levzloi Posted July 27, 2020 Posted July 27, 2020 4 hours ago, sh9000 said: @levzloi Very nice set and custom VF-1J. Is the arm armor supposed to be placed differently on the VF-1J? Ah... the screws, didn't notice that, I put the parts on in Battroid mode, and I didn't even notice I got them reversed. Quote
kkx Posted July 27, 2020 Posted July 27, 2020 On 7/25/2020 at 2:19 PM, Lolicon said: Haha thanks all. My case is minor and I never felt the need to go to the emergency room or anything. Just super fatigued for almost two weeks and didn't have the energy to do anything except rest, watch TV, and occasionally crawl to the kitchen to eat something. I'm still barred from returning to work pending a negative COVID test, but at least I'm still getting paid. Anyway, it seems Yamato took a page from Bandai's playbook and started screwing and gluing everything together, making taking apart the VF-11 a bit of a chore. Made my own decal sheet in preparation. Decals are for both the B and C. I am interest in making my own decal. Would love to know what printer you use to print white. Quote
EastwindS2k Posted July 27, 2020 Posted July 27, 2020 On 7/25/2020 at 5:19 PM, Lolicon said: Haha thanks all. My case is minor and I never felt the need to go to the emergency room or anything. Just super fatigued for almost two weeks and didn't have the energy to do anything except rest, watch TV, and occasionally crawl to the kitchen to eat something. I'm still barred from returning to work pending a negative COVID test, but at least I'm still getting paid. Anyway, it seems Yamato took a page from Bandai's playbook and started screwing and gluing everything together, making taking apart the VF-11 a bit of a chore. Made my own decal sheet in preparation. Decals are for both the B and C. Welcome back and nice work. The VF11C is the best looking fighter in M7 to me Take care! Quote
Lolicon Posted July 27, 2020 Posted July 27, 2020 3 hours ago, kkx said: I am interest in making my own decal. Would love to know what printer you use to print white. Sadly, printing white is not possible unless you have a special decal printer. Fortunately, the 11C is almost completely white so it isn't really an issue. 3 hours ago, EastwindS2k said: Welcome back and nice work. The VF11C is the best looking fighter in M7 to me Take care! Thanks! I'm developing a new appreciation for the Thunderbolt now that I've spent a lot more time messing with it, as opposed to just sitting on a display stand as it has been all these years. Quote
vlenhoff Posted July 28, 2020 Posted July 28, 2020 Switching things a bit. Miria is going up for sale so the 1S Hikkie took her place. Included Kaneda in there, to keep it away from dust. Quote
vlenhoff Posted July 29, 2020 Posted July 29, 2020 (edited) Changed stuff around... Centered the Cosmic fleet base logo. It is a miracle they both fit in the same display. This was a lucky surprise. Edited July 29, 2020 by vlenhoff Quote
vlenhoff Posted July 29, 2020 Posted July 29, 2020 2 hours ago, Kanedas Bike said: ^Kaneda's Bike! -b. Indeed! That is the Bandai version, and I still think Kaneda is a bit oversized in relation to the bike. I displayed the bike by itself for a very long time, but i caved in lately. On the other end, she is a tad too small. Sadly I bought her from a member here many years ago, and she is extremely flimsy, falling apart right out of the box. Her limbs just fall apart. I need to learn that trick about coating the ball joint with nail polish, is it? Quote
borgified Posted July 29, 2020 Posted July 29, 2020 (edited) 51 minutes ago, vlenhoff said: Indeed! That is the Bandai version, and I still think Kaneda is a bit oversized in relation to the bike. I displayed the bike by itself for a very long time, but i caved in lately. On the other end, she is a tad too small. Sadly I bought her from a member here many years ago, and she is extremely flimsy, falling apart right out of the box. Her limbs just fall apart. I need to learn that trick about coating the ball joint with nail polish, is it? You can use Future/Pledge Floor Finish/"Kragle" to tighten up the joints and use a very small drop on the joints and move it around as it drys. Don't keep it in one position for a long time otherwise it will stay in that pose forever. If it's still too loose after the first try, let the first coat dry completely and then add the second coat. Put too much on and it will slop all over the place and defeat the purpose. Tutorials on Youtube as well - "Loose joints on action figures", etc. Edit: Added a Lego Movie reference as well. Edited July 29, 2020 by borgified Quote
vlenhoff Posted July 30, 2020 Posted July 30, 2020 5 hours ago, borgified said: You can use Future/Pledge Floor Finish/"Kragle" to tighten up the joints and use a very small drop on the joints and move it around as it drys. Don't keep it in one position for a long time otherwise it will stay in that pose forever. If it's still too loose after the first try, let the first coat dry completely and then add the second coat. Put too much on and it will slop all over the place and defeat the purpose. Tutorials on Youtube as well - "Loose joints on action figures", etc. Edit: Added a Lego Movie reference as well. Youtube! You're right, i have learned o do so many things thanks to youtube!. Thanks for the tip. I 've been meaning to do this for a while now. I bought some used blackseries stormtroopers years ago, and some of them are all loose, sadly. I just wanted to army build those and I got some pre-abused ones i guess. Thanks for the tips @borgified. I was going to get that Bondic stuff, sculpt a bigger ball joint over the ball joint, and then pop them back in. Has anyone experimented with Bondic? Is it as good as they advertise it is? Quote
MacrossJunkie Posted July 30, 2020 Posted July 30, 2020 3 hours ago, vlenhoff said: Youtube! You're right, i have learned o do so many things thanks to youtube!. Thanks for the tip. I 've been meaning to do this for a while now. I bought some used blackseries stormtroopers years ago, and some of them are all loose, sadly. I just wanted to army build those and I got some pre-abused ones i guess. Thanks for the tips @borgified. I was going to get that Bondic stuff, sculpt a bigger ball joint over the ball joint, and then pop them back in. Has anyone experimented with Bondic? Is it as good as they advertise it is? Bondic sounded interesting to me when I had first learned of it, but when I looked at the reviews on Amazon for it, I shied away from trying it. Quote
sqidd Posted August 2, 2020 Posted August 2, 2020 20 minutes ago, Lolicon said: Starting to look a little less bland now. I don't know.........still looking pretty bland. You should probably put that back together and give it to me. Quote
MacrossJunkie Posted August 2, 2020 Posted August 2, 2020 2 hours ago, Lolicon said: Starting to look a little less bland now. If you really want to make it not bland, you should paint it with the Pink Peckers squadron colors. Quote
Lolicon Posted August 2, 2020 Posted August 2, 2020 6 hours ago, sqidd said: I don't know.........still looking pretty bland. You should probably put that back together and give it to me. You can have all my Macross stuff in the event I die in a blimp crash. 3 hours ago, MacrossJunkie said: If you really want to make it not bland, you should paint it with the Pink Peckers squadron colors. I still think that's the best and worst squadron name ever. Quote
sqidd Posted August 2, 2020 Posted August 2, 2020 3 hours ago, Lolicon said: You can have all my Macross stuff in the event I die in a blimp crash. I still think that's the best and worst squadron name ever. Is that you in a blimp and it crashes. Or you get hit by a crashing blimp? Or both. I just want to make sure that I arrange this accurately we're on the same page. Quote
Lolicon Posted August 4, 2020 Posted August 4, 2020 Got my VF-11C to where I'm satisfied with it now. Such a lovely bird relegated to cannon fodder duty. Guess I should get the 11B up to speed too. Quote
seti88 Posted August 4, 2020 Posted August 4, 2020 Now thats a big difference for the plain vs panel lined vf-11. Beautiful work! Quote
MKT Posted August 4, 2020 Posted August 4, 2020 Great stuff @Lolicon! The VF-11 is such a beauty! But I'm not holding out hope Arcadia will ever issue it. So far, they seem to have given up on any cannon-fodder stuff ever since taking over from Yamato.. Quote
tekering Posted August 4, 2020 Posted August 4, 2020 I hesitate to do the same to mine, knowing its aftermarket value... but damn, you really demonstrate the potential there! You could probably turn around and sell it for a lot more, too. Quote
MacrossJunkie Posted August 4, 2020 Posted August 4, 2020 @Lolicon Looks great! The stickers and decals added really help and the weathering touches on it look nice. Quote
ErikElvis Posted August 4, 2020 Posted August 4, 2020 @Lolicon Looks fantastic! I didn’t mind it before but your weathering really kicks it up 10 notches. Quote
DYRL VF-1S Posted August 4, 2020 Posted August 4, 2020 2 hours ago, Lolicon said: Before & after pics. Awesome work!!! Quote
levzloi Posted August 4, 2020 Posted August 4, 2020 2 hours ago, Lolicon said: Got my VF-11C to where I'm satisfied with it now. Such a lovely bird relegated to cannon fodder duty. Guess I should get the 11B up to speed too. Very very pretty.. Quote
borgified Posted August 4, 2020 Posted August 4, 2020 Excellent work on the VF-11 to make it stand out from the rest of the crowd! Quote
Sanity is Optional Posted August 4, 2020 Posted August 4, 2020 You gave it a rainbow canopy treatment as well? Quote
Lolicon Posted August 4, 2020 Posted August 4, 2020 Thanks guys. Yeah I wish Arcadia would revisit this one with a new mold too. Improve the heat shield and improve the posability, especially around the thigh intakes, It's hard to do any kind of posing without the intakes scraping the main body. 6 hours ago, tekering said: I hesitate to do the same to mine, knowing its aftermarket value... but damn, you really demonstrate the potential there! You could probably turn around and sell it for a lot more, too. Nah, all this is just for my own personal enjoyment. I'm keeping this one forever. Also, I know you're more than capable of doing an way better job than me. 3 hours ago, Sanity is Optional said: You gave it a rainbow canopy treatment as well? Haha no I cheated. I used the cockpit pod from my 11B (which does have a rainbow canopy) for these pics. Quote
Lolicon Posted August 4, 2020 Posted August 4, 2020 Yuck why does the board turn everything into a link after posting a BB link? Quote
eyesonme78 Posted August 6, 2020 Posted August 6, 2020 Hi All, I need some help. I purchase a 1/48 yamato vf-1a and I had a macross hangar arm stand from China but without the adapters . Can anyone advise where could i get them? Quote
claude grant Posted August 6, 2020 Posted August 6, 2020 Best bet is to wait for Yetistand to re-open, God willing, and check with him. He already has or can make just about any adapter you can think of. And his stuff is great quality. He's got a new job and it's keeping him quite busy at the moment though. You could also post in the 'WANTED' section. Quote
eyesonme78 Posted August 9, 2020 Posted August 9, 2020 On 8/7/2020 at 1:01 AM, claude grant said: Best bet is to wait for Yetistand to re-open, God willing, and check with him. He already has or can make just about any adapter you can think of. And his stuff is great quality. He's got a new job and it's keeping him quite busy at the moment though. You could also post in the 'WANTED' section. Thanks for the heads up. I will wait Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.