Jump to content

Recommended Posts

Posted

Angolz cancelled my VF-22S order and refunded. Their supplier was out of stock.

Anyone wishes to let go of any extra VF-22S Gamlin they have?? I'll give it a good home B))

They canceled mine too. Weak....

Posted

I just panic bought two sets each of the unpainted VF-1A and VF-1J at HLJ. Couldn't help it. I have zero modelling skills and no time to actually build these kits, but figured they might appreciate in the future (especially since people are actually building/modifying them every day). One of the 1As will be an Alaska Base custom.

Posted

I just panic bought two sets each of the unpainted VF-1A and VF-1J at HLJ. Couldn't help it. I have zero modelling skills and no time to actually build these kits, but figured they might appreciate in the future (especially since people are actually building/modifying them every day). One of the 1As will be an Alaska Base custom.

I think I might buy also if they at least cut out the unassembled pieces. I'm guessing its going to be quite a lot of work to cut out the pieces. And it's not easy to do so precisely it seems.

Posted

I think I might buy also if they at least cut out the unassembled pieces. I'm guessing its going to be quite a lot of work to cut out the pieces. And it's not easy to do so precisely it seems.

Actually, I'd say the cutting and assembling is easy. It's planning out the best way to paint them as well as all the masking that's the hardest/most work.

Posted

Actually, I'd say the cutting and assembling is easy. It's planning out the best way to paint them as well as all the masking that's the hardest/most work.

This.

I'd say also the small identity crisis it develops where you don't know if you should go full swing and go all the way with painting/panel lining/oil wash/weathering like a model or keep it simple like a toy.

Posted

Sound the alarm DYRL Kakizaki is sold out and the TV version is low stock on HLJ. The weathered version is only $148 I picked it up and it's very nice! (For a Kakizaki ) :p

Posted

HKC has restocked a few items this week:

VF-19 Sound Booster HK$519 (approx. $67)

VF-17D HK$2269 (approx. $295)

They increased the price of the unpainted VF-1J and VF-1S kits to HK$539 approx. $70 (up HK$10 or $1.30)

Posted

God damn my VF-19S is sitting on my desk looking all Docker and stuff and I'm thinking a VF-22S or VF-17S would look good with it...... *argh* it's killing me... :(

Posted

God damn my VF-19S is sitting on my desk looking all Docker and stuff and I'm thinking a VF-22S or VF-17S would look good with it...... *argh* it's killing me... :(

You can still find one of those two for pretty cheap.. ;)

Posted

w..where did you snag that VB-6 you lucky guy, you

A lucky find off Mandarake. They have one every once in a blue moon.

It was listed as an opened item but when I received it, everything was still sealed. Even the toy itself was covered in mold release agent. It was a new, unopened unit. :)

I used to consider the YF-29 as the turning point where Bandai's Macross toys finally stopped sucking. I was wrong. The VB-6 rocks!

post-5703-0-13664100-1365643505_thumb.jpg

post-5703-0-20394200-1365643551_thumb.jpg

post-5703-0-50089600-1365643583_thumb.jpg

Posted

A lucky find off Mandarake. They have one every once in a blue moon.

It was listed as an opened item but when I received it, everything was still sealed. Even the toy itself was covered in mold release agent. It was a new, unopened unit. :)

I used to consider the YF-29 as the turning point where Bandai's Macross toys finally stopped sucking. I was wrong. The VB-6 rocks!

Oh... you lucky dog you. I'm so jelly.

How much did you pay for it? I've been hunting off Mandarake too, but no dice. I've kept my alerts on figinstock to look out for it though.

Last time I saw it was going for 20,000 yen at a Yahoo Japan Auction with an option to buy it now, but it was gone the next time I checked

Posted

The (relatively) recently discovered issues regarding the YF-19's shoulders are souring me on the whole panic buying spree. Most of this stuff has only been on shelves for a couple of years so who knows what hidden defects will pop up in the future.

Posted

A lucky find off Mandarake. They have one every once in a blue moon.

It was listed as an opened item but when I received it, everything was still sealed. Even the toy itself was covered in mold release agent. It was a new, unopened unit. :)

I used to consider the YF-29 as the turning point where Bandai's Macross toys finally stopped sucking. I was wrong. The VB-6 rocks!

This is VERY true! The VB-6 was the beginning of when Bandai's design and engineering stopped shi*tting the bed! B))

I have the same VB-6 (Special Edition) and it is the best Destroid toy out there as far as I'm concerned. It's better than Yamato's Tomahawk for the simple fact that it transforms (and I love Yamato's Tomahawk too!).

Posted

The (relatively) recently discovered issues regarding the YF-19's shoulders are souring me on the whole panic buying spree. Most of this stuff has only been on shelves for a couple of years so who knows what hidden defects will pop up in the future.

They did use different plastics back then too. Just via touch you can tell those really old 1/60's were a lot different/more brittle. People were discovering breaking shoulders on their YF-19's and breaking arms on their VF-0's many years before this. The newer toys have specifically had most of those old breaking joints replaced with diecast, likely to avoid such problems in the future. There's always a chance still.

Posted

i recetly picked up a 2nd hand YF-19, and while on the surface it looked ok, it did feel a little flimsy in the transformation.

Which areas should i look out for specifically?

Posted

To be honest with you the entire thing is pretty poorly designed IMO. Be careful with all of the joints and understand that in both Gerwalk and Battroid the Torso section does not secure like on the VF-19. It's a floppy mess all around really.

Posted

To be honest with you the entire thing is pretty poorly designed IMO. Be careful with all of the joints and understand that in both Gerwalk and Battroid the Torso section does not secure like on the VF-19. It's a floppy mess all around really.

ahhh that's a bummer.. Guess not much playing.. will probably keep it in either fighter or battoroid mode. Definitely not a fan of the Gerwalk, despite it being my favourite Valk.

At least I got my 19Kai and P to play with :)

Posted

ahhh that's a bummer.. Guess not much playing.. will probably keep it in either fighter or battoroid mode. Definitely not a fan of the Gerwalk, despite it being my favourite Valk.

At least I got my 19Kai and P to play with :)

Posing in Battroid is okay, if fiddly. Until you try to pick it up and the top half separates from the bottom. Fighter holds together well if you can tolerate the gullet. Gerwalk is a huge pain and I skip it... maybe only slightly more often then the VF-19 version of Gerwalk. I usually keep mine in Battroid and just don't pick it up much as I personally feel it's the least objectionable looking of the three modes.

Posted

my Kakizaki TV arrived. just took it out of the box and planted it on a Gundam base (fork plug gripping around the gunpod) my little newphew got me. fits good and looks clean. less than a hundred bucks shipped is a great deal... wished i'd bought me a wall of VF-1's when they were on the cheap @ HLJ.

Posted (edited)

Ha! I didn't know they made Kakizaki TVs! ;)

Kidding aside; pics please of what you are actually talking about.

yeah, i took a pic and all but how do i post it? there's no "attach" button and the "image" button ands a url.

edit: just figured it out

Vf 1a

Edited by D_Unit
Posted

Just got my VF-1A TV browny today; my VF-1 collection of TV only schemes is now complete, I'd be in for a Cavaliers version if I could ever find one around the $100.00 mark, but that is highly unlikely to happen.

I like all the TV schemes, but I have to admit that the CF is my favorite of the bunch (like the DYRL? too, but I avoided getting into those with the V2; besides, I have a few in 1/48, so I'm good for most of the movie versions); just like with Gundam's Mobile suits, the grunt units hold much more appeal to me than the hero ones.

Posted

did i ever mention how gorgeous this baby is? (sorry my crummy photography skills)

VF-19S1-60JOHN-4-11-13_zps9e9084bb.jpg

Posted

Posing in Battroid is okay, if fiddly. Until you try to pick it up and the top half separates from the bottom. Fighter holds together well if you can tolerate the gullet. Gerwalk is a huge pain and I skip it... maybe only slightly more often then the VF-19 version of Gerwalk. I usually keep mine in Battroid and just don't pick it up much as I personally feel it's the least objectionable looking of the three modes.

Sounds like the battroid doesn't lock at the hips or something. or the chest..

I'm alright with the gullet, the fighter mode's my favourite look, and I love the battroid all the same.

Posted

Specifically the chest does not lock down. Gravity is the only thing keeping it in place. It's just poor engineering :(

I still like what we got but it can be much better. The Bandai V1s are a bigger sin IMHO.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...