caslon Posted August 30, 2012 Share Posted August 30, 2012 In answer to your questions Kelsain; A) The DYRL missile pack has the DYRL missile placement and TV hubs and the TV missile pack has both TV missile placement and hubs. B) No, but I plan to photograph and do a step by step of dissambly of the torso - but the arms, legs and backpack are all pretty straight-forward and don't require step-by-steps, no? Decal sheets used are some from the 1/100 Glaug kit, a couple from the 1/144 Nousjadeul Ger kit and the rest were from the 1/144 Queadluun kit - about 1 and a half sheets (I have 3 kits). And thanks! Glad you dig! I made the ball joints in the fingers a little smaller than they should be to allow for paint and clear coats - but even with 4 or 5 coats of nail varnish, they're still a little too loose for my liking - keep this in mind, but if ppl want - I can make them bigger. Finally you've reassembled it, it looks more appealing than the DYRL type in terms of everything! The paint which you'd chosen was perfectly matched the mecha itself! Bravo!! So what's your next project then, kurissama? Hehe... Quote Link to comment Share on other sites More sharing options...
Kurisama Posted August 30, 2012 Author Share Posted August 30, 2012 Next project? Finish the VF-0C conversion! After that? Either the VF-11 of VF-0 armour. Quote Link to comment Share on other sites More sharing options...
3D-Brainx Posted August 30, 2012 Share Posted August 30, 2012 That's amazing! Great job! My vote goes for the VF-11 Armour! Quote Link to comment Share on other sites More sharing options...
caslon Posted August 30, 2012 Share Posted August 30, 2012 The VF-0 armor is gonna be sweet! Quote Link to comment Share on other sites More sharing options...
claude grant Posted August 30, 2012 Share Posted August 30, 2012 Even unfinished this custom is already paying off...the 'real drag' is not having one in my possession to drool over! Quote Link to comment Share on other sites More sharing options...
Mommar Posted August 30, 2012 Share Posted August 30, 2012 ...I ...want... one..! Quote Link to comment Share on other sites More sharing options...
UN Spacy Posted August 31, 2012 Share Posted August 31, 2012 WOW. I'm very impressed....good job man. Quote Link to comment Share on other sites More sharing options...
Gian Posted August 31, 2012 Share Posted August 31, 2012 I hope you make the VF-11 armor which is better in terms of awesomeness IMO Quote Link to comment Share on other sites More sharing options...
3D-Brainx Posted August 31, 2012 Share Posted August 31, 2012 I hope you make the VF-11 armor which is better in terms of awesomeness IMO I agree, but then again, Yamato might surprice us next year, now that they are making M7 toys. Quote Link to comment Share on other sites More sharing options...
valhary Posted August 31, 2012 Share Posted August 31, 2012 (edited) just to be clear still missing the visor of the head right? Edited August 31, 2012 by valhary Quote Link to comment Share on other sites More sharing options...
Kurisama Posted August 31, 2012 Author Share Posted August 31, 2012 Missing visor, fingers and exhaust plugs - still on the fence about the plugs tho. Quote Link to comment Share on other sites More sharing options...
Mommar Posted August 31, 2012 Share Posted August 31, 2012 Why the fences and plugs? Quote Link to comment Share on other sites More sharing options...
Kurisama Posted August 31, 2012 Author Share Posted August 31, 2012 For one thing, it looks fine without - I've added some soot and it looks good to me. Secondly the proportions of the vents/backpack to the plugs doesn't quite match the 1/144. And finally I'm not quite happy with the angle they jut out at, they point a little too far away from each other. One more thing is that if I wanted to fix the angle in Maya, I'd also bubble-ify the overall straight edged shape of it - would better blend in to the exhaust port. But that's just pedantic OCD me Quote Link to comment Share on other sites More sharing options...
sreichma Posted September 2, 2012 Share Posted September 2, 2012 (edited) I think the exhaust looks fine without the ports, The Q- Rau's always had a Raw feel and look to them, and the wide open exhaust it has now looks more brute. This is a piece to keep and will go down in macross mod legend I'm sure. Edited September 2, 2012 by sreichma Quote Link to comment Share on other sites More sharing options...
Kurisama Posted September 11, 2012 Author Share Posted September 11, 2012 So has anyone purchased any pieces for the Rau? I'm curious as the sales section in the Shapeways store is busted and there is no way to tell. Quote Link to comment Share on other sites More sharing options...
danbickell Posted September 11, 2012 Share Posted September 11, 2012 So has anyone purchased any pieces for the Rau? I'm curious as the sales section in the Shapeways store is busted and there is no way to tell. A bunch of those features on the Shapeways site aren't working, but the "yippie!" emails have been going out again the last 2 weeks. If you got any sales in the last 2 weeks, you should have received emails for them, regardless of the website not showing any sales. I'm in the same boat. I just got my first "yippie!" email yesterday, so if I have any other sales, they would have to have been more than 2 weeks ago and I just don't know about them yet. Not holding my breath though... Quote Link to comment Share on other sites More sharing options...
Kurisama Posted September 11, 2012 Author Share Posted September 11, 2012 That... that means... no one wants them... Quote Link to comment Share on other sites More sharing options...
bravo5 Posted September 11, 2012 Share Posted September 11, 2012 I purchased mine about two weeks ago and got them last Thursday (F'ING AWESOME by the way). I think their site may not accurately record sales. Quote Link to comment Share on other sites More sharing options...
Kurisama Posted September 11, 2012 Author Share Posted September 11, 2012 Aaaah, cool - thank you! Thank you so much Glad you like them - any improvements you may suggest? Its a real shame that they aren't recording sales - it's really in their court if they wanna sell some and not let me know - and I could never find out! But thats just grumpy old irritable me, probably not the case - innocent until proven guilty, right?! I'm excited to see what other people do with their own customs! Quote Link to comment Share on other sites More sharing options...
danbickell Posted September 11, 2012 Share Posted September 11, 2012 Congrats! See, you did get at least 1 sale. The fact that it was more than 2 weeks ago and you didn't hear about it gives me hope! They're supposed to send emails when the sales actually ship (in addition to the "yippie!" emails), so I was wondering if those weren't going out for the sales from 2+ weeks ago as well (as in sales from more than 2 weeks ago that maybe just shipped last week when the emails were supposedly working again). Hopefully on the 15th of next month, we'll be able to get the spreadsheets with any sales listed (and some funds in our PayPal accounts). I would totally want a set, Kurisama, if I had a Q Rau and/or could afford it. Don't take lack of sales for lack of desire. Your stuff is awesome! Quote Link to comment Share on other sites More sharing options...
Kurisama Posted September 11, 2012 Author Share Posted September 11, 2012 Thanks buddy! Cyber-high-five, don't leave me hanging! I was showing my students ur VF-1 thread yesterday, btw - they were in awe Quote Link to comment Share on other sites More sharing options...
danbickell Posted September 11, 2012 Share Posted September 11, 2012 Right on! Back at you, bro Quote Link to comment Share on other sites More sharing options...
Kurisama Posted September 11, 2012 Author Share Posted September 11, 2012 Hahahaaaha! Quote Link to comment Share on other sites More sharing options...
Kelsain Posted September 11, 2012 Share Posted September 11, 2012 (edited) I'm trying to clean up a mesh before I order a few things. I shrink wrapped it, and am now trying to add thickness, but mesh lab crashes every time! Trying to figure out an alt (free) way. But I have the vf-11 shield clip & rau head in my cart! (null) Edited September 11, 2012 by Kelsain Quote Link to comment Share on other sites More sharing options...
Kurisama Posted September 11, 2012 Author Share Posted September 11, 2012 Awesome! Thanks Kelsain What do u mean shrink wrap? What program are u using or it just meshlab? I'm confused... Can I help? Quote Link to comment Share on other sites More sharing options...
Kelsain Posted September 11, 2012 Share Posted September 11, 2012 Maybe? I'll PM ya later! Quote Link to comment Share on other sites More sharing options...
valhary Posted February 23, 2013 Share Posted February 23, 2013 for start this project I order the antennae Quote Link to comment Share on other sites More sharing options...
Kurisama Posted March 15, 2013 Author Share Posted March 15, 2013 Hey dudes, tiny update: Needs another clear coat I think to hide the decal seam better, but otherwise pretty much complete. Available here: http://www.shapeways.com/model/616008/hembra-xeno-mech-impacto-cannon.html Quote Link to comment Share on other sites More sharing options...
tundrayeti Posted March 15, 2013 Share Posted March 15, 2013 Kurisama, have you considered just 3d printing your models as masters and casting them? Trust me i use this process and it's much more cost effective and easier to keep track of your sales. Dont get me wrong, i used to love shapeways, but their quality and pricing has undergone tqoo many radical changes over the last few years for my taste. There are far better 3d printing companies out there, that make a part that needs no cleanup. All you have to do is throw it in some silicon rubber and make your resin copies. This allows you to use 3d printing to make high quality prototypes and then copy them using resins that are much stronger. Just my 2 cents but its working well for me. If you dont have the skills or knowledge, hit up some of the members on this forum, usually everyone is eager to help. Quote Link to comment Share on other sites More sharing options...
CoreyD Posted March 15, 2013 Share Posted March 15, 2013 That's actually a really awesome idea. I know I've held out on the VF0D conversion parts due to the porous looking finish on wsf material shapeways uses. Quote Link to comment Share on other sites More sharing options...
Kurisama Posted March 15, 2013 Author Share Posted March 15, 2013 (edited) I'd love to do that, tundrayeti - but I'd have no idea where or how to start... Also what other companies do you recommend or suggest I look at? I'd love to make molds of my stuff! Edited March 15, 2013 by Kurisama Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted March 15, 2013 Share Posted March 15, 2013 This is just my personal preference, but as far as replacement parts go, I do prefer plastic to resin, if only because I'm more experienced with it. I really do need to start fiddling with making some stuff again, I've been wanting to make a properly sized VF-25G sniper pod, and rebuild the nose on my YF-19. Quote Link to comment Share on other sites More sharing options...
claude grant Posted March 16, 2013 Share Posted March 16, 2013 Kurisama, Imagine if u & the guys in your modeling circle/club/organization, that is if u r in one, decided to collectively invest in something like this... http://3dprinting.com/3dprinters/the-form-1-prosumer-a-revolutionary-desktop-3d-printer/ With your current stable of products, and whatever else your fellow comrades/contributors offered, u could realistically become your own smaller scale Shapeways type company. Quote Link to comment Share on other sites More sharing options...
Benson13 Posted March 16, 2013 Share Posted March 16, 2013 Just watched that video and I have total nerd lust going on right now. Quote Link to comment Share on other sites More sharing options...
Kurisama Posted March 16, 2013 Author Share Posted March 16, 2013 Claude - dude, thank you for that link. HRRRRRNNNG.... Just wow, and that is very affordable... And impressive. I'm going to hold out a year - bigger build size and greater accuracy are inevitable. And unfortunately, I am not part of a group - I am flying solo :-( sob sob sob. Scratch that, I'm part of the MW forums, and the support, advice and help I get from members here truly makes me feel part of a group. Honestly you guys are awesome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.