locidm Posted December 1, 2015 Posted December 1, 2015 i think i'm finally ready to get one of these stands, but they appear out of stock on your website. Will they become available again in the near future? Quote
wmkjr Posted December 1, 2015 Posted December 1, 2015 I think he's waiting for his Glowforge to come in before restocking. Quote
ChaoticYeti Posted December 2, 2015 Author Posted December 2, 2015 I think he's waiting for his Glowforge to come in before restocking. This is what I am hoping for, but it looks like it may be a few months out. Since that is the case, I am looking into ordering another batch of cuts. Researching local vendors now that I am at our new location. I'll update this thread either way. Quote
locidm Posted December 2, 2015 Posted December 2, 2015 Thanks for the update Yeti. This had led me looking into glowforge, and it is very impressive in its ability! The price is not bad either considering what it is. I was looking into its FAQ and it does say orders will ship in first half of 2016 and into 3Q 2016. Quote
ChaoticYeti Posted December 2, 2015 Author Posted December 2, 2015 Yep. There was a chance I would have gotten it this month to test out, but that is looking less likely. Quote
ChaoticYeti Posted December 5, 2015 Author Posted December 5, 2015 I hope people were serious about wanting stands! I just made an order to hopefully cover the gap until I get my laser cutter. I will update by pm/email to those that have been inquiring when my order arrives. Quote
wmkjr Posted December 5, 2015 Posted December 5, 2015 Is there gonna be the acrylic knuckles in this order too? Quote
ChaoticYeti Posted December 5, 2015 Author Posted December 5, 2015 Is there gonna be the acrylic knuckles in this order too? Yes! I made sure to order some of those, and the dual arms. Quote
cmal Posted December 5, 2015 Posted December 5, 2015 Think you'll be able to finish up those adapter requests in time for your acrylic order? If there are any available, I'd like to add some of the regular (not XL) arms to my planned purchase. Quote
ChaoticYeti Posted December 5, 2015 Author Posted December 5, 2015 Think you'll be able to finish up those adapter requests in time for your acrylic order? If there are any available, I'd like to add some of the regular (not XL) arms to my planned purchase. The Arcadia stand adapter? Yeah. I apologize. I have been swampped at work. Quote
koonfasa Posted December 5, 2015 Posted December 5, 2015 (edited) I'm serious, but I'm certainly in no rush. I have a few big tickets on preorder that goes by the name of Ironman. Edited December 5, 2015 by koonfasa Quote
ChaoticYeti Posted December 5, 2015 Author Posted December 5, 2015 I'm serious, but I'm certainly in no rush. I have a few big tickets on preorder that goes by the name of Ironman. Hot Toys? Quote
ChaoticYeti Posted December 8, 2015 Author Posted December 8, 2015 Finally refined the arcadia stand adapter. I will most likely have this for sale this week. Quote
jenius Posted December 9, 2015 Posted December 9, 2015 I think the Yeti base is great though by way of its heft, I highly recommend the base for those in the market but I have purchased a dx starter kit and look forward to testing it. Quote
ChaoticYeti Posted December 9, 2015 Author Posted December 9, 2015 I think the Yeti base is great though by way of its heft, I highly recommend the base for those in the market but I have purchased a dx starter kit and look forward to testing it. I greatly agree. A large part of why my stands are so good is the weight of the base. I do enjoy accommodating requests, but you will miss out on the stability of the YetiStand base when using one of the stand base adapters for Arcadia, and Bandai stands. Quote
mickyg Posted December 9, 2015 Posted December 9, 2015 Seconded! The complete article is definitely a better beast than any adaptations to current stands. And Jenius, I hope to beat you to a full (albeit written, with pictures and not video) review of the starter kit in the not too distant future. Yeti - apologies on my lateness so far. There's been far too much real life for me lately to devote the time I had planned to said review. But it is coming. And so is Christmas, incidentally... Quote
cmal Posted December 10, 2015 Posted December 10, 2015 Well, since you're getting a batch to tide people over until you can cut your own, I was gonna try to grab a full stand to try out with one of my other toys. So you might get a repeat customer out of me in the future if they suit my needs. They look great in the photos, but this is an instance where I need one in the midst of my collection to see if it "fits in". Quote
ChaoticYeti Posted December 10, 2015 Author Posted December 10, 2015 Well, you requested the Arcadia one. I will put one in for free if/when you order a YetiStand. Quote
mickyg Posted December 10, 2015 Posted December 10, 2015 Well, since you're getting a batch to tide people over until you can cut your own, I was gonna try to grab a full stand to try out with one of my other toys. So you might get a repeat customer out of me in the future if they suit my needs. They look great in the photos, but this is an instance where I need one in the midst of my collection to see if it "fits in". I don't know what it is, but they just work on every level, including how they "fit in" with everything else. Seriously, do yourself a favour and grab one. I'm showing lots of bias here, obviously, but personally, I think they look even better than the photos. Quote
cmal Posted December 10, 2015 Posted December 10, 2015 I meant that I wanted to get a YetiStand since some stock was unexpectedly showing up. I'm actually really excited for the chance to get my hands on one relatively soon. Originally, I was planning to order a couple of the DX kits and some accessories for the Arcadias. I like the storage in the Arcadia stand, but the Bandai DX ones I'll replace in a heartbeat. So I'll probably rethink my order and I may end up using Yetis for more of my larger/heavier things in the future. Quote
ChaoticYeti Posted December 10, 2015 Author Posted December 10, 2015 Here are links for the Arcadia Macross stand adapter. http://www.yetistand.com/product/arcadia-macross-stand-starter-kit http://www.yetistand.com/product/arcadia-across-stand-base-pivot And a place holder for the acrylic knuckle. The acrylic is slated to arrive on the 16th. http://www.yetistand.com/product/yetistand-knuckle Quote
Blue Meanie Posted December 11, 2015 Posted December 11, 2015 I just moved into a new place, I will be placing an order right after the holidays. Have to see where they will fit in the room and which will be attached to the wall. Quote
ChaoticYeti Posted December 11, 2015 Author Posted December 11, 2015 I just moved into a new place, I will be placing an order right after the holidays. Have to see where they will fit in the room and which will be attached to the wall. Nice! On that note, I haven't touched my wall mounted valks in a few weeks. The arms have not dropped at all. Still very secure to the wall. Quote
Boroboy Posted December 11, 2015 Posted December 11, 2015 Wow, those look great wall mounted! Are you screwing the base directly into the wall, or are there keyhole slots in the base bottom to slip over screws? Or something else? I'm definitely going to be in for one of the starter kits! Quote
ChaoticYeti Posted December 11, 2015 Author Posted December 11, 2015 (edited) Dry wall anchors. Edited December 11, 2015 by ChaoticYeti Quote
koonfasa Posted December 11, 2015 Posted December 11, 2015 (edited) Wow that Slave 1 is awesome there!!! Is that thing still around, or will they make another? I want one! Anyway Ironman, lol. Maybe one Hot Toy, but a heavy one. More kind of a Sentinel one or three... I want one to play around with and a couple for fixed displays. Have to apologise though, these could be a long way off, but I know exactly what I want for my first purchase. Edited December 11, 2015 by koonfasa Quote
koonfasa Posted December 11, 2015 Posted December 11, 2015 (edited) Did I just see a new "Arcadia starter kit"? Actually I can't remember what I wanted, but I do know I posted it here somewhere. I'll just look back to it when I'm ready. I'm now wondering if you can get the Monster in jet mode surrounded by six Hi-Metal jets (or combination with explosion effects) pegged into your pegged base. Either escorting the ship or darting in different directions around it. That would look rad. Edited December 11, 2015 by koonfasa Quote
ChaoticYeti Posted December 11, 2015 Author Posted December 11, 2015 Care of Jenuis/anymoon.com Quote
jenius Posted December 11, 2015 Posted December 11, 2015 Those are the Robot Spirit releases, I might do a fighter mode escort with the HMRs soon but the scale would be off since the HMRs are like 1/90 and the VB6 is like 1/120. Quote
no3Ljm Posted December 11, 2015 Posted December 11, 2015 Those are the Robot Spirit releases, I might do a fighter mode escort with the HMRs soon but the scale would be off since the HMRs are like 1/90 and the VB6 is like 1/120. We can call it 'anime-magic'. Or use some excuse, 'it's just the perspective'. Quote
ChaoticYeti Posted December 16, 2015 Author Posted December 16, 2015 Acrylic just got in. Everything is back in stock. www.yetistand.com Quote
spanner Posted December 16, 2015 Posted December 16, 2015 Nice! On that note, I haven't touched my wall mounted valks in a few weeks. The arms have not dropped at all. Still very secure to the wall. madness!!! Quote
Saburo Posted December 16, 2015 Posted December 16, 2015 Acrylic just got in. Everything is back in stock. www.yetistand.com Hmmm... I might need to revise some of my stand setups with this piece. Nice computer area you have there, is that a crossbow on your desk? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.