DYRL VF-1S Posted March 21, 2020 Share Posted March 21, 2020 1 minute ago, sqidd said: It's kinda in flux right now. I'm not happy with the entire presentation. I need to put some more lights and white backing in one cab (black right now). Lights in a Detolf. A few shelves (Macross Zero) are a bit bare because I left room for three VF-0D's. And I have a VF-0S with Armor to unbox. The Plus shelves are a little weenie. One more YF-19 for Gerwalk to go there and hopefully some Bandai DX 21's. Come to think of it I think I have 8-9 valks to un-box still. And 4-5 Primes. First world problems I suppose. I've got a box full of YetiStands to set up too. I'm getting tired just thinking about it! I've been slammed trying to get my new web site done. I'd rather have a sharp stick in the eye. Like a boss Link to comment Share on other sites More sharing options...
sqidd Posted March 21, 2020 Share Posted March 21, 2020 I just realized I was tricked into posting these in this thread. I thought I was in the display thread. Heading over there now. Link to comment Share on other sites More sharing options...
Bobby Posted March 21, 2020 Share Posted March 21, 2020 Just snapped this pic last night... Link to comment Share on other sites More sharing options...
vlenhoff Posted March 21, 2020 Share Posted March 21, 2020 ^ ^ ^ Very cool picture! ^ ^ ^ The latest addition to my display. Good ol' Hikkie's VF-1J. I wonder whyis this the only HMR with a blue canopy... I wish it was clear, like the others. Thanks @no3Ljm Link to comment Share on other sites More sharing options...
Bub Posted March 22, 2020 Share Posted March 22, 2020 Experimentation? Testing to see if it cheaper material would sell and still look good? Link to comment Share on other sites More sharing options...
Sanity is Optional Posted March 22, 2020 Share Posted March 22, 2020 Just got in a PG Perfect Strike from USA Gundam Store. Good timing, what with working from home until early April. Link to comment Share on other sites More sharing options...
Chronocidal Posted March 22, 2020 Share Posted March 22, 2020 On 3/20/2020 at 9:29 PM, vlenhoff said: ^ ^ ^ Very cool picture! ^ ^ ^ The latest addition to my display. Good ol' Hikkie's VF-1J. I wonder whyis this the only HMR with a blue canopy... I wish it was clear, like the others. Thanks @no3Ljm I specifically bought extras of the VF-1A CF so I'd have clear canopies to swap in. I figure as long as I keep them in battroid, I never have to use the blue ones. Link to comment Share on other sites More sharing options...
borgified Posted March 23, 2020 Share Posted March 23, 2020 This might be of use to those that are taking measures in this worldwide condition, and I thought this might be appropriate here as we're getting our toy fixes in one way or another. Knowing that the risk of catching the virus via packages is very unlikely, here's an article that be worth reading from Huffingpost Canada. https://www.huffingtonpost.ca/entry/cleaning-packages-delivery-coronavirus_ca_5e72459cc5b6f5b7c53c995f?utm_hp_ref=ca-coronavirus As a well known adage goes; "Rather be safe than sorry". Link to comment Share on other sites More sharing options...
sh9000 Posted March 23, 2020 Share Posted March 23, 2020 @vlenhoff If you need a HMR clear canopy, then let me know. I have spares. Link to comment Share on other sites More sharing options...
sqidd Posted March 23, 2020 Share Posted March 23, 2020 6 hours ago, borgified said: This might be of use to those that are taking measures in this worldwide condition, and I thought this might be appropriate here as we're getting our toy fixes in one way or another. Knowing that the risk of catching the virus via packages is very unlikely, here's an article that be worth reading from Huffingpost Canada. https://www.huffingtonpost.ca/entry/cleaning-packages-delivery-coronavirus_ca_5e72459cc5b6f5b7c53c995f?utm_hp_ref=ca-coronavirus As a well known adage goes; "Rather be safe than sorry". I've been doing this since December-ish??? At least with things from Asia. Now with everything. I have a couple of these sprayers for the shop: https://www.amazon.com/Solo-418-2L-Ergonomic-Gardening-Fertilizing/dp/B004XV2OQU/ref=sr_1_7?dchild=1&keywords=solo+hand+pressure+sprayer&qid=1584957321&sr=8-7 And I fill them with denatured alcohol from Lowe's. You can buy a gallon for something like $18. It lasts forever. I use it to clean components. Works great for boxes too. Put on a pair of disposable rubber gloves, hose down the package outside, open it up, light spray of what is inside or wipe down with a damp paper towel. Then everything goes in the trash. Link to comment Share on other sites More sharing options...
sh9000 Posted March 23, 2020 Share Posted March 23, 2020 Marvel Legends Red Hulk. Link to comment Share on other sites More sharing options...
vlenhoff Posted March 24, 2020 Share Posted March 24, 2020 (edited) double post entertainment, mmm, post... Edited March 24, 2020 by vlenhoff Link to comment Share on other sites More sharing options...
vlenhoff Posted March 24, 2020 Share Posted March 24, 2020 21 hours ago, sh9000 said: @vlenhoff If you need a HMR clear canopy, then let me know. I have spares. Yes please! I can send you the blue one if you like. It can wait though. I don't want you to go to the post office in this period of social distancing. I do want one though. In the mean time, i'll just keep him in battloid mode. @Chronocidal I am pretty sure that's @sh9000 did too. I really want more brownies in my future. Link to comment Share on other sites More sharing options...
sh9000 Posted March 24, 2020 Share Posted March 24, 2020 9 hours ago, vlenhoff said: double post entertainment, mmm, post... Dude! Sweet! 9 hours ago, vlenhoff said: Yes please! I can send you the blue one if you like. It can wait though. I don't want you to go to the post office in this period of social distancing. I do want one though. In the mean time, i'll just keep him in battloid mode. @Chronocidal I am pretty sure that's @sh9000 did too. I really want more brownies in my future. No problem. Yeah I checked and I have at least one canopy to spare from one of the Armored Valkyries that I’ll be leaving in Battroid mode. Link to comment Share on other sites More sharing options...
vlenhoff Posted March 24, 2020 Share Posted March 24, 2020 6 hours ago, sh9000 said: Dude! Sweet! No problem. Yeah I checked and I have at least one canopy to spare from one of the Armored Valkyries that I’ll be leaving in Battroid mode. Awesome, lets do it when all this covid-19 dies down, if you agree. It might be some considerable time later, but safety is always first. Link to comment Share on other sites More sharing options...
Mommar Posted March 24, 2020 Share Posted March 24, 2020 Snake Eyes showed up today. Link to comment Share on other sites More sharing options...
Lolicon Posted March 24, 2020 Share Posted March 24, 2020 On 3/19/2020 at 4:40 PM, sqidd said: The custom painted Matchbox SDF-1 is in the house! Love that custom SDF-1. Been kicking around the idea to do the same with mine as it's yellowed over the years. Link to comment Share on other sites More sharing options...
sqidd Posted March 24, 2020 Share Posted March 24, 2020 8 minutes ago, Lolicon said: Love that custom SDF-1. Been kicking around the idea to do the same with mine as it's yellowed over the years. If I had the skills/time I would have painted the other one I have. The difference between them when next to each other is astounding. Do it! Link to comment Share on other sites More sharing options...
sqidd Posted March 24, 2020 Share Posted March 24, 2020 I just got this. Who has one of these Medicom RAH EVA02's? Is yours a floppy mess? This thing is HORRIBLE. If I look at it sideways it crumbles. This is about the only pose I can do with it. The Unit 01 I have is fine/tight. This was supposed to be MISB but the seal was popped. I'm wondering if I got screwed. Or if they're all a mess. And the white armor/band around the abdomen isn't attached at all. Looks cool though . Link to comment Share on other sites More sharing options...
Slave IV Posted March 24, 2020 Share Posted March 24, 2020 33 minutes ago, sqidd said: I just got this. Who has one of these Medicom RAH EVA02's? Is yours a floppy mess? This thing is HORRIBLE. If I look at it sideways it crumbles. This is about the only pose I can do with it. The Unit 01 I have is fine/tight. This was supposed to be MISB but the seal was popped. I'm wondering if I got screwed. Or if they're all a mess. And the white armor/band around the abdomen isn't attached at all. Looks cool though . I don't have those but Medicom has very spotty QC. Their figures can range from sloppy junk to some of the best out there. If it's just loose joints, you can use Future or some other acrylic polish to tighten them up. I did just order some of the latest EVA figures Bandai made for their Robot Damashii line, which is generally very good so will see how that goes. Link to comment Share on other sites More sharing options...
sqidd Posted March 24, 2020 Share Posted March 24, 2020 Just now, Slave IV said: I don't have those but Medicom has very spotty QC. Their figures can range from sloppy junk to some of the best out there. That would explain it. It looks new. But it's a flippin mess. The pose in that pic isn't too bad. Oh well. You win some you lose some. Good thing the shelf is too short for them to stand up. Then I would be really frustrated. THX Link to comment Share on other sites More sharing options...
Slave IV Posted March 24, 2020 Share Posted March 24, 2020 1 minute ago, sqidd said: That would explain it. It looks new. But it's a flippin mess. The pose in that pic isn't too bad. Oh well. You win some you lose some. Good thing the shelf is too short for them to stand up. Then I would be really frustrated. THX No problem! I'm glad I'm happy with the Metal Build EVAs for my Evangelion needs. Those figures are excellent all around and yes, I'm fine with the look even though they are not OG designs...to me, they look better and that's what matters. I ordered the Robot Damashii ones to have as somewhat in scale adversaries for my SHMA Godzilla figures and especially to go with Riobot NERV Anti-G. Link to comment Share on other sites More sharing options...
sqidd Posted March 24, 2020 Share Posted March 24, 2020 2 minutes ago, Slave IV said: No problem! I'm glad I'm happy with the Metal Build EVAs for my Evangelion needs. Those figures are excellent all around and yes, I'm fine with the look even though they are not OG designs...to me, they look better and that's what matters. I ordered the Robot Damashii ones to have as somewhat in scale adversaries for my SHMA Godzilla figures and especially to go with Riobot NERV Anti-G. I've got the MB EVA's. I like them. But in a different way than the toon accurate ones. I'm coming to find as I'm getting to the end of my available display space that my priorities are morphing. It's not so much about the size of the collection, it's the quality (or quality to me). I'm falling out of love with the MB stuff because of the scale. They take up nearly the same shelf space as a 10-12" figure does without the impact of something bigger. My opinion of course. I may be jettisoning some MB stuff in the future. Link to comment Share on other sites More sharing options...
Slave IV Posted March 25, 2020 Share Posted March 25, 2020 1 hour ago, sqidd said: I've got the MB EVA's. I like them. But in a different way than the toon accurate ones. I'm coming to find as I'm getting to the end of my available display space that my priorities are morphing. It's not so much about the size of the collection, it's the quality (or quality to me). I'm falling out of love with the MB stuff because of the scale. They take up nearly the same shelf space as a 10-12" figure does without the impact of something bigger. My opinion of course. I may be jettisoning some MB stuff in the future. Yeah, I'm not a big MB collector and ironically, I have the non-gundam releases like the Mazingers and Evas...and I love those. There is no way I'm going to collect a bunch of Gundam MBs though....unless they do G Gundam. Then I'm fv(ked! LOL! Link to comment Share on other sites More sharing options...
sh9000 Posted March 25, 2020 Share Posted March 25, 2020 Link to comment Share on other sites More sharing options...
Lolicon Posted March 26, 2020 Share Posted March 26, 2020 New stuff day. Picked up another Hot Toys Iron Man suit. And another Sheryl figure. But most importantly, I think I have a new favorite T-shirt. Link to comment Share on other sites More sharing options...
Bolt Posted March 26, 2020 Share Posted March 26, 2020 Awesome shirt @Lolicon ! The nostalgia shirt is very cool @sh9000 Link to comment Share on other sites More sharing options...
sh9000 Posted March 26, 2020 Share Posted March 26, 2020 11 minutes ago, Bolt said: The nostalgia shirt is very cool @sh9000 Thanks. Link to comment Share on other sites More sharing options...
Lolicon Posted March 26, 2020 Share Posted March 26, 2020 15 minutes ago, Bolt said: Awesome shirt @Lolicon ! Thanks. Can't wait to slum it up in Tokyo with it on. Link to comment Share on other sites More sharing options...
sh9000 Posted March 26, 2020 Share Posted March 26, 2020 Ordered another Marvel Legends Stan Lee for $0.24 shipped. That’s damn cheap to use the body for a custom. I’ll either make an updated 6” scale Michael Knight to go with my 6” scale KITT or make a Scott Summers in civilian clothes. Link to comment Share on other sites More sharing options...
Lolicon Posted March 26, 2020 Share Posted March 26, 2020 I wonder if there are more T-shirts like that... Link to comment Share on other sites More sharing options...
Bolt Posted March 26, 2020 Share Posted March 26, 2020 I really want a Ranka Lee! May have to guerrilla print my own.. Link to comment Share on other sites More sharing options...
sh9000 Posted March 27, 2020 Share Posted March 27, 2020 Hot Wheels Big Foot and KITT SPM. GI Joe Classified 6” Snake Eyes. Link to comment Share on other sites More sharing options...
scand Posted March 28, 2020 Share Posted March 28, 2020 Since I'm going to be waiting another umpteen months for Shin's VF-0D, Figured I would splurge a little on A Frontier Valk. This is my first one, I like it much more that I do my only Delta Valk. Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted March 28, 2020 Share Posted March 28, 2020 Picked up some canon fodder for under $100 on Manda. Other than the box being a little worn this thing is near mint. Link to comment Share on other sites More sharing options...
Recommended Posts