MacrossJunkie Posted March 31, 2014 Share Posted March 31, 2014 Actually, the VF-0D is the same overall length, nose included. It's just that components are shifted around similar to the way the VT-1 is, and the canopy is a little closer to the nosecone than on the A or S. They might have to push the heatshield closer to the cockpit to make it longer. If the intake fins are molded in one piece with them, I don't think I'm too concerned about their strength. They obviously won't take any kind of drop well, but they'll probably be fine as long as you don't leave pressure on them. If you keep the gunpod loaded, it might keep them from even touching on a flat surface. I wasn't speaking of the fighter length. And yes, the parts are shifted a bit like the VF-1D and other double seaters. The heatshield is definitely a bit longer and chest piece is up higher and shows the LERX underneath whereas they are hidden by the chest piece on the A and S variants. That has caused the torso to look a bit longer compared to the A or S toys which look comparatively wider. Quote Link to comment Share on other sites More sharing options...
EXO Posted April 1, 2014 Share Posted April 1, 2014 http://www.macrossworld.com/6342/arcadia-vf-0d-project-on-indefinite-hold/ Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted April 1, 2014 Share Posted April 1, 2014 (edited) it's not true right right???? btw, that's messed up!!! Edited April 1, 2014 by davidwhangchoi Quote Link to comment Share on other sites More sharing options...
Vifam7 Posted April 1, 2014 Share Posted April 1, 2014 http://www.macrossworld.com/6342/arcadia-vf-0d-project-on-indefinite-hold/ Almost had me believing... but then i remembered today's date. Quote Link to comment Share on other sites More sharing options...
Reïvaj Posted April 1, 2014 Share Posted April 1, 2014 http://www.macrossworld.com/6342/arcadia-vf-0d-project-on-indefinite-hold/ :lol: !!! Quote Link to comment Share on other sites More sharing options...
Gatillero PR Posted April 1, 2014 Share Posted April 1, 2014 April fools... I hope Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 1, 2014 Share Posted April 1, 2014 I hate the internet on April 1st. Quote Link to comment Share on other sites More sharing options...
anime52k8 Posted April 1, 2014 Share Posted April 1, 2014 http://www.macrossworld.com/6342/arcadia-vf-0d-project-on-indefinite-hold/ honestly, the 1/60 Glaug prank was much better executed. Quote Link to comment Share on other sites More sharing options...
wm cheng Posted April 1, 2014 Share Posted April 1, 2014 You know April Fools ends at noon right?! Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted April 1, 2014 Share Posted April 1, 2014 Folks, please calm down. the CAD for this is FAR from final. Save and I spoke with Mr.K directly at Wonderfest and most of the points that you have expressed concern about are things that he is well aware of and that are currently still being decided upon. He is also aware of the Phenix misspelling. The man is a professional and knows his stuff, as do those who work with him. Suddenly throwing English Tweets or emails at him when the poor guy doesnt speak a word of English doesn't help anyone. Everyone's passion and enthusiasm is appreciated - it's what keeps new toys like this being produced. But tempering it with some patience and cultural understanding helps. i blame you if some guys go on Mr. K's twitter and start panicking Quote Link to comment Share on other sites More sharing options...
505thAirborne Posted April 1, 2014 Share Posted April 1, 2014 (edited) I saw this on FB and thought for a few seconds "Oh Sh-t".... Then I remembered, its April 1st! Edited April 2, 2014 by 505thAirborne Quote Link to comment Share on other sites More sharing options...
EXO Posted April 1, 2014 Share Posted April 1, 2014 honestly, the 1/60 Glaug prank was much better executed. That was a classic. But that one we had a week to do... We just remembered that it was April 1st yesterday. You know April Fools ends at noon right?! It was posted before and they seemed pretty obvious... Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted April 1, 2014 Share Posted April 1, 2014 That was a classic. But that one we had a week to do... We just remembered that it was April 1st yesterday. *I* was well aware earlier. . (even came up with something but never got around to it---maybe save it for next year) Quote Link to comment Share on other sites More sharing options...
xrentonx Posted April 1, 2014 Share Posted April 1, 2014 (edited) ...whew...so happy it's April 1st! Had me worried for a few seconds! Edited April 1, 2014 by xrentonx Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted April 2, 2014 Share Posted April 2, 2014 Ha. Ha. Ha. But for reals, if you'd posted a SRP of 50,000 JPY vs. a cancellation some of the members here would have burned this place down. -b. Quote Link to comment Share on other sites More sharing options...
dizman Posted April 2, 2014 Share Posted April 2, 2014 MW has a homepage? When did that happen? Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted April 2, 2014 Share Posted April 2, 2014 MW has a homepage? When did that happen? It only goes live for special occasions and announcements. -b. Quote Link to comment Share on other sites More sharing options...
xrentonx Posted April 2, 2014 Share Posted April 2, 2014 MW has a homepage? When did that happen? Hard to recognize when you're so used to the Geocities-esque charm of the old one, right? Quote Link to comment Share on other sites More sharing options...
Swoosh Posted April 2, 2014 Share Posted April 2, 2014 Thank's to OTM, MW even has a FB fan page !!!! Quote Link to comment Share on other sites More sharing options...
warrhead Posted April 2, 2014 Share Posted April 2, 2014 (edited) On the topic of the images posted for April fool's, is that a VF-9 Cutlass to the lower left of that pink bass guitar? Edit: it's close, but there are differences... what is that? Edited April 2, 2014 by warrhead Quote Link to comment Share on other sites More sharing options...
close313 Posted April 2, 2014 Share Posted April 2, 2014 On the topic of the images posted for April fool's, is that a VF-9 Cutlass to the lower left of that pink bass guitar? Edit: it's close, but there are differences... what is that? It's the red coloured prototype of the YF-19 Quote Link to comment Share on other sites More sharing options...
warrhead Posted April 2, 2014 Share Posted April 2, 2014 No, to the right of that. The unpainted, light beige one. Quote Link to comment Share on other sites More sharing options...
EXO Posted April 2, 2014 Share Posted April 2, 2014 Those are all YF-19s prototypes. There should be larger images of them during the Wonder Fest posts. Quote Link to comment Share on other sites More sharing options...
eyesonme78 Posted April 5, 2014 Share Posted April 5, 2014 I hope the design will be as good as the arcadia YF-19 Quote Link to comment Share on other sites More sharing options...
mechaninac Posted April 5, 2014 Share Posted April 5, 2014 I hope it's better... Quote Link to comment Share on other sites More sharing options...
anime52k8 Posted April 5, 2014 Share Posted April 5, 2014 I'm sure someone will find something to complain about either way. Quote Link to comment Share on other sites More sharing options...
Reïvaj Posted April 6, 2014 Share Posted April 6, 2014 ! Very true! Quote Link to comment Share on other sites More sharing options...
Scream Man Posted April 6, 2014 Share Posted April 6, 2014 It's the Macrossworld way! Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted April 6, 2014 Share Posted April 6, 2014 (edited) only 2-3 guys i know that would complain right off the bat even during prototype stages, you know what i learned? they end up making very important points that are legit issues after seeing the 19. (minus the comments of colors of a photo or on a poster before a prototype is shown and all that banter) Edited April 6, 2014 by davidwhangchoi Quote Link to comment Share on other sites More sharing options...
1/1 LowViz Lurker Posted April 6, 2014 Share Posted April 6, 2014 (edited) I hope they listen to the valid complaints. Sometimes they ignore it. eg It took them ages to give us the side parts (to be accurate to the anime) on vf-1 1/60 version 2 toys as standard despite vf-19 getting special covers to neaten up robot mode etc. It's not hard for them to include considering they give us intake covers and other things like adapter parts for stands on toys. ....But they finally did it after so long. "The squeeky wheel gets the oil" as they say. If you don't complain, how can they improve? Edited April 6, 2014 by 1/1 LowViz Lurker Quote Link to comment Share on other sites More sharing options...
Mommar Posted April 6, 2014 Share Posted April 6, 2014 I'm worried about the ankles. While still considering what to do with this broken 19 I decided to put it in Battroid after doing all of the extreme stuff in Gerwalk. Yeah, those ankles still f**king suck. It can't stand straight up now. If the 0D has some idiot ball joints like this thing it'll suck as well. Somebody with knowledge of Japanese needs to post on the Arcadia feed that the 19's ankles blow and not to screw it up on the 0D as well. Quote Link to comment Share on other sites More sharing options...
1/1 LowViz Lurker Posted April 6, 2014 Share Posted April 6, 2014 Yep balljoints suck for big toys. They are fine for smaller action figures and things but they loosen over time when the friction is lost. Quote Link to comment Share on other sites More sharing options...
Isamu Dyson Posted April 7, 2014 Share Posted April 7, 2014 I'm worried about the ankles. While still considering what to do with this broken 19 I decided to put it in Battroid after doing all of the extreme stuff in Gerwalk. Yeah, those ankles still f**king suck. It can't stand straight up now. If the 0D has some idiot ball joints like this thing it'll suck as well. Somebody with knowledge of Japanese needs to post on the Arcadia feed that the 19's ankles blow and not to screw it up on the 0D as well. Arcadia already knows the ball joint problem. Kawamori also stated he was aware of it when working on the YF-19. The funny thing is he didn't say anything much aside from that. So I'm not really hoping for much. Working with Japanese staff every day, I've come to realize knowing a problem and fixing a problem are two very different things. We won't fix a leak until it floods. No wonder Samsung owns Sony nowadays. Personally for me, I rather sacrifice the lack of mobility and range on my valk's ankles than to have it flop over. Also the look of a ball joint makes my valks look far from the original design. I have no idea why they went with the ball joint again with the YF-19 and it wouldn't surprise me if the 0D has it. Quote Link to comment Share on other sites More sharing options...
Mommar Posted April 7, 2014 Share Posted April 7, 2014 Arcadia already knows the ball joint problem. Kawamori also stated he was aware of it when working on the YF-19. The funny thing is he didn't say anything much aside from that. So I'm not really hoping for much. Working with Japanese staff every day, I've come to realize knowing a problem and fixing a problem are two very different things. We won't fix a leak until it floods. No wonder Samsung owns Sony nowadays. Personally for me, I rather sacrifice the lack of mobility and range on my valk's ankles than to have it flop over. Also the look of a ball joint makes my valks look far from the original design. I have no idea why they went with the ball joint again with the YF-19 and it wouldn't surprise me if the 0D has it. It's obvious that skinny joint in the leg makes more room for the additional hidden missile and landing gear. However, the design is awful. In another thread anime52k8 pretty much explained why the Arcadia/Yamato one sucks and it's a relatively simple fix to make them work like the Bandai ankles, which work SO MUCH better. Quote Link to comment Share on other sites More sharing options...
Scyla Posted April 7, 2014 Share Posted April 7, 2014 Is there any reason why the feet will differ from the VF-1 approach. The VF-0 has similar feet that are different than the one from the YF-19. Why shouldn't Arcadia use ratchet joints? Also the legs don't have a missile compartment like the Excalibur has. Maybe I'm wrong but this makes more sense to me than to use these awful ball-joints. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.