no3Ljm Posted July 10, 2014 Posted July 10, 2014 Nice! So this is a ver 1 add-on parts on the renewal VF-25F? Cool! Quote
Duymon Posted July 10, 2014 Posted July 10, 2014 Nice! but aren't the Galia Fold parts available for the v1 Valks only? Nope... that's a renewal 25G they are on :0 the wing mounted stuff worked just fine Quote
spanner Posted July 10, 2014 Author Posted July 10, 2014 Nope... that's a renewal 25G they are on :0 the wing mounted stuff worked just fine oh.. I would happily get a set but I only have one 25G and I kinda prefer it in Battroid mode so I can pose it with the gun! Quote
KH355hamdi Posted July 10, 2014 Posted July 10, 2014 You need to put the speakers on michael :0 I left my Michael at my home country. I'm on a long leave for study at the moment. Quote
spanner Posted July 11, 2014 Author Posted July 11, 2014 The Armored Parts for Ozma arrived this morning.. I gotta say it was quite a painful challenge getting it all together and standing upright! From what I could tell the parts have been used / fitted previously and some things were a little loose and floppy like the top mount missile launcher bays which sit either side of the head. Did a small modification hack to the ball joints in an effort to stiffen them up a bit and they now sit a little better. I swapped out the chest plate inward opening missile bay doors in favor of the outward opening doors as one of the doors was floppy and had some yellow paint spill on the inner side which looked crap.. manufacturing defect I assume? I did manage to scrape some of that paint off but I wont be using it. And the left upper leg section cover for all its worth simply wont fit properly. Its sitting on there ok now but if just doesn't lock in. Yes I did take the intake fan covers off.. All in all Ozma looks totally bad ass! And it all just fits in between the shelves! The upper missile launcher bay doors have about 1mm of room to spare when fully opened.. Clearly Bandai intended these parts to be fitted only when the Valkyrie is on the display stand but as the shelf height on the Klingsbo is much shallower than the the Detolf for example I am unable to have it setup on the stand.. I guess I could remove one of the shelves and put more on them on the stands but I think the display would look shite.. might give it a go in the future who knows.. Also had to rig up a post from a small Minmay figure I had which now supports the weight of the parts from behind. Can't say I like having it there visible but at least Ozma is able to stand up without toppling over. Was a little frustrating to get it all sorted but its done and im happy! For a while there I was thinking stuff it I won't fit the parts but im glad I persisted with it all! Here are some photos.. Quote
Saburo Posted July 11, 2014 Posted July 11, 2014 The Armored Parts for Ozma arrived this morning.. I gotta say it was quite a painful challenge getting it all together and standing upright! From what I could tell the parts have been used / fitted previously and some things were a little loose and floppy like the top mount missile launcher bays which sit either side of the head. Did a small modification hack to the ball joints in an effort to stiffen them up a bit and they now sit a little better. I swapped out the chest plate inward opening missile bay doors in favor of the outward opening doors as one of the doors was floppy and had some yellow paint spill on the inner side which looked crap.. manufacturing defect I assume? I did manage to scrape some of that paint off but I wont be using it. And the left upper leg section cover for all its worth simply wont fit properly. Its sitting on there ok now but if just doesn't lock in. Yes I did take the intake fan covers off.. All in all Ozma looks totally bad ass! And it all just fits in between the shelves! The upper missile launcher bay doors have about 1mm of room to spare when fully opened.. Clearly Bandai intended these parts to be fitted only when the Valkyrie is on the display stand but as the shelf height on the Klingsbo is much shallower than the the Detolf for example I am unable to have it setup on the stand.. I guess I could remove one of the shelves and put more on them on the stands but I think the display would look shite.. might give it a go in the future who knows.. Also had to rig up a post from a small Minmay figure I had which now supports the weight of the parts from behind. Can't say I like having it there visible but at least Ozma is able to stand up without toppling over. Was a little frustrating to get it all sorted but its done and im happy! For a while there I was thinking stuff it I won't fit the parts but im glad I persisted with it all! Here are some photos.. Congrats spanner76! Taking pics of the VF-25S with Armored parts took me the longest amount of time due to the balancing issue. Its ok, though I like how awesome it looks. Quote
spanner Posted July 11, 2014 Author Posted July 11, 2014 Ahhh that's a bit better! made up a new support for the armor parts.. sits more level & stable now! and no ugly base.. Quote
Saburo Posted July 11, 2014 Posted July 11, 2014 (edited) Ahhh that's a bit better! made up a new support for the armor parts.. sits more level & stable now! and no ugly base.. Very nice! What did you make the support out of? Edited July 11, 2014 by Saburo Quote
The Old Man Posted July 11, 2014 Posted July 11, 2014 The Armored Parts for Ozma arrived this morning.. I gotta say it was quite a painful challenge getting it all together and standing upright! From what I could tell the parts have been used / fitted previously and some things were a little loose and floppy like the top mount missile launcher bays which sit either side of the head. Did a small modification hack to the ball joints in an effort to stiffen them up a bit and they now sit a little better. I swapped out the chest plate inward opening missile bay doors in favor of the outward opening doors as one of the doors was floppy and had some yellow paint spill on the inner side which looked crap.. manufacturing defect I assume? I did manage to scrape some of that paint off but I wont be using it. And the left upper leg section cover for all its worth simply wont fit properly. Its sitting on there ok now but if just doesn't lock in. Yes I did take the intake fan covers off.. All in all Ozma looks totally bad ass! And it all just fits in between the shelves! The upper missile launcher bay doors have about 1mm of room to spare when fully opened.. Clearly Bandai intended these parts to be fitted only when the Valkyrie is on the display stand but as the shelf height on the Klingsbo is much shallower than the the Detolf for example I am unable to have it setup on the stand.. I guess I could remove one of the shelves and put more on them on the stands but I think the display would look shite.. might give it a go in the future who knows.. Also had to rig up a post from a small Minmay figure I had which now supports the weight of the parts from behind. Can't say I like having it there visible but at least Ozma is able to stand up without toppling over. Was a little frustrating to get it all sorted but its done and im happy! For a while there I was thinking stuff it I won't fit the parts but im glad I persisted with it all! Here are some photos.. Ahhh that's a bit better! made up a new support for the armor parts.. sits more level & stable now! and no ugly base.. Very nice. Good work with the support, clever stuff. Quote
spanner Posted July 11, 2014 Author Posted July 11, 2014 Its just left over frame from a model kit.. you know the surround which holds all the bits before you cut them off etc etc.. Cut them down to size and super glued it all together. Easy! Quote
chyll2 Posted July 11, 2014 Posted July 11, 2014 ^ i think you are referring to runners, and yes, there are lots of post about it in the net that recycle those. Quote
sreichma Posted July 11, 2014 Posted July 11, 2014 The Armored Parts for Ozma arrived this morning.. I gotta say it was quite a painful challenge getting it all together and standing upright! From what I could tell the parts have been used / fitted previously and some things were a little loose and floppy like the top mount missile launcher bays which sit either side of the head. Did a small modification hack to the ball joints in an effort to stiffen them up a bit and they now sit a little better. I swapped out the chest plate inward opening missile bay doors in favor of the outward opening doors as one of the doors was floppy and had some yellow paint spill on the inner side which looked crap.. manufacturing defect I assume? I did manage to scrape some of that paint off but I wont be using it. And the left upper leg section cover for all its worth simply wont fit properly. Its sitting on there ok now but if just doesn't lock in. Yes I did take the intake fan covers off.. All in all Ozma looks totally bad ass! And it all just fits in between the shelves! The upper missile launcher bay doors have about 1mm of room to spare when fully opened.. Clearly Bandai intended these parts to be fitted only when the Valkyrie is on the display stand but as the shelf height on the Klingsbo is much shallower than the the Detolf for example I am unable to have it setup on the stand.. I guess I could remove one of the shelves and put more on them on the stands but I think the display would look shite.. might give it a go in the future who knows.. Also had to rig up a post from a small Minmay figure I had which now supports the weight of the parts from behind. Can't say I like having it there visible but at least Ozma is able to stand up without toppling over. Was a little frustrating to get it all sorted but its done and im happy! For a while there I was thinking stuff it I won't fit the parts but im glad I persisted with it all! Here are some photos.. Like many moments in life, all men remember that singular beauty that comes when they get their first armored 25s DX. Quote
spanner Posted July 11, 2014 Author Posted July 11, 2014 Like many moments in life, all men remember that singular beauty that comes when they get their first armored 25s DX. spoken like a true scholar! I'll admit I have been gazing at Ozma pretty much all day after fitting the armor parts! Quote
KH355hamdi Posted July 11, 2014 Posted July 11, 2014 Spanner. How are the wings holding up with those booster packs? Mine is floppy. At one time I have to use fishing nylon string to keep the wings folded back. The back does fall back due to the weight. Here you can see I prop the back up with Oakley case. They just made RX-78 head as a trophy. Back story knife fight between the two while Michael distract the Gundam from a distance. Lol. Quote
spanner Posted July 11, 2014 Author Posted July 11, 2014 Spanner. How are the wings holding up with those booster packs? Mine is floppy. At one time I have to use fishing nylon string to keep the wings folded back. The back does fall back due to the weight. Here you can see I prop the back up with Oakley case. They just made RX-78 head as a trophy. Back story knife fight between the two while Michael distract the Gundam from a distance. Lol. Its only early days yet but I think I have the rear of Ozma supported pretty well at the moment.. I don't plan on moving Ozma around much if at all so hopefully it won't turn into a floppy mess.. His right upper arm shoulder joint is already a tad on the loose side which is disappointing considering it was a brand new sealed Valk.. I make it a point to not mess around with any of my Valks too much aside from minor display re-positionings or dust cleaning. Hehe!! tell Michael to pull the trigger! Quote
Saburo Posted July 11, 2014 Posted July 11, 2014 Its just left over frame from a model kit.. you know the surround which holds all the bits before you cut them off etc etc.. Cut them down to size and super glued it all together. Easy! That's what I thought it was but just wanted to make sure. Thank spanner Like many moments in life, all men remember that singular beauty that comes when they get their first armored 25s DX. Yes, that's why I took so many pictures of the Armored 25s, so I can remember that moment and so I don't have to transform it to see it in different modes. Quote
gozilham Posted July 6, 2017 Posted July 6, 2017 For VF-25, i prefer the super parts since it have strong and mean look. with tornado part, VF-25 looks heavy... Quote
Loop Posted July 8, 2017 Posted July 8, 2017 On 7/11/2014 at 8:44 AM, Saburo said: That's what I thought it was but just wanted to make sure. Thank spanner Yes, that's why I took so many pictures of the Armored 25s, so I can remember that moment and so I don't have to transform it to see it in different modes. Yep, mine are in fighter mode forever lol, until I remove the armor. I had fun trying the other modes then went back to fighter and never looked back. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.