ChaoticYeti Posted August 14, 2015 Author Posted August 14, 2015 (edited) Sorry, no. The v2, Brera's with Super parts, and now the re-issued Grace.The DX standing and banking adapters will work with those valks.http://yetistand.bigcartel.com/product/dx-standing-adapter http://yetistand.bigcartel.com/product/dx-banking-adapter Edited August 14, 2015 by ChaoticYeti Quote
Sildani Posted August 14, 2015 Posted August 14, 2015 Oh right. We use Bandai's clips. Sorry, I feel dumb. Quote
spanner Posted August 15, 2015 Posted August 15, 2015 Oh right. We use Bandai's clips. Sorry, I feel dumb. mate don't feel so bad.. believe me this goes around! Quote
MacrossJunkie Posted August 15, 2015 Posted August 15, 2015 I really want to get a stand, but I really have no idea what to get in order to hold up to 5 valks like as pictured here: Skulls revisited by Wm K, on Flickr I can't really make out all the pieces being used and I don't want to accidentally buy the wrong parts or find I'm missing some that are needed. I feel dumb... Quote
wmkjr Posted August 15, 2015 Posted August 15, 2015 (edited) Sorry for the pic quality . Was lazy to set up my stuff. Anyhow, just testing what it could hold. Ivanov is holding a spot for the VF-0D. I'll peel off the covering later. Zero quad: 1 standard arm 2 double arm 4 XL arms 2 elbows Metric hex bolt from hardware store Adapters to fit Muwahaha! Peeled off the covers and looks cleaner on a single base: Same parts list as the zero quad with the inclusion of the following: 2x standard arm 1 more bolt from hardware store extra rubber washers Those are the parts breakdown plus the yetistand alpha base . Same setup except with a standard arm holding the VF-25. It's a custom mix of parts from Yetistand and the hardware store. Hex bolt size/type is in my yetistand gallery. The extra rubber washers would be the hardest to get if you don't have extra unused stands lying around. I must add that it has a very large area and putting them on might be a hassle if you don't put them on in a certain order as it wants to topple over because of the weight distribution. Edited August 15, 2015 by wmkjr Quote
spanner Posted August 15, 2015 Posted August 15, 2015 I really want to get a stand, but I really have no idea what to get in order to hold up to 5 valks like as pictured here: Skulls revisited by Wm K, on Flickr I can't really make out all the pieces being used and I don't want to accidentally buy the wrong parts or find I'm missing some that are needed. I feel dumb... Love! ♡ Quote
MacrossJunkie Posted August 15, 2015 Posted August 15, 2015 Those are the parts breakdown plus the yetistand alpha base . Same setup except with a standard arm holding the VF-25. It's a custom mix of parts from Yetistand and the hardware store. Hex bolt size/type is in my yetistand gallery. The extra rubber washers would be the hardest to get if you don't have extra unused stands lying around. I must add that it has a very large area and putting them on might be a hassle if you don't put them on in a certain order as it wants to topple over because of the weight distribution. Thanks so much! Quote
ChaoticYeti Posted August 15, 2015 Author Posted August 15, 2015 Those are the parts breakdown plus the yetistand alpha base . Same setup except with a standard arm holding the VF-25. It's a custom mix of parts from Yetistand and the hardware store. Hex bolt size/type is in my yetistand gallery. The extra rubber washers would be the hardest to get if you don't have extra unused stands lying around. I must add that it has a very large area and putting them on might be a hassle if you don't put them on in a certain order as it wants to topple over because of the weight distribution. Danco/Danby 1/2 rubber washer. http://m.sears.com/danby-1-2-flat-washer/p-SPM6582745501 This may help you find them locally, but I have been getting a huge discount for buying in bulk. I have no problem putting a few extra along with larger orders, or for repeat customers. Just let me know if you need them. Quote
MacrossJunkie Posted August 15, 2015 Posted August 15, 2015 (edited) Danco/Danby 1/2 rubber washer. http://m.sears.com/danby-1-2-flat-washer/p-SPM6582745501 This may help you find them locally, but I have been getting a huge discount for buying in bulk. I have no problem putting a few extra along with larger orders, or for repeat customers. Just let me know if you need them. Thanks! That's helpful to know. Looks like the dual arms are currently sold out. They must be pretty popular. Edited August 15, 2015 by MacrossJunkie Quote
ChaoticYeti Posted August 15, 2015 Author Posted August 15, 2015 Thanks! That's helpful to know.Looks like the dual arms are currently sold out. They must be pretty popular. They have been very popular. I can print some silver dual arms if you'd like. Quote
MacrossJunkie Posted August 15, 2015 Posted August 15, 2015 They have been very popular. I can print some silver dual arms if you'd like. Will you have a restock of the clear ones at some point? Quote
ChaoticYeti Posted August 15, 2015 Author Posted August 15, 2015 For sure, but it may be a few months. There are a few more items nearing low stock, and I'd like to order everything at once. It is usually a 3-4 week turn around on the acrylic once ordered. Quote
MacrossJunkie Posted August 15, 2015 Posted August 15, 2015 For sure, but it may be a few months. There are a few more items nearing low stock, and I'd like to order everything at once. It is usually a 3-4 week turn around on the acrylic once ordered. Okay, cool. I wanted to get everything in at once to save on shipping, but maybe I'll get some basics first just to have something to pose with for single shots until then if it will be a few months. Quote
ChaoticYeti Posted August 18, 2015 Author Posted August 18, 2015 (edited) Just put my first set together in a long while, and decided to make an xl brick adapter. The bottom of this set has a trap door, so I made a 6x6. http://www.yetistand.com/product/yetistand-xl-brick-adapter Edited August 18, 2015 by ChaoticYeti Quote
ChaoticYeti Posted August 18, 2015 Author Posted August 18, 2015 And here is the adapter for the version 1 VF-27. http://www.yetistand.com/product/bandai-vf-27-version-1-adapter Quote
no3Ljm Posted August 22, 2015 Posted August 22, 2015 My hands is just itching to post on this thread. By the way, VF-0A is just around the corner. For those last minute preorders, here's some links: HLJ at Y31320 http://www.hlj.com/product/ACA82120/Sci Amiami at Y29700 http://www.amiami.com/top/detail/detail?gcode=FIGURE-011500 Quote
spanner Posted August 23, 2015 Posted August 23, 2015 gahhh those photos on the amiami listing look sooo good! Im so tempted to re-order a second one again! Quote
no3Ljm Posted August 23, 2015 Posted August 23, 2015 gahhh those photos on the amiami listing look sooo good! Im so tempted to re-order a second one again! No one's stopping you sir. Quote
spanner Posted August 23, 2015 Posted August 23, 2015 No one's stopping you sir. well.. well yes my wallet and bank account might file for a divorce! Quote
no3Ljm Posted August 23, 2015 Posted August 23, 2015 well.. well yes my wallet and bank account might file for a divorce! You need a good lawyer for that, Spanner? Hahaha! lol Question for ChaoticYeti. I was browsing the store site and I can't figure out what's the length and depth size of the standard arm that comes with the yetistand set. Not sure too if the size of each arms were already posted in this thread. For your next update on the site, is it ok to post the dimension sizes for the base and the arm lengths so it's easier to calculate for displaying purposes. Thanks so much. Looking forward to your reply. Quote
spanner Posted August 23, 2015 Posted August 23, 2015 You need a good lawyer for that, Spanner? Hahaha! lol or maybe just a better financial plan so it doesn't hurt so much when I do spend money.. Quote
no3Ljm Posted August 23, 2015 Posted August 23, 2015 or maybe just a better financial plan so it doesn't hurt so much when I do spend money.. When you found one, can you also recommend it to me too. By the way, you have YetiStands, right? If it's not too much of a trouble, can you please PM me the dimension of the regular arm the one that came with the default set. The thickness of the acrylic, depth, and length. Please. Thanks so much. Quote
ChaoticYeti Posted August 23, 2015 Author Posted August 23, 2015 When you found one, can you also recommend it to me too. By the way, you have YetiStands, right? If it's not too much of a trouble, can you please PM me the dimension of the regular arm the one that came with the default set. The thickness of the acrylic, depth, and length. Please. Thanks so much. You are looking for the dimensions of the arm? 5.6mm thick and about 4" long. Quote
no3Ljm Posted August 23, 2015 Posted August 23, 2015 You are looking for the dimensions of the arm? 5.6mm thick and about 4" long. Hey Yeti. Thanks for the info. I'm trying to see if it's going to fit on the figure where I'm going to use it for. Especially the thickness. Quote
quineche Posted August 24, 2015 Posted August 24, 2015 Hi, how long does it take to have the silver double arms available? Thanks! Quote
ChaoticYeti Posted August 24, 2015 Author Posted August 24, 2015 Hi, how long does it take to have the silver double arms available? Thanks! I will be putting them on the website tomorrow. Quote
spanner Posted August 24, 2015 Posted August 24, 2015 When you found one, can you also recommend it to me too. When I do I certainly shall! Quote
Valkyrie Driver Posted August 24, 2015 Posted August 24, 2015 This isn't stand related, or even Macross related, but Yeti, did your avatar just blink at me, or am I going insane? There! It did it again, and again... Please god tell me I'm not losing my mind... Quote
spanner Posted August 24, 2015 Posted August 24, 2015 This isn't stand related, or even Macross related, but Yeti, did your avatar just blink at me, or am I going insane? There! It did it again, and again... Please god tell me I'm not losing my mind... haha! yeah it made me do a double take as well! Quote
Saburo Posted August 24, 2015 Posted August 24, 2015 haha! yeah it made me do a double take as well! I just noticed that too, I thought I was seeing things. Quote
ChaoticYeti Posted August 24, 2015 Author Posted August 24, 2015 Two items have been added to the store. YetiStand Printed Dual Arm YetiStand Printed Knuckle Quote
akteon Posted August 24, 2015 Posted August 24, 2015 Will the knuckle eventually be offered in acrylic, once you make your next order of acrylic? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.