Moosey Posted January 12, 2015 Posted January 12, 2015 Now C'Mon Bandai, re-release the armour... Motion seconded Quote
chyll2 Posted January 12, 2015 Posted January 12, 2015 Got my 25S renewal from NY, and she's great. Nice n tight, no scratches, a great looking machine! Now C'Mon Bandai, re-release the armour... are there any artwork or game screenshot that shows another 25 using armour parts aside from Alto and Ozma? Quote
Doublepush Posted January 12, 2015 Posted January 12, 2015 I have a question, probably been answered before but I haven't seen it mentioned much as a common issue. Anyway, I'm having a hard time getting the intakes/hips to stay pegged in to the fuselage in gerwalk mode. The left is especially bad but both of them fall out of place all the time while trying to adjust the pose of the legs, and makes it next to impossible to maintain any sort of pose with it on the included stand. It seems to pop out even worse when I use the built in support for the aft section during gerwalk. I've already thought about applying future or super glue, but I'm not sure if that will work with the style of connection Quote
mickyg Posted January 12, 2015 Posted January 12, 2015 (edited) I encountered this early on with my brand new 25F and it's been a few weeks, but I think it has to do with the orientation of the crotch piece. If my memory serves, mine wasn't properly aligned (in other words, not unfolded properly when I went from Battroid). Once I got that part sitting properly, the hips stayed in much better. Edited January 12, 2015 by mickyg Quote
Doublepush Posted January 13, 2015 Posted January 13, 2015 And success. Took a more detailed approach to transforming that section into gerwalk and also tightened a few screws here and there (specifically behind the hips for the ball joint) and they stiffened right up and now I can pick up my 25 in gerwalk with one hand and it stays as solid as my v2 vf1. Well, not quite that solid but still pretty damn close Quote
Sildani Posted January 13, 2015 Posted January 13, 2015 (edited) That's what you think: http://www.nippon-yasan.com/product.php?id_product=8318 For 19,000Â¥. Edited January 13, 2015 by Sildani Quote
chyll2 Posted January 14, 2015 Posted January 14, 2015 haha. they were sold out hours ago. I guess they can restock it anytime Quote
Saburo Posted January 14, 2015 Posted January 14, 2015 Maybe they set a number of units for sale, then once that number is sold it goes to "sold out". Then they roll dice to see what the next mark up will be and set the next number of units for sale. Repeat. Quote
chyll2 Posted January 14, 2015 Posted January 14, 2015 sneaky bastards, I really thought they never changed price. I did not notice the 800 yen increase initially Quote
Hikaru1234567890 Posted January 20, 2015 Posted January 20, 2015 Does anyone know how to tighten the arm hinge on the 25? Its gotten pretty loose since the first 3 transformations. Anyone know how to fix it? Quote
chyll2 Posted January 20, 2015 Posted January 20, 2015 Does anyone know how to tighten the arm hinge on the 25? Its gotten pretty loose since the first 3 transformations. Anyone know how to fix it? Can you post a photo (even if it is from anyone/internet) to see what arm hinge is loose?as it is, a general and temporary fix will always be applying a clear varnish/coat on to the affected hinge/joints. Quote
charger69 Posted January 21, 2015 Posted January 21, 2015 (edited) Can someone please take a picture of a V2 DX VF box and DX Tornado Parts together (especially showing box's thickness)? I'm trying to guess the size of the shipping box if I put several items together... Edited January 21, 2015 by charger69 Quote
chyll2 Posted January 21, 2015 Posted January 21, 2015 (edited) Can someone please take a picture of a V2 DX VF box and DX Tornado Parts together (especially showing box's thickness)? I'm trying to guess the size of the shipping box if I put several items together... cant give you pictures but from my memory, it is thinner than Renewal or Armoured parts box but the difference is not that big Edited January 21, 2015 by chyll2 Quote
Saburo Posted January 21, 2015 Posted January 21, 2015 (edited) Can someone please take a picture of a V2 DX VF box and DX Tornado Parts together (especially showing box's thickness)? I'm trying to guess the size of the shipping box if I put several items together... I'll take a photo when I get home from work. Update: Here's a quick pic. Edited January 22, 2015 by Saburo Quote
Hikaru1234567890 Posted January 24, 2015 Posted January 24, 2015 Can you post a photo (even if it is from anyone/internet) to see what arm hinge is loose?as it is, a general and temporary fix will always be applying a clear varnish/coat on to the affected hinge/joints. Yeah I can, I will do it tomorrow after i get back from work! Quote
charger69 Posted January 24, 2015 Posted January 24, 2015 Thank you Saburo! 3 inches vs. 4 inches. These tornado parts are fat! Quote
McFly!! Posted January 24, 2015 Posted January 24, 2015 I'll take a photo when I get home from work. Update: Here's a quick pic. Good deed for the week! This is why this community rawks! Quote
close313 Posted January 25, 2015 Posted January 25, 2015 Saburo when you take blurry shots like that,my brain can't believe it's you Quote
Saburo Posted January 25, 2015 Posted January 25, 2015 (edited) Saburo when you take blurry shots like that,my brain can't believe it's you Hahaha.. that's because my assistant took that shot. He's not that great with the camera, but here is a shot of him editing photos. j/k! Yes, its not my best shot. I was trying to hold the tape measure in one hand and use my phone camera in the other. I didn't want to break out the DLSR. Edited January 25, 2015 by Saburo Quote
spanner Posted January 25, 2015 Posted January 25, 2015 Hahaha.. that's because my assistant took that shot. He's not that great with the camera, but here is a shot of him editing photos. j/k! Yes, its not my best shot. I was trying to hold the tape measure in one hand and use my phone camera in the other. I didn't want to break out the DLSR. so what your saying is your "assistant" is the one who's really responsible for all those super cool photos!? hehe! Quote
Saburo Posted January 25, 2015 Posted January 25, 2015 so what your saying is your "assistant" is the one who's really responsible for all those super cool photos!? hehe! Damn, you figured me out... Quote
Shukenzero Posted January 25, 2015 Posted January 25, 2015 Hahaha.. that's because my assistant took that shot. He's not that great with the camera, but here is a shot of him editing photos. j/k! Yes, its not my best shot. I was trying to hold the tape measure in one hand and use my phone camera in the other. I didn't want to break out the DLSR. Cutest thing ever!!! Quote
Saburo Posted January 25, 2015 Posted January 25, 2015 Cutest thing ever!!! Don't let his appearance fool you, he'll work you to death. Quote
spanner Posted January 25, 2015 Posted January 25, 2015 Damn, you figured me out... Its cool, we still luv ya! Quote
Guest davidwhangchoi Posted January 26, 2015 Posted January 26, 2015 Hahaha.. that's because my assistant took that shot. He's not that great with the camera, but here is a shot of him editing photos. j/k! Yes, its not my best shot. I was trying to hold the tape measure in one hand and use my phone camera in the other. I didn't want to break out the DLSR. hahahahaha Quote
Hikaru1234567890 Posted January 29, 2015 Posted January 29, 2015 Heres the shoulder hinge, I dare not take it off cause its a real pain to put it back together. Any advice on how to tighten it? and that is NOT a crack. Quote
NightCastle Posted January 29, 2015 Posted January 29, 2015 and that is NOT a crack. Say no to crack! Sorry, someone had to say it. Quote
mechaninac Posted January 29, 2015 Posted January 29, 2015 Say no to crack! Sorry, someone had to say it. Crack is wack! ... What?... Too soon? Quote
no3Ljm Posted January 30, 2015 Posted January 30, 2015 *snip* Heres the shoulder hinge, I dare not take it off cause its a real pain to put it back together. Any advice on how to tighten it? and that is NOT a crack. Hope someone will post any remedies on this one soon. I also have the same issue with my Alto's. Quote
spanner Posted January 30, 2015 Posted January 30, 2015 Say no to crack! Sorry, someone had to say it. Crack is wack! ... What?... Too soon? hehe! you guys crack me up! sorry.. had to.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.