Jump to content

Recommended Posts

Posted

Finally got my new head in for TE-01 Optimus, somehow making an excellent figure even better, pretty perfect. Masterpiece Transformer of the year for me so far, even over MP Beast Wars Megatron, this thing is amazing, picture perfect G1 cartoon Optimus.

IMG_20190522_175754825.thumb.jpg.bf67ac4591dac719f634f10b4a0b03d6.jpg

IMG_20190522_180121082.thumb.jpg.e42b568af48bf289026549eaac572d07.jpg

IMG_20190522_180955809.thumb.jpg.8dc26564c4bfecf53acca79468b0563f.jpg

Posted (edited)

The diecast 1/100 F-117 is becoming one of my favorites.  It didn’t come with a pilot but the bottom can open to get to the inside.  I’ll probably put a spare HMR CF TV pilot in the seat.

Edited by sh9000
Posted
3 hours ago, Tking22 said:

Finally got my new head in for TE-01 Optimus, somehow making an excellent figure even better, pretty perfect. Masterpiece Transformer of the year for me so far, even over MP Beast Wars Megatron, this thing is amazing, picture perfect G1 cartoon Optimus.

IMG_20190522_175754825.thumb.jpg.bf67ac4591dac719f634f10b4a0b03d6.jpg

IMG_20190522_180121082.thumb.jpg.e42b568af48bf289026549eaac572d07.jpg

IMG_20190522_180955809.thumb.jpg.8dc26564c4bfecf53acca79468b0563f.jpg

I loved the look of the TE-01 in bot mode and ordered it without hesitation. Have had it in hand for about a week, but transformed it for the first time just now. The transformation design is bloody amazing. Perfect alt mode with even fewer gaps than the MP-10, and an even slimmer trailer section. These guys at TE know what they are doing and wowed the market with this debut. Can’t wait for more of their designs in the future. 

 

9C34BF6C-1D04-4233-8F3D-A6733B5467FE.jpeg

Posted (edited)

New arrivals. Bypassed our postal services so they came quickly (and didn't get stolen).

 Hasbro TIE Fighter and Disney Tron and Sark.

20190522_202338.jpg

tieandhisboy.jpg

cockpit.jpg

20190522_201748.jpg

 

 


 

dieplaying.jpg

betterthanyou.jpg

dontloseyouriddisc.jpg

Edited by Podtastic
Posted
4 hours ago, rdrunner said:

I loved the look of the TE-01 in bot mode and ordered it without hesitation. Have had it in hand for about a week, but transformed it for the first time just now. The transformation design is bloody amazing. Perfect alt mode with even fewer gaps than the MP-10, and an even slimmer trailer section. These guys at TE know what they are doing and wowed the market with this debut. Can’t wait for more of their designs in the future. 

 

9C34BF6C-1D04-4233-8F3D-A6733B5467FE.jpeg

Yeah I onky have year of the goat trailer so the transparent one but I do love the transformation

7 hours ago, Tking22 said:

Finally got my new head in for TE-01 Optimus, somehow making an excellent figure even better, pretty perfect. Masterpiece Transformer of the year for me so far, even over MP Beast Wars Megatron, this thing is amazing, picture perfect G1 cartoon Optimus.

IMG_20190522_175754825.thumb.jpg.bf67ac4591dac719f634f10b4a0b03d6.jpg

IMG_20190522_180121082.thumb.jpg.e42b568af48bf289026549eaac572d07.jpg

IMG_20190522_180955809.thumb.jpg.8dc26564c4bfecf53acca79468b0563f.jpg

 

16 hours ago, Tking22 said:

TE-01 is a brilliant figure, MP of the year so far for me. Agreed, MP-44 pricing is absurd, even at the Amazon Japan price of roughly $300+, that's too much. TE-01 isn't really based on MP-44, it's just based on toon/movie Optimus, which MP-44 is as well, so they both look incredibly similar. If you're interested, check out TFW2005 for member Jream, he makes a cheap, but very nice little vinyl add-on set, covers for the exposed silver bits on the sides of the legs, and vinyl covers for the chest, two shades of blue and a toon centric cartoon window version as well, in one bundle, for like $10 shipped.

Ah so that's what the vinyl covers look like, good tip might do that then 

 

Posted

CDJapan has the 1/100 F-14D and F-15C available so I ordered them both just now.

Posted
7 hours ago, sh9000 said:

CDJapan has the 1/100 F-14D and F-15C available so I ordered them both just now.

Oh man, I want an F-14D! I would have bit if it was this deco:

f-14d_vf101cag_rt.jpg

Posted
7 hours ago, Slave IV said:

Oh man, I want an F-14D! I would have bit if it was this deco:

f-14d_vf101cag_rt.jpg

That deco looks nice.  Maybe they’ll come out with that one later.

66E71665-6C98-4C61-9AAC-41E19016DB49.thumb.jpeg.e57c957a6dda387b76e694c6ca7afa90.jpeg

Got my HMR VF-4 x6.

0DB0B224-0C87-4E09-89A9-58A4BB262252.thumb.jpeg.046d0145198a4c9f55fec69e7213f0dd.jpeg

Marvel Legends Jubilee x3.  One came free.

FFCD54EE-FBD2-4912-A1FB-279753A50C4C.thumb.jpeg.41bad78c3d82b5fbcb005ae615aabc17.jpeg

Marvel Legends Kitty Pryde.

Posted
17 hours ago, Podtastic said:

New arrivals. Bypassed our postal services so they came quickly (and didn't get stolen).

 Hasbro TIE Fighter and Disney Tron and Sark.

 

tieandhisboy.jpg

cockpit.jpg

 

That's one sweet Tie!

Posted
7 hours ago, Slave IV said:

Oh man, I want an F-14D! I would have bit if it was this deco:

f-14d_vf101cag_rt.jpg

I have a 1/72 scale diecast model of this exact Tomcat.

20190523_211914-L.jpg

Come over to 1/72 scale. ;)

Posted
15 minutes ago, Vifam7 said:

I have a 1/72 scale diecast model of this exact Tomcat.

20190523_211914-L.jpg

Come over to 1/72 scale. ;)

Haha, I mentioned earlier I have a 1/72 F-14 but it doesn’t scale with any of my Macross toys. I want something 1/100 or 1/60 or 1/48. :p

Honestly, it would be best if I didn’t get any though. I was a big aircraft model builder when I was a kid and had my stuff showcased locally but I don’t want to go back down that path right now either. My best bet is to find some of my old models and hope they are the scales I want. 

Posted
1 hour ago, Slave IV said:

Haha, I mentioned earlier I have a 1/72 F-14 but it doesn’t scale with any of my Macross toys. I want something 1/100 or 1/60 or 1/48. :p

Those would be good scales with your Macross toys.  ;)

Posted
18 minutes ago, sh9000 said:

Those would be good scales with your Macross toys.  ;)

Yep. I haven't seen any already built models in 1/60 or 1/48 so I can hop that some of mine from childhood are. FOr 1/100, there is that AFC stuff you are getting but again, I don't want to go down that rabbit hole so if I get any, I need to be very picky about it.

Posted

Hi all first post just got a 1/60 vf-1a with super/strike parts will need some work but I'm happy I found one

 dtsReMl.jpg

C7oTM7F.jpg

The canopy film was the first thing I noticed and both shoulder joints are cracked

71sftMw.jpg

Posted
50 minutes ago, Keq said:

Hi all first post just got a 1/60 vf-1a with super/strike parts will need some work but I'm happy I found one

 dtsReMl.jpg

C7oTM7F.jpg

The canopy film was the first thing I noticed and both shoulder joints are cracked

71sftMw.jpg

Good choice on the Yammie 1/60 Vf-1a and your first step into the boards.

The shoulder replacements - https://www.shapeways.com/product/DV3KRQCTN/kanzen-henkei-1-60-scale-fighter-variable-hinge?optionId=3675956

As for the cracked rainbow cover tint, you can leave it on or remove it. If you want to remove it - Mr. Clear thinner and Q-tip (not supersaturated and making a mess on the valk, therefore making it worse than before).   

Posted
32 minutes ago, no3Ljm said:

Enjoy your stay and make sure to stay away from the enablers. :lol:

I think the only way to do that around here would be to delete his account and not come back.

We're all enablers.

Posted
12 hours ago, Keq said:

Thanks for the tips, have Mr.color thinner will that do the trick?

That will do as well.

 

 

Posted
3 hours ago, Sanity is Optional said:

I think the only way to do that around here would be to delete his account and not come back.

We're all enablers.

We're not. :db::rolleyes:

 

Posted

I'm tempted on pre-ordering the Arcadia flight stand does anyone know if it will hold a Yammie?

Also cleaned up the broken rainbow flakes looks much nicer now :)

Posted
43 minutes ago, Keq said:

I'm tempted on pre-ordering the Arcadia flight stand does anyone know if it will hold a Yammie?

Also cleaned up the broken rainbow flakes looks much nicer now :)

You're asking about this Variable Stand? If so, then yes, it will hold any Yamato Valkyries since it's using the same mold and adapters for it.

arcadia_stand.jpg.59181673c16afc4de43ad583077549e0.jpg

 

Posted

7B3365F0-7C16-44F5-80F4-F68946BA3C2E.thumb.jpeg.8affbb5edb58802224d3454ea14abcb9.jpeg

D0D070C6-A1B5-4B41-A9BF-C331CED6A93A.thumb.jpeg.8756bc88690323157deda126db0d3a61.jpeg

Got 2 Rick Flags.  Need to find 1 more.  I’ll be using them to make custom Genoshan soldiers for my X-Men.

Posted (edited)

It's been 2 months since I added anything. Really want to get a 3D printer and work on making panels for the detolfs to line with appropriate themes for these.

 

If anyone has any recommendations on not to expensive 3D printer(s) and possible some scenes that come to mind. I'll have to get the measurements for the wall panels from the Ikea site. Maybe it sounds ambitious but I enjoy modeling.

 

I also want to give a big thank you to the Macross World community for allowing me to enjoy these Valkyries, by selling them. 

Apr1-May252019.jpg

Edited by Alphahorizon
Posted
1 hour ago, Alphahorizon said:

It's been 2 months since I added anything. Really want to get a 3D printer and work on making panels for the detolfs to line with appropriate themes for these.

 

If anyone has any recommendations on not to expensive 3D printer(s) and possible some scenes that come to mind. I'll have to get the measurements for the wall panels from the Ikea site. Maybe it sounds ambitious but I enjoy modeling.

 

I also want to give a big thank you to the Macross World community for allowing me to enjoy these Valkyries, by selling them. 

Apr1-May252019.jpg

That’s already a very impressive collection two months in. Congrats. 

Posted

The Focker and Ichijo TV VF-1S as well as DYRL VF-1A are new to me (2002/2008 reissues). But thought I’d get a Chunky group photo with some OG Macross (as well as sneaking in their long lost TF brother).

8674ADC9-1719-4CF3-8E47-097DA79718A9.jpeg

Posted
5 minutes ago, DYRL VF-1S said:

The Focker and Ichijo TV VF-1S as well as DYRL VF-1A are new to me (2002/2008 reissues). But thought I’d get a Chunky group photo with some OG Macross (as well as sneaking in their long lost TF brother).

8674ADC9-1719-4CF3-8E47-097DA79718A9.jpeg

Oh man. Great team DTRL VF-1S! 

Posted
15 minutes ago, rdrunner said:

That’s already a very impressive collection two months in. Congrats. 

Thx @rdrunner, I'm missing a couple HMRs. But now have the Delta line completed until the VF-31E release. I didn't think I would get into the Frontier Valks....But the RVF-25 started that line. What a great addiction!. Cant wsit to dress the HMRs in the OWL armor. Loved that look since I first saw the image posted over a decade ago here on MW from a fan made model.

Posted

Also,

 

Cant recall who, but I was given Madrake as place to shop if I'm okay with a few dings on the boxes. Which I am. Admittedly, they will get thousands from me I feel. 

Guest
This topic is now closed to further replies.
×
×
  • Create New...