Delta Posted March 28, 2014 Share Posted March 28, 2014 I'm aware Yamato made some specialized display stands for their VFs but these appear to be long sold out. Just ordered Arcadia's YF-19 and am curious if any particular display stand would well with these things. Preferably a stand that would work in all three modes (the product notes for the 19 indicate that it comes with a stand adapter, assumedly for the old Yamato stands) Quote Link to comment Share on other sites More sharing options...
Mechapilot77 Posted March 28, 2014 Share Posted March 28, 2014 (edited) the new arcadia vf-1s releases both came with a stand...one of the reasons i bought them. other than that, perhaps you can track down a yamato mightyblock (though i don't recommend them). or the bandai hobby action base stands and buy adapaters from shapeways (exo deisgned them, i think you can find them if you do a forum search) that being said i'm not sure either of the last two options (mightyblock or bndai action base) will be sturdy enough to hold a yf-19. there are alwasy flightpose stands as well. Edited March 28, 2014 by Mechapilot77 Quote Link to comment Share on other sites More sharing options...
joppewo Posted March 28, 2014 Share Posted March 28, 2014 You could take a look at Flightpose's display stands which many members of the community are using. I think there have been some complains about paint stripping issues though. Check out this thread: http://www.macrossworld.com/mwf/index.php?showtopic=2159 http://www.hlj.com/product/lftfp-250/Sup http://www.hlj.com/product/lftfp-400/Sup http://www.hlj.com/product/lftfp-250/Sup Quote Link to comment Share on other sites More sharing options...
SuperSenpai Posted March 28, 2014 Share Posted March 28, 2014 The paint stripping issue has been discussed to death on another thread in this forum. My summarized take is: There are some batches that strip paint and some that do not. Some people have had issues, some have not. Buyer beware. The paint stripping is really only an issue for valks that have painted die-cast, as opposed to ones with plastic molded in the color (e.g., Yamato VF-1) on the obvious spots where you would place the rods. The Flightpose stands are the most cost-effective and readily available options out there, not to mention the most flexible. You can display valks in all three modes using the FP stands -- not sure that's the case with any other stand except for the Arcadia stand. So I think it's worth it to at least buy one and check it out to see if you have any problems with it. Quote Link to comment Share on other sites More sharing options...
plastik Posted March 28, 2014 Share Posted March 28, 2014 (edited) I've been using flightpose stands for about a year now. So far no issues with it taking off paint. If you're looking for some flightpose stands I have a set of two 4" stands that I'm selling for $24 shipped in US. paypal gifted.sold to VF1 here are some pics of my setup using flight pose stands. http://www.macrossworld.com/mwf/index.php?showtopic=34339&p=1101887 Edited April 8, 2014 by plastik Quote Link to comment Share on other sites More sharing options...
MILKAUTICO Posted April 3, 2014 Share Posted April 3, 2014 (edited) It would be better to have this display, someone would make if you could? more pics here: http://blog.sina.com.cn/s/blog_a1d5a9100101h6ed.html Edited April 3, 2014 by MILKAUTICO Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 3, 2014 Share Posted April 3, 2014 (edited) I am working on it. imgur gallery Edited April 3, 2014 by ChaoticYeti Quote Link to comment Share on other sites More sharing options...
charger69 Posted April 3, 2014 Share Posted April 3, 2014 Hypnotic! Quote Link to comment Share on other sites More sharing options...
Jasonc Posted April 3, 2014 Share Posted April 3, 2014 I feel like playing a horn to make it dance out of a basket, as I put it in a trance. Quote Link to comment Share on other sites More sharing options...
Froy Posted April 3, 2014 Share Posted April 3, 2014 (edited) Edited April 3, 2014 by Froy Quote Link to comment Share on other sites More sharing options...
Saburo Posted April 3, 2014 Share Posted April 3, 2014 I am working on it. imgur gallery I can't help but stare... this is awesome! Consider it sold! Quote Link to comment Share on other sites More sharing options...
Sildani Posted April 3, 2014 Share Posted April 3, 2014 Uhh.. I was watching that for a good 30 seconds before I caught myself. Want two. Just so you know. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 3, 2014 Share Posted April 3, 2014 I am going to try and figure something out. It may take awhile. Quote Link to comment Share on other sites More sharing options...
Mommar Posted April 3, 2014 Share Posted April 3, 2014 Holy hell, that's awesome. How is it supposed to lock though? Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 3, 2014 Share Posted April 3, 2014 (edited) Holy hell, that's awesome. How is it supposed to lock though? I am using rubber o-rings in each of the joints: \ Edited April 10, 2014 by ChaoticYeti Quote Link to comment Share on other sites More sharing options...
UN Spacy Posted April 3, 2014 Share Posted April 3, 2014 I am working on it. imgur gallery Quote Link to comment Share on other sites More sharing options...
Reïvaj Posted April 3, 2014 Share Posted April 3, 2014 Beautiful job! So you already have the Yamarcadia and Bandai versions! Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 4, 2014 Share Posted April 4, 2014 (edited) Beautiful job! So you already have the Yamarcadia and Bandai versions! Yes. I suppose my definition of "may take awhile" is a little different. Edited April 4, 2014 by ChaoticYeti Quote Link to comment Share on other sites More sharing options...
mechaninac Posted April 4, 2014 Share Posted April 4, 2014 Superb! Only one thing missing on the adjustable arm... a joint that allows for positioning your subject in a banking orientation. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 4, 2014 Share Posted April 4, 2014 (edited) Superb! Only one thing missing on the adjustable arm... a joint that allows for positioning your subject in a banking orientation.Absent on purpose. I may come up with something, but only if I can print it well.Layers would have to print parallel to the axis of motion. This would have the potential to fail over time. Edited April 4, 2014 by ChaoticYeti Quote Link to comment Share on other sites More sharing options...
DyNo Posted April 4, 2014 Share Posted April 4, 2014 Nice display stands! How long does it take to print one? Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 4, 2014 Share Posted April 4, 2014 Nice display stands! How long does it take to print one? About 5 hours. Quote Link to comment Share on other sites More sharing options...
VF-Zer0S Posted April 4, 2014 Share Posted April 4, 2014 Yeah man I'd definitely buy 1 for each of my Valks. Quote Link to comment Share on other sites More sharing options...
charger69 Posted April 4, 2014 Share Posted April 4, 2014 (edited) Give us two products: 1) Only arm pieces for Bandai stands which comes with renewals 2) Complete sets with kite base for Yamato/Arcadia ones!!! Edited April 4, 2014 by charger69 Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 4, 2014 Share Posted April 4, 2014 Give us two products: 1) Only arm pieces for Bandai stands 2) Complete sets with kite base for Yamato/Arcadia ones!!! You want a jointed arm that fits on the Bandai SMS base? Quote Link to comment Share on other sites More sharing options...
Swoosh Posted April 4, 2014 Share Posted April 4, 2014 You want a jointed arm that fits on the Bandai SMS base? That's a great idea, because renewval Bandai SMS is already painted, then a complete Yamato/Arcadia base with Kite logo with looks good together!!! Quote Link to comment Share on other sites More sharing options...
charger69 Posted April 4, 2014 Share Posted April 4, 2014 You want a jointed arm that fits on the Bandai SMS base? Exactly! That's a great idea, because renewval Bandai SMS is already painted, then a complete Yamato/Arcadia base with Kite logo with looks good together!!! Exactly again! Quote Link to comment Share on other sites More sharing options...
Sildani Posted April 4, 2014 Share Posted April 4, 2014 Second that. The SMS base is nifty, it's the arm that lets it down. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 4, 2014 Share Posted April 4, 2014 Second that. The SMS base is nifty, it's the arm that lets it down. Quote Link to comment Share on other sites More sharing options...
Sildani Posted April 4, 2014 Share Posted April 4, 2014 There you go. Problem solved. Quote Link to comment Share on other sites More sharing options...
charger69 Posted April 4, 2014 Share Posted April 4, 2014 Insert shut up and take my money gif here Quote Link to comment Share on other sites More sharing options...
Mommar Posted April 4, 2014 Share Posted April 4, 2014 Holy hell, that's awesome! Quote Link to comment Share on other sites More sharing options...
dapro Posted April 4, 2014 Share Posted April 4, 2014 alright, how much is it? Quote Link to comment Share on other sites More sharing options...
anime52k8 Posted April 4, 2014 Share Posted April 4, 2014 Any chance you could do a fixed height arm that has adjustment for forward/backward as well as side-to-side tilt? I'd like a fighter mode stand with lots of options for climbing, diving and banking angles. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 4, 2014 Share Posted April 4, 2014 (edited) Any chance you could do a fixed height arm that has adjustment for forward/backward as well as side-to-side tilt? I'd like a fighter mode stand with lots of options for climbing, diving and banking angles. Someone else had asked about banking. I could confidently do either or, but not both tilting and banking in one piece. I would have low confidence in a piece like that holding up. I should have something more on that tonight. Edit: Edited April 5, 2014 by ChaoticYeti Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.