mickyg Posted August 20, 2015 Posted August 20, 2015 I think these panels are not very good. Well, until I realise how small they are! Still I bet they can benefit from some cleanup. Quote
MacrossJunkie Posted August 21, 2015 Posted August 21, 2015 (edited) Ok, here's my best attempt at it. I got lazy with the back panels and took some shortcuts since the front and back looked pretty much the same anyway. I have it in green, red, blue, and purple. How it looks: Actual vector image scaled down to match the width of the HUD panel on the toys: Note: Unless you have a very high DPI printer, most of the detail isn't going to show anyway when scaled down to size. vf-25 panels.zip Edit:Tweaked the panels a bit. Added a top border for the back panels. Connected some lines Edited August 21, 2015 by MacrossJunkie Quote
Mommar Posted August 21, 2015 Posted August 21, 2015 It's been quite a while since the last VF-25 was released/reissued, and still not a peep on a VF-25G re-release... I feel for you guys still hunting for G's, though I am surprised Bandai haven't popped off a 25 Leon version just to keep the visibility up. Quote
sh9000 Posted August 22, 2015 Posted August 22, 2015 (edited) I'm glad to finally have a second v2 VF-25G and get rid of the v1. The pos that I bought the v1 from left it dirty and used with extremely loose joints. My display will be great without it. Edited August 22, 2015 by sh9000 Quote
mickyg Posted August 24, 2015 Posted August 24, 2015 Ok, here's my best attempt at it. I got lazy with the back panels and took some shortcuts since the front and back looked pretty much the same anyway. I have it in green, red, blue, and purple. How it looks: vf-25 hud panel samples.jpg Actual vector image scaled down to match the width of the HUD panel on the toys: Note: Unless you have a very high DPI printer, most of the detail isn't going to show anyway when scaled down to size. vf-25 panels.zip Edit:Tweaked the panels a bit. Added a top border for the back panels. Connected some lines These look great MJ! Thanks for going to the effort to both trace them and clean them up. I'm sure they'll help those wanting to spruce up the office in their Messiah Valks. Quote
Lolicon Posted August 24, 2015 Posted August 24, 2015 Yes, thank you for the awesome work! Glad to have some proper displays for the fleet. Quote
Hikaru1234567890 Posted October 8, 2015 Posted October 8, 2015 Anyone know if there would be able to be a 3D printed shoulder joint for the V2? Quote
Duymon Posted October 9, 2015 Posted October 9, 2015 (edited) Anyone know if there would be able to be a 3D printed shoulder joint for the V2? Not sure. The shoulder joint isnt a spot that really has broken a lot for peeps. Plus it's doubtful a 3d printed copy could be more durable than the die-cast used. on a different note.... I wish this was an official loadout for the VF-25 :0 Edited October 9, 2015 by Duymon Quote
Chronocidal Posted October 9, 2015 Posted October 9, 2015 I do remember a mix-and-match guide Bandai put out long ago, I think for the v.1s, and it gave names to a bunch of possible combos of tornado, super, and armor pack parts. Quote
Old Man Posted October 9, 2015 Posted October 9, 2015 I do remember a mix-and-match guide Bandai put out long ago, I think for the v.1s, and it gave names to a bunch of possible combos of tornado, super, and armor pack parts. I'd like to see that! Quote
Pedro2k6 Posted October 9, 2015 Posted October 9, 2015 http://tamashii.jp/special/tamashii_nation/robot_frontier.html?dmode=tpc According to this...on October 30th Bandai will show a new valk prototype from Macross Delta? P.S: Didn't know where to put this.....sorry if it doesn't below here. Quote
abbadon Posted October 9, 2015 Posted October 9, 2015 http://tamashii.jp/special/tamashii_nation/robot_frontier.html?dmode=tpc According to this...on October 30th Bandai will show a new valk prototype from Macross Delta? P.S: Didn't know where to put this.....sorry if it doesn't below here. Nice! Quote
sh9000 Posted October 9, 2015 Posted October 9, 2015 That's awesome. Maybe post that info in the What's next for Bandai thread even though it says (wish list). Quote
Mommar Posted October 9, 2015 Posted October 9, 2015 Not really a surprise given on the 29th they'll reveal all of the mecha. It should be a pretty easy thing for Bandai to show whatever modified version of the 30 will be in the show. Quote
Duymon Posted October 9, 2015 Posted October 9, 2015 And just when I thought the respite to my wallet would last a lil longer...... Quote
Alberich Posted October 9, 2015 Posted October 9, 2015 http://tamashii.jp/special/tamashii_nation/robot_frontier.html?dmode=tpc According to this...on October 30th Bandai will show a new valk prototype from Macross Delta? P.S: Didn't know where to put this.....sorry if it doesn't below here. Wow, the space for the Macross exhibition is really big, I hope that we see a lot of new info regarding Delta and the new valkyries. Quote
Pedro2k6 Posted October 9, 2015 Posted October 9, 2015 I hope they announced a VF-25G re issue too or any other scheme for VF-19 or YF-30 Quote
Saburo Posted October 9, 2015 Posted October 9, 2015 on a different note.... I wish this was an official loadout for the VF-25 :0 WP_20151008_12_36_25_Pro.jpg This reminds me of a thread I created a while back, mix and match all the addon parts for you own custom VF-25. I'd like to see that! 1. Tornado Wings + Armored Parts = Typhoon Messiah (upper left) 2. Tornado Wings + Super Parts = Lightning Messiah (upper right) 3. Tornado Parts + Super Parts + VF-27 Parts = Slash Messiah (lower left) 4. Armored Pack + Tornado Parts = Destroy Messiah (lower right) (List copied from Anymoon.com and ad copy translated by Areaseven) Quote
wmkjr Posted October 9, 2015 Posted October 9, 2015 http://tamashii.jp/special/tamashii_nation/robot_frontier.html?dmode=tpc According to this...on October 30th Bandai will show a new valk prototype from Macross Delta? P.S: Didn't know where to put this.....sorry if it doesn't below here. I hope that it's a photos allowed zone! Quote
no3Ljm Posted October 9, 2015 Posted October 9, 2015 I hope that it's a photos allowed zone! Hahaha! Even if it's not, people are still going to find a way to snap some and post it online. And they still have time to blur people's faces. Quote
valhary Posted October 10, 2015 Posted October 10, 2015 I made an alternative control panel all comments are welcome (no are the final colors) Quote
Mommar Posted October 10, 2015 Posted October 10, 2015 I never got the super parts for Alto but if I had the choice I'd keep him dressed up like that all the time. It's how I have Michael. Quote
spanner Posted October 10, 2015 Posted October 10, 2015 I made an alternative control panel all comments are welcome (no are the final colors) that looks really good valhary! Quote
Sildani Posted October 10, 2015 Posted October 10, 2015 Very nice! How about one for the 27, please? Quote
valhary Posted October 11, 2015 Posted October 11, 2015 if any have the lineart or pics of the interior cockpit I can try do it Quote
Universe1010 Posted October 25, 2015 Posted October 25, 2015 Anyone know where I can get a VF-25G Michael custome renewal version without paying a super high premium? Quote
abbadon Posted October 25, 2015 Posted October 25, 2015 After the reissue of the VF-25S last year, I had high hopes of the 25G reissued this year, but with the expected new Macross Delta valkyries, I wonder if it would even happen next year. Quote
spanner Posted October 25, 2015 Posted October 25, 2015 This reminds me of a thread I created a while back, mix and match all the addon parts for you own custom VF-25. 1. Tornado Wings + Armored Parts = Typhoon Messiah (upper left) 2. Tornado Wings + Super Parts = Lightning Messiah (upper right) 3. Tornado Parts + Super Parts + VF-27 Parts = Slash Messiah (lower left) 4. Armored Pack + Tornado Parts = Destroy Messiah (lower right) (List copied from Anymoon.com and ad copy translated by Areaseven) I really like this shot! A great combo of parts! Quote
anubis20 Posted October 27, 2015 Posted October 27, 2015 Not sure. The shoulder joint isnt a spot that really has broken a lot for peeps. Plus it's doubtful a 3d printed copy could be more durable than the die-cast used. on a different note.... I wish this was an official loadout for the VF-25 :0 WP_20151008_12_36_25_Pro.jpg i really like that set up! What i really dislike about the Tornado parts are those cannons Quote
Hikaru1234567890 Posted October 30, 2015 Posted October 30, 2015 (edited) So I've been trying to fins some parts for my 25F and not able to find any. I REALLY don't want to have to buy another 25F and pay over 200+ for one. any one know what I should do? pics below. Edited October 30, 2015 by Hikaru1234567890 Quote
ArchieNov Posted October 30, 2015 Posted October 30, 2015 I have a "junker" VF-25F that has lots of scratches and a crack at one hinge, plus some really loose joints. Right now I'm using it as my display valk in fighter mode with Super parts. Fortunately in this mode none of the flaws are apparent nor do they make a difference. If you're just after that part, I might be inclined to sell you the whole thing for a large discount. But if you're overseas from my location, then it's probably not worth the cost. Quote
Hikaru1234567890 Posted October 30, 2015 Posted October 30, 2015 I have a "junker" VF-25F that has lots of scratches and a crack at one hinge, plus some really loose joints. Right now I'm using it as my display valk in fighter mode with Super parts. Fortunately in this mode none of the flaws are apparent nor do they make a difference. If you're just after that part, I might be inclined to sell you the whole thing for a large discount. But if you're overseas from my location, then it's probably not worth the cost. Yeah I live in the US so it might not but Thanks for the offer! (my still just take you up on it) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.