mslz22 Posted January 5, 2013 Posted January 5, 2013 So after years and years i am really hoping to get this going soon. Casting season is finally wrapped up with only a few odds and ends to send out so i really hope to get more time in on this. Here is just a rough preview, i am hoping by posting it will get me motivated to really get moving on this. The body has been almost completely reworked, the nose, the cannon mounts, side panels, back end have all been reworked or tweaked a bit. It has also been set up for rotocasting. Same with the arm, almost nothing of the original remains, it's a bit longer and more aggressive looking. back end of the gun is complete rework as well, also set up for rotocasting. The engine compartment has had some tweaks as well. New foot also compete rework, will be cast in multiple parts and will be "angled" so that the monstar can have a more aggressive stance.. I still have a lot to do but I have been making progress. I think the only things that will really remain from the V1 will be the arms and even those will get some upgrades. I will be doing my best to make sure this will look at home with the Capt's destroids in the detailing department. thanks mike Quote
MechTech Posted January 5, 2013 Posted January 5, 2013 Michael Knite in the background, "KITT come help, I'm being sanded and crushed by this big gray thing!" Looking great! Building it bigger and better! Can't wait to see the next installment! - MT Quote
EXO Posted January 5, 2013 Posted January 5, 2013 LOL. I think I used to have the KITT and Michael Knight set. The door opens and you can sit him in it. It was an awesome toy. One man can make a difference, and that man is you Michael. Tantanana Tantanana Tantanana nana!!! Quote
Kicker773 Posted January 5, 2013 Posted January 5, 2013 Mike dont' forget to lmk when you start casting again =) Quote
paradogmatic Posted January 5, 2013 Posted January 5, 2013 I had one of your original 1/72s but never had time to build it properly so it moved on; been regretting it since. Now this turns up; looking forward to hearing more about this when its ready to go. Quote
coronadlux Posted January 7, 2013 Posted January 7, 2013 Michael needs some help. maybe kitt is getting a "mostar" upgrade. that thing looks HUGE. how big is it? Quote
cool8or Posted January 8, 2013 Posted January 8, 2013 I have the v1, but if there are enough improvements, may be I could buy this one. Quote
Wasabi-san Posted January 8, 2013 Posted January 8, 2013 Michael Knight versus the new, Macross version of "Goliath?" "Michael...That...BRUTE!...That...MONSTER!...It's coming this way!" (I'm actually building Goliath out of the Snap-Tite Peterbilt COE and 40'Freuhauf trailer (30+yr old kits)) Yes, please let us know if/when you're taking orders and price range. I'm in for at least two. Quote
nautilus Posted January 10, 2013 Posted January 10, 2013 Is dat sum 1/24 valk action in the background? Just pop that in the post to me, Mike. I don't think you'll miss it much.... Quote
Wasabi-san Posted January 11, 2013 Posted January 11, 2013 Man, I'd love to see your workshop sometime! There's quite a bit of "awesomeness" going on with the different genre projects. We use the same medium to high density foam in the shop here at work. Freeman's "Renshape." Cool stuff...but EXPENSIVE! Are the 1:24 Valks still available (kit or built)? Quote
mslz22 Posted January 11, 2013 Author Posted January 11, 2013 Yeah the Renshape is used sparingly if possible. For the real big stuff like the boss pod I use precision board plus modeling foam board. There is an extra step or two involved in finishing but for stuff with a lot of volume it's a lot less expensive, something like the boss pod with renshape would be cost prohibitive. I am actually in the process of updating the shop a bit, just got a milling machine in, plus upgraded the lathe to a Nova 3 chuck to increase the ease of use on that. I have been wanting a mini milling machine for a long time, i have always had to "fake" certain procedures to get around owning one but figured the time had come to get one. I am hoping that it will increase the accuracy and speed of work. I should be able to do a few more valks in the spring if you guys want one... thanks mike Quote
GMK Posted January 14, 2013 Posted January 14, 2013 I should be able to do a few more valks in the spring if you guys want one... thanks mike Yes please Mike! Please include an 'A' head. Any pics of competed ones? Greg Quote
Wasabi-san Posted January 14, 2013 Posted January 14, 2013 Just add the Valk to the list, please. Thanks. Quote
MechTech Posted January 14, 2013 Posted January 14, 2013 That's great you got a mill. I just got one last week. I've been using my drill press with an X-Y table. It's worked, but was VERY limited in the bits I could use and adjustments I could make. Plus it wasn't rigid enough to machine metal. The next step will be to get a lathe come tax time. I'm probably going with Sherline sice they have a awesome reputation and they chucks and parts will go with my mill! Show us some pics sometime. A couple of us are talking about starting up a machining thread to help out theose wanting to get started. - MT Quote
Gabe Q Posted January 15, 2013 Posted January 15, 2013 A couple of us are talking about starting up a machining thread to help out theose wanting to get started. - MT I'm very interested in this! Please do. Quote
mslz22 Posted January 15, 2013 Author Posted January 15, 2013 Which mill did you get? I got the "standard" cheap home one, i guess what is commonly referred to as the X2, the Central Machinery one from harbor freight, almost the same as the grizzly one. I got it on sale so i used the savings to get the upgraded belt drive conversion kit as well from Little machine shop. It will allow for an increase in the RPM, eliminate the broken gear thing, and quiet it down significantly. I should be able to do some aluminum stuff but i really got it to work with Renshape, it should be more than enough to handle that. My metal work would, at least at first, be only for aluminum armatures for the bigger models that i do. For the lathe i have shopfox 1704, i just upgraded it with a Nova 3 chuck, which should improve it significantly. Again, renshape is the material i will be using mostly so it should be powerful enough to handle that. thanks mike That's great you got a mill. I just got one last week. I've been using my drill press with an X-Y table. It's worked, but was VERY limited in the bits I could use and adjustments I could make. Plus it wasn't rigid enough to machine metal. The next step will be to get a lathe come tax time. I'm probably going with Sherline sice they have a awesome reputation and they chucks and parts will go with my mill! Show us some pics sometime. A couple of us are talking about starting up a machining thread to help out theose wanting to get started. - MT Quote
MechTech Posted January 16, 2013 Posted January 16, 2013 That's awesome! I'd like the room to go with the Seig X2, but it's size and weight are actually too much for my bench. Plus I have to shuffle my machines around (and leave room for the children to build with me occasionally ). I would love to work with Renshape, it's just so expensive! I'm going to try the Captain's particle board idea and see how that fares for the next build. Micro Mark came up with the Micro Mill (versus the Mini Mill that you have). It's huge compared to my drill press (which Seig actually markets as the X0). But it's a custom build for them. It's like Sherline's stuff (same size spindle too), but it's rugged cast iron, the neck can go all the way down to 90 degrees (parallel to the table). I can actually lathe with it in that position. Another bonus was that it didn't need any cleanup (no red grease all over). It's about 50 lbs, belt drive, 0-2800 RPM and 150W motor. There are some great billows covering the slides and it's got zero adjustable wheels on it. I think your X2 will be perfect for what you're doing. LMS also has bigger tables for your machine too if you need it. Are you getting a rotary table for your X2. They REALLY broaden your capabilities! Please post machining photos of your progress and builds! - MT Quote
neko_fr Posted January 30, 2013 Posted January 30, 2013 Hi! Late again, I believe As I said in the Monster thread, I'm interrested What would be the price range, for the 1/72 MonstAr ? Please? I'm in awe seeing the pic Quote
mslz22 Posted February 5, 2013 Author Posted February 5, 2013 Hey guys, working on this some this week. Got the new leg struts built and working on refining the foot some more. The leg struts will be cast in 4 parts and they are quite beefy. I still expect this for springtime, keeping my fingers crossed... thanks mike Quote
mslz22 Posted February 5, 2013 Author Posted February 5, 2013 And one with the new knee armor, all this is still just roughed in, will get more refined.. thanks mike Quote
MechTech Posted February 6, 2013 Posted February 6, 2013 (edited) Man, that's gonna be HUGE! As I'm working on mine, I think it will fit on top of that coke can! How much are you thinking of charging for these? I'll have one in 1/350 (pending), 1/300 (Justiciar's Kit), 1/200, and 1/100. Getting one in this scale would be cool too! Yes, I LOVE the Monster! - MT Edited February 9, 2013 by MechTech Quote
Major Focker Posted February 7, 2013 Posted February 7, 2013 there's a 1/100 Monster? or are you pertaining to the Wave kit that's AFAIK is still in development hell? biggest i have so far is 144 in resin. who's making the 1/350? Quote
Berttt Posted February 7, 2013 Posted February 7, 2013 Damn, shelled out on the original and the build has stalled, but I'll have to copy a lot of your improvements into mine..... I'll be following this thread closely. Brett T Quote
MechTech Posted February 7, 2013 Posted February 7, 2013 I scratchbuilt the 1/100 a long time ago and the 1/350th is a WIP; more on that later (I don't want to hijack this thread). So I'm hoping rotocasting will mean less resin and a lower price - MT Quote
Busted VF1A Posted May 14, 2013 Posted May 14, 2013 I always love seeing progress on this. An in-scale monster is sorely missing from my model shelf so I hope I can afford one once you finish it. Quote
Wasabi-san Posted August 26, 2013 Posted August 26, 2013 (edited) . Edited January 31, 2014 by Wasabi-san Quote
mslz22 Posted August 27, 2013 Author Posted August 27, 2013 (edited) A little progress here and there, nothing spectacular. I am sad to say that i got myself into a situation i thought I was smart enough to avoid, too many works in progress. I have about 5 kit patterns at the 80% complete mark, this being the only macross one. My plan right now it to tackle one at a time and stay focused on one pattern until it's done, then move onto the next one, and not start any new ones until at least two or three are done. I have been working non stop on a 3 foot yet to be announced kit (not macross), once that is done i will basically flip a coin to see what's next in line from the 5 unfinished patterns. I likely can't think all that straight until this first pattern, which is the most difficult of all, is done and behind me. The good news is that my youngest daughter is starting real pre school next week, I will be back up to a 5 or 6 day a week work schedule for the first time in 4 years. Hoping to get very productive again. thanks mike Edited August 27, 2013 by mslz22 Quote
Myersjessee Posted August 31, 2013 Posted August 31, 2013 Mike, sounds like you need to find a 5-sided coin! stay sane bud. If you ever need a hand on a casting day give me a hollar. Quote
Spitfire_BR Posted September 1, 2013 Posted September 1, 2013 So i have an idea/dream about how to sell this... welll, Monster ! Just do like our dear Captain makes with the Legioss, released the model in separate installments (arm, leg, torso, guns, as you wish), each installment roughly 2 months apart. You will have time to make it calm and mixing with other projects and we buyers will have time to reserve money to pay it ! ( i'm very concern with the payment because here on Brazil the exchange rate between dolar and our money are terrible these days, US$ 1.00 = R$ 2,40, so (for ex.) if the final model finish around US$ 300.00 i'll pay almost R$ 570.00 without shipping ! And it's half of my paycheck ! I don't know the situation of another dudes outside USA but for me is very difficult, specially because i really want this babe, but still need to eat !) For me separate installments in a such big project is the ideal solution. Just an idea to think about, my 2 cents ! Quote
Ignacio Ocamica Posted September 5, 2013 Posted September 5, 2013 In Argentina the official exchange rate is U$S 1.00 = $5.69. Add 50% import taxes!! Quote
Spitfire_BR Posted September 6, 2013 Posted September 6, 2013 Damm, has forgott the bloody import taxes... Add this to our daily nightmare and we are really doom ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.