Kanedas Bike Posted July 27, 2014 Posted July 27, 2014 The Flightpose had the paint wearing issue plus compared to the original, they aren't as good in quality. The original had a solid base with the black tip. The new one had instances of cracking where the screws went. They're priced well but the ones (I think it was Sithlord that use to sell them) were freakin solid. Got a few myself. Whoops - I meant original black tip stands. Am aware of the paint issues with the newer ones, but anime52k8 didn't specify which he feels are of such poor quality. At any rate, until Arcadia releases a smaller, more dynamic stand, or something along the lines of the original DYRL stands the debate will go on. -b. Quote
Pedro2k6 Posted July 27, 2014 Posted July 27, 2014 Good, dynamic poses? Oh boy, please be patient guys. Hopefully I'll beat Arcadia to you with a much better product. Your stands look great....sure I will wait for it. I hope you can make some clear stand. Quote
EXO Posted July 27, 2014 Posted July 27, 2014 Good, dynamic poses? Oh boy, please be patient guys. Hopefully I'll beat Arcadia to you with a much better product. I wouldn't worry. These stands never last long on the market and they get expensive fast. There's always room for more stands and not just for Macross toys. Quote
dapro Posted July 27, 2014 Posted July 27, 2014 I wouldn't mind pickup couple fazt pack and stands. Flight post is good for fighter mode but lacks for Gerwalk and robot mode as mention earlier. Quote
chyll2 Posted July 27, 2014 Posted July 27, 2014 Good, dynamic poses? Oh boy, please be patient guys. Hopefully I'll beat Arcadia to you with a much better product. we are waiting for your video by August 4 Quote
Sandman Posted July 27, 2014 Posted July 27, 2014 Arcadia's stand will probably be priced something ridiculous. I dont really want to pay a high price for a stand. Rather use that money for a valk. Quote
ChaoticYeti Posted July 27, 2014 Posted July 27, 2014 (edited) Your stands look great....sure I will wait for it. I hope you can make some clear stand. *Insert $Ï€!7 eating grin here* Edited July 27, 2014 by ChaoticYeti Quote
Pedro2k6 Posted July 27, 2014 Posted July 27, 2014 *Insert $Ï€!7 eating grin here* I don't understand my English is really poor Quote
ChaoticYeti Posted July 27, 2014 Posted July 27, 2014 I don't understand my English is really poor Expect to see clear stands. Quote
Falcon18 Posted July 27, 2014 Posted July 27, 2014 (edited) How much are the Arcadia stands going for? Andd.. Rather wait for Yeti's stands. Edited July 27, 2014 by Falcon18 Quote
Sildani Posted July 27, 2014 Posted July 27, 2014 (edited) Will buy from the Yeti because I'd like to support a MW member. Plus he'll make his stands with love, which you can always see and feel. Edited July 27, 2014 by Sildani Quote
ChaoticYeti Posted July 27, 2014 Posted July 27, 2014 Will buy from the Yeti because I'd like to support a MW member. Plus he'll make his stands with love, which you can always see and feel. You better believe I will. I have been sourcing and sorting bolts nuts and washers for a couple days now. My fingers smell like metal. Quote
anime52k8 Posted July 28, 2014 Posted July 28, 2014 Whoops - I meant original black tip stands. Am aware of the paint issues with the newer ones, but anime52k8 didn't specify which he feels are of such poor quality. Sorry, I was talking about the current production clear tip versions. I've got two of them, and I've gone through about 5 of the top plates between them, all of which have cracked to various degrees. also, the hollow bases are too light IMO to support heavier valks at more extreme angles. the old black tip versions are great, but they don't make them any more, and the new ones are a huge step down in quality to me. Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 (edited) Sorry, I was talking about the current production clear tip versions. I've got two of them, and I've gone through about 5 of the top plates between them, all of which have cracked to various degrees. also, the hollow bases are too light IMO to support heavier valks at more extreme angles. the old black tip versions are great, but they don't make them any more, and the new ones are a huge step down in quality to me. That is the same way I feel. I have a few of the original ones and they are pretty awesome. I ordered some late last year and was greatly disappointed with the changes. I have not experienced any issues will paint striping, but the loss of quality alone is part of what set me on the path to make my own stands. Edited July 28, 2014 by ChaoticYeti Quote
xrentonx Posted July 28, 2014 Posted July 28, 2014 The cracking and paint stripping is what did them in for me. I was considering picking them up but the way the clear plastic cracks killed them for me. Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 The cracking and paint stripping is what did them in for me. I was considering picking them up but the way the clear plastic cracks killed them for me. It is too thin. I had this argument with one of the potentional injection molders. They talked about wanting to put as little amount of plastic through the mold as possible to increase overhead. I'd rather be making less per part and sell a solid bit of kit. Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 See what I mean? Love. What is the point of making a shitty stand? Quote
Silverstreak Posted July 28, 2014 Posted July 28, 2014 To take the money and run. But we know you won't do that to us Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 (edited) To take the money and run. But we know you won't do that to us I'd make more money in the long run by having a good product people like. At least, that is how I am going about it. I have literally had conversations like this: Yeti: "I want it better" Guy: "But you could make it cheaper to produce, so more $ for us" Yeti: "I'd rather have it be a better product" Guy: "But, cheaper..." Yeti: "Better" Guy: "Cheaper?" Yeti: "Better" If I go the kickstarter funded injection molded route I feel like I have a place I can use, but most places just want to achieve the cheapest to make product. There has to be a balance, especially with collectors. You guys will crucify a mediocre stand. If there is a cost/quality balance, mine is going to swing to the higher quality side. Edited July 28, 2014 by ChaoticYeti Quote
Kanedas Bike Posted July 28, 2014 Posted July 28, 2014 Sorry, I was talking about the current production clear tip versions. I've got two of them, and I've gone through about 5 of the top plates between them, all of which have cracked to various degrees. also, the hollow bases are too light IMO to support heavier valks at more extreme angles. the old black tip versions are great, but they don't make them any more, and the new ones are a huge step down in quality to me. Gotcha, I'd known about members having issues with paint stripping on the new versions but I was not aware (or just forgot) about those other issues. So yeah, those do indeed sound like junk. I'd make more money in the long run by having a good product people like. At least, that is how I am going about it. I have literally had conversations like this: Yeti: "I want it better" Guy: "But you could make it cheaper to produce, so more $ for us" Yeti: "I'd rather have it be a better product" Guy: "But, cheaper..." Yeti: "Better" Guy: "Cheaper?" Yeti: "Better" If I go the kickstarter funded injection molded route I feel like I have a place I can use, but most places just want to achieve the cheapest to make product. There has to be a balance, especially with collectors. You guys will crucify a mediocre stand. If there is a cost/quality balance, mine is going to swing to the higher quality side. Gotta love people that are only in it for their bottom-line. It truly is lost on some people/businesses/whatever that if you provide a better service or product then you WILL make more money in the long run versus a quicker buck. Props to you for working on stands that the community is interested in and even more props for sticking to your principles. -b. Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 Gotcha, I'd known about members having issues with paint stripping on the new versions but I was not aware (or just forgot) about those other issues. So yeah, those do indeed sound like junk. Gotta love people that are only in it for their bottom-line. It truly is lost on some people/businesses/whatever that if you provide a better service or product then you WILL make more money in the long run versus a quicker buck. Props to you for working on stands that the community is interested in and even more props for sticking to your principles. -b. I am not willing to put my time, money, and energy into something I wouldn't want for myself. Quote
DuffCon Posted July 28, 2014 Posted July 28, 2014 Yeti, any idea the ballpark of your stand price? Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 (edited) Yeti, any idea the ballpark of your stand price? I do. Wait for the vid. I don't want to say anything yet. I don't have my order in hand from the vendor. It would be irresponsible to put a price to it yet, but I know what I want to sell it for. Edited July 28, 2014 by ChaoticYeti Quote
Falcon18 Posted July 28, 2014 Posted July 28, 2014 I'd make more money in the long run by having a good product people like. At least, that is how I am going about it. I have literally had conversations like this: Yeti: "I want it better" Guy: "But you could make it cheaper to produce, so more $ for us" Yeti: "I'd rather have it be a better product" Guy: "But, cheaper..." Yeti: "Better" Guy: "Cheaper?" Yeti: "Better" If I go the kickstarter funded injection molded route I feel like I have a place I can use, but most places just want to achieve the cheapest to make product. There has to be a balance, especially with collectors. You guys will crucify a mediocre stand. If there is a cost/quality balance, mine is going to swing to the higher quality side. Respect to you with your firm stand on better quality products. Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 Thanks. Not trying to be high and mighty. I just don't want to end up with a piece of junk. Quote
Gakken85 Posted July 28, 2014 Author Posted July 28, 2014 Do you plan on coloring the macross symbol red? Sorry if that was covered elsewhere. Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 (edited) Do you plan on coloring the macross symbol red? Sorry if that was covered elsewhere. Sorry. They have gone far beyond those first kite based ones. I took down most of the revised pictures due to advice from a patent lawyer I met with. The stands I am making come with no licensed insignia's. Edited July 28, 2014 by ChaoticYeti Quote
Pedro2k6 Posted July 28, 2014 Posted July 28, 2014 I prefer that way too. Saw your early pics with the symbol and they look great...but if you wanna sell this, you have to do all the stand generic so any other collector (not only macross) can enjoy it. Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 I prefer that way too. Saw your early pics with the symbol and they look great...but if you wanna sell this, you have to do all the stand generic so any other collector (not only macross) can enjoy it. Exactly. Quote
The Old Man Posted July 28, 2014 Posted July 28, 2014 Sorry. They have gone far beyond those first kite based ones. I took down most of the revised pictures due to advice from a patent lawyer I met with. The stands I am making come with no licensed insignia's. Should we be reading anything into that 'come' in italics? Quote
ChaoticYeti Posted July 28, 2014 Posted July 28, 2014 Should we be reading anything into that 'come' in italics? Spend your patience as a currency you have plenty of. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.