Jump to content

Recommended Posts

Posted
  On 3/16/2020 at 7:46 PM, Lolicon said:

Yeah the exchange rate sucks right now. I'm hesitant to order anything currently. My next round of POs to pay for won't be till late April, so I'm hoping the exchange improves by then.

Expand  

I have a few orders at NY with April 1 payment due dates so I'm going to wait it out and hope it gets better by then. Of course, it could get a lot worse but I'll take that risk.

Posted
  On 3/16/2020 at 7:47 PM, jenius said:

Man, I can't remember the last time I had this little PO'ed. 

Expand  

I bet!  My problem is that I'll start trying to catch up on missed things and wind up paying the go-back-in-time tax (a.k.a. Aftermarket Markup).  I had no interest in the Arcadia Zero stuff and then BAM. A PF 0S, SV-51, and PO for PF 0D later...  At least I snagged a PO for 0D and won't be paying the markup for that but sheesh it's expensive enough on its own.

Posted
  On 3/16/2020 at 7:48 PM, Lolicon said:

Heck, those April POs might be delayed, since all that stuff is (like those MB Zakus) are built in China.

Expand  

Yeah, but we all know NY isn't going to care about that. When they give you a payment date, you gotta pay or risk losing your order. Fine with me though.

  On 3/16/2020 at 7:57 PM, DYRL VF-1S said:

I bet!  My problem is that I'll start trying to catch up on missed things and wind up paying the go-back-in-time tax (a.k.a. Aftermarket Markup).  I had no interest in the Arcadia Zero stuff and then BAM. A PF 0S, SV-51, and PO for PF 0D later...  At least I snagged a PO for 0D and won't be paying the markup for that but sheesh it's expensive enough on its own.

Expand  

Haha, yeah these Zero Valks are bank! It's a bit insane that I am willing to pay the price they ask for a single figure with little to no second thought about it.

Posted
  On 3/16/2020 at 7:47 PM, jenius said:

Man, I can't remember the last time I had this little PO'ed. 

Expand  

Yeah, it's looking like I might actually be able to get a new computer. The one I'm using was last updated in 2012, and the PSU case and HDD are from 2007.

Posted
  On 3/16/2020 at 7:57 PM, DYRL VF-1S said:

I bet!  My problem is that I'll start trying to catch up on missed things and wind up paying the go-back-in-time tax (a.k.a. Aftermarket Markup).  I had no interest in the Arcadia Zero stuff and then BAM. A PF 0S, SV-51, and PO for PF 0D later...  At least I snagged a PO for 0D and won't be paying the markup for that but sheesh it's expensive enough on its own.

Expand  

Yep. Unlike Yamato, Arcadia wants to stay in business, so we get only a few releases in small batches, and if you miss out, they get super expensive on the secondary market. So it's not unlike Bandai releases, except the original starting price is much higher. :wacko:

Posted
  On 3/16/2020 at 8:01 PM, Slave IV said:

Haha, yeah these Zero Valks are bank! It's a bit insane that I am willing to pay the price they ask for a single figure with little to no second thought about it.

Expand  

 

  On 3/16/2020 at 8:11 PM, Lolicon said:

Yep. Unlike Yamato, Arcadia wants to stay in business, so we get only a few releases in small batches, and if you miss out, they get super expensive on the secondary market. So it's not unlike Bandai releases, except the original starting price is much higher. 

Expand  

Haha...man that seems to be the case for sure!  I won't be lagging in the future.  Thankfully, I was able to still snag SV-51 at MSRP because of the whole leg mishap.  A few of the shops restocked with corrected Valks in box.  And then on the 0S, I only paid like a $30 - $40 markup IIRC using my Tenso address on AJ.  And part of that markup was due to Tenso's ridiculous shipping. (Worse than NY using EMS.)  I have to say that after receiving those two, I'm pretty stoked about this 0D.

Posted
  On 3/16/2020 at 8:20 PM, DYRL VF-1S said:

Haha...man that seems to be the case for sure!  I won't be lagging in the future.  Thankfully, I was able to still snag SV-51 at MSRP because of the whole leg mishap.  A few of the shops restocked with corrected Valks in box.  And then on the 0S, I only paid like a $30 - $40 markup IIRC using my Tenso address on AJ.  And part of that markup was due to Tenso's ridiculous shipping. (Worse than NY using EMS.)  I have to say that after receiving those two, I'm pretty stoked about this 0D.

Expand  

Yeah I really look forward to the 0D, whenever that may be. And the VF-4 after that. Might be awhile as China's economy got crushed by this pandemic and is only slowly recovering.

Posted

The SV-51 from Arcadia is still running at or even below MSRP. Same for the VF-1J Milia. Max can be found at MSRP. I think we just recently got through the retail stocks of the SDF-1 and VF-0S.

Posted
  On 3/16/2020 at 8:28 PM, Lolicon said:

Yeah I really look forward to the 0D, whenever that may be. And the VF-4 after that. Might be awhile as China's economy got crushed by this pandemic and is only slowly recovering.

Expand  

Yeah and let's hope the economies around the world hold up.  I don't even want to look at stock in the States.  But I'll do my part in the economy by buying Valks and Vinyl!  I live by the two "V's"!

Posted (edited)
  On 3/16/2020 at 9:55 PM, DYRL VF-1S said:

Do you have a store out in Cali that I can support?

Expand  

Which one do you need? I know a few webstores that I have used which have them available.

 

Only one local store to me, and they were asking almost $300 for the HMR Monster, so I don't think I'd buy from them.

Edited by Sanity is Optional
Posted
  On 3/16/2020 at 10:21 PM, Sanity is Optional said:

Which one do you need? I know a few webstores that I have used which have them available.

 

Only one local store to me, and they were asking almost $300 for the HMR Monster, so I don't think I'd buy from them.

Expand  

Ahh gotcha I read your post wrong. For some reason I thought you owned a store:D I was all about supporting you! 

Posted (edited)
  On 3/17/2020 at 3:16 AM, jeniusornome said:

@Sanity is Optional there are places that still have retail stock of sdf-1 and the vf-0s?

Expand  

As of last month I saw the VF-0 available at HLJ, and I think the SDF-1 only finally went away a bit before that.

 

Right now they have normal and PF max/milia, VF-0 reactive armor, SV-51, and VE-1.

Edited by Sanity is Optional
Posted
  On 3/17/2020 at 8:42 PM, Mommar said:

The mistake was having them over there at all.

Expand  

Not many other options. Arcadia doesn't have the volume or expertise to do in-house manufacturing. It was always going to get outsourced production. There's only so many countries to outsource it to.

Posted
  On 3/17/2020 at 8:56 PM, Lolicon said:

I'd like to hear where he proposes Arcadia should have sourced the manufacturing and assembly to.

Expand  

Me too.

I outsource some items to China. I don't want to but I either can't find a producer period. Or, I can't find a producer that can do it less than 4x what I can get it in China for.

  • 2 weeks later...
Posted
  On 3/31/2020 at 1:54 AM, spanner said:

This one is due for release today but do we know if that's still happening?

Expand  
  Quote

Regarding "1/60 Perfectly Deformed VF-0D Phoenix Premium Finish", which is scheduled to be released this March, there has been
a significant delay in production at the factory due to the influence of the new coronavirus.

As a result, we have decided to postpone the release with great regret.
Please refer to the following for details.

-------------------------------------------------- ---
・ Product name: 1/60 Perfectly deformed VF-0D Phoenix Premium Finish
・ Scheduled to be released: [March 2020] → To be determined (factory and schedule are being adjusted)
----------- ------------------------------------------

Expand  

 

https://arcadia.ac/

Posted

that's somewhat expected though not having a new date is a bummer. Hopefully N-Y (where I ordered) is alive by then as it seems there's a number of PP claims/chargebacks from their customers the past few months due to their logistics issue (specifically in Europe).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...