the DX treatment as well Quote
sqidd Posted November 20, 2021 Posted November 20, 2021 7 minutes ago, brooklynmacross said: Excited for this. Definitely a series that needs more attention. Hope it gets the DX treatment as well I'd lose my mind if they released DX Destroids. Quote
Convectuoso Posted November 20, 2021 Posted November 20, 2021 18 minutes ago, no3Ljm said: Where's the preorder button??? Quote
ScrambledValkyrie Posted November 20, 2021 Posted November 20, 2021 Haven't posted here in quite a while, but have to say that I am thrilled to see that Macross HMR is not forgotten and seems to have great things ahead. VF-0 seems a given, VF-1S and Tomahawk seem likely... all fantastic additions to the lineup. Looking forward to PO time! Quote
Lolicon Posted November 20, 2021 Posted November 20, 2021 1 minute ago, ScrambledValkyrie said: Haven't posted here in quite a while, but have to say that I am thrilled to see that Macross HMR is not forgotten and seems to have great things ahead. VF-0 seems a given, VF-1S and Tomahawk seem likely... all fantastic additions to the lineup. Looking forward to Dreading PO time madness! Fixed. Quote
brooklynmacross Posted November 20, 2021 Posted November 20, 2021 A DX Regult would be stunning, but then we would have the issue of putting a pilot inside. All I really want is a DX VF-0S and buy 3. Display one, keep one sealed, and one for just in case. Quote
ScrambledValkyrie Posted November 20, 2021 Posted November 20, 2021 2 minutes ago, Lolicon said: Fixed. I don't remember any HMR POs being that bad, certainly nowhere near the level of the Roy 1S DX. At any rate, the fact that we may actually - finally - get some more of these makes me not really care how crazy PO might be. Quote
no3Ljm Posted November 20, 2021 Posted November 20, 2021 Just now, seti88 said: That air intake gap. Preorder cancelled. Quote
Lolicon Posted November 20, 2021 Posted November 20, 2021 1 minute ago, no3Ljm said: That air intake gap. Preorder cancelled. Stabilizers sticking straight up, head lasers pointing upward.... the Bandai employee tasked with transforming their displays clearly ran out of F's to give long ago. The feet... well, maybe Roy is thrust vectoring. Quote
sh9000 Posted November 20, 2021 Posted November 20, 2021 Looking forward to adding another Jolly Rogers to the group. Quote
no3Ljm Posted November 20, 2021 Posted November 20, 2021 1 minute ago, Lolicon said: Stabilizers sticking straight up, head lasers pointing upward.... the Bandai employee tasked with transforming their displays clearly ran out of F's to give long ago. The feet... well, maybe Roy is thrust vectoring. So you're cancelling your preorder too? Quote
Lolicon Posted November 20, 2021 Posted November 20, 2021 Just now, no3Ljm said: So you're cancelling your preorder too? I'm emailing Amiami right now to cancel. Quote
Black Valkyrie Posted November 20, 2021 Posted November 20, 2021 Very nice, lost hope with this line. Quote
Ignacio Ocamica Posted November 20, 2021 Posted November 20, 2021 7 hours ago, no3Ljm said: So you're cancelling your preorder too? Left wing appears to be slightly warped so I'm cancelling too! Quote
brooklynmacross Posted November 20, 2021 Posted November 20, 2021 Totally getting the VF-0s and I'm also excited about the Soul of Chogokin Kiryu! Quote
jvmacross Posted November 20, 2021 Posted November 20, 2021 I hope there are more SDFM related collectibles coming out in honor of SDFM's 40th....sure, it's great for Bandai to have resurrected the "pics" of the Tomahawk and "mentioned" the Phalanx...only to remove the mention.....but it just didn't seem like enough...ok, they did also show a derpy SD VF-1S...but even that was not in SDFM colors... My concern now is that since they are free to release NON-SDFM/DYRL items outside of Japan....from a business/profit perspective, the temptation to diminish the release of SDFM/DYRL items may be tempting....hopefully, they are not trying to determine the "demand for Macross" outside of Japan with sales data derived from NON-SDFM/DYRL items....I do not think it would provide them with accurate information Quote
sh9000 Posted November 20, 2021 Posted November 20, 2021 (edited) 4 hours ago, jvmacross said: I hope there are more SDFM related collectibles coming out in honor of SDFM's 40th....sure, it's great for Bandai to have resurrected the "pics" of the Tomahawk and "mentioned" the Phalanx...only to remove the mention.....but it just didn't seem like enough...ok, they did also show a derpy SD VF-1S...but even that was not in SDFM colors... My concern now is that since they are free to release NON-SDFM/DYRL items outside of Japan....from a business/profit perspective, the temptation to diminish the release of SDFM/DYRL items may be tempting....hopefully, they are not trying to determine the "demand for Macross" outside of Japan with sales data derived from NON-SDFM/DYRL items....I do not think it would provide them with accurate information Agreed. I welcome all HMR releases from other Macross series but they should release more from SDFM/DYRL. Edited November 20, 2021 by sh9000 Quote
fifbeat Posted November 20, 2021 Posted November 20, 2021 (edited) So, regardless of 1/100 scale, that HMR Macross Zero valk is going to stand taller than the HMR Macross DYRM/SDFM valks, right? Edited November 20, 2021 by fifbeat Quote
Convectuoso Posted November 20, 2021 Posted November 20, 2021 9 minutes ago, fifbeat said: So, regardless of 1/100 scale, that HMR Macross Zero valk is going to stand taller than the HMR Macross DYRM/SDFM valks, right? It should, but unlike the Vf100 line, the HMR line has never been officially labeled as 1/100, so it may be of a similar size Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.