Saburo Posted June 15, 2018 Posted June 15, 2018 (edited) While cleaning Detolf shevles, Delta meets Frontier. Edited June 15, 2018 by Saburo Quote
spanner Posted June 15, 2018 Posted June 15, 2018 On 6/14/2018 at 3:43 AM, Lolicon said: Only took 35 years, but I finally have a TV Roy that I'm satisfied with. *snipped for resize* TV and movie versions! (Movie version is still incomplete.) 2 hours ago, Saburo said: While cleaning Detolf shevles, Delta meets Frontier. absolutely gorgeous photos guys!!! Quote
505thAirborne Posted June 15, 2018 Posted June 15, 2018 2 hours ago, Saburo said: While cleaning Detolf shevles, Delta meets Frontier. DAMN!!!!!!!!! That's a beautiful sight!!! Quote
Lolicon Posted June 16, 2018 Posted June 16, 2018 8 hours ago, Saburo said: While cleaning Detolf shevles, Delta meets Frontier. Fantastic! SMS would mop the floor with Delta squadron. 6 hours ago, spanner said: absolutely gorgeous photos guys!!! Welcome back, Alex! Quote
borgified Posted June 16, 2018 Posted June 16, 2018 Oooo… My turn to spin the wheel. Valks: Past (Arcadia Strike VF-1s with the Yamato V.2 valk stand) and Present (DX Delta 31c with Supers). Note that there are no pilots nor armaments. Quote
Shizuka the Cat Posted June 16, 2018 Posted June 16, 2018 16 hours ago, borgified said: Oooo… My turn to spin the wheel. Valks: Past (Arcadia Strike VF-1s with the Yamato V.2 valk stand) and Present (DX Delta 31c with Supers). Note that there are no pilots nor armaments. Technically since it is 2018 , it would be valks past and future. Hmmm... In 2018, would the VF-4 still be a present model? Or would the VF-11 have been introduced by now? Quote
borgified Posted June 17, 2018 Posted June 17, 2018 Good point(s) there @Shizuka the Cat. I wasn't really paying close attention to the Macross timeline when I posted these pics up; however as of the valks in collectable format, then this might be a possibility. This is my understanding based on what I gathered on this website on the Macross Mecha Manual: http://www.macross2.net/m3/m3.html The VF-4 will still be around while the VF-5000 would be on the drawing boards. The VF-11 didn't come into plans until 2028. http://www.macross2.net/m3/flashback2012/vf-4.htm http://macross2.net/m3/macrossplus/vf-5000b.htm http://www.macross2.net/m3/macrossplus/vf-11b.htm Does this help? Quote
Lolicon Posted June 17, 2018 Posted June 17, 2018 Fry: People need Star Trek to give them hope for the future! Leela: But it's set 800 years in the past! Quote
Ignacio Ocamica Posted June 19, 2018 Posted June 19, 2018 Reposting old pics of the Yamato 1/60 Regult. Wish Arcadia released it in toy form. Quote
seti88 Posted June 19, 2018 Posted June 19, 2018 5 hours ago, Ignacio Ocamica said: Reposting old pics of the Yamato 1/60 Regult. Wish Arcadia released it in toy form. Now that would be worth a rerelease and a PF version... Quote
SuperDimensionalDave Posted June 20, 2018 Posted June 20, 2018 On 6/15/2018 at 11:33 PM, Lolicon said: Fantastic! SMS would mop the floor with Delta squadron. So would Justin Beiber wielding nothing more than a pair of salad tongs. Quote
Lolicon Posted June 21, 2018 Posted June 21, 2018 My DYRL Roy which I started in 2013 and only just now completed. Five years isn't too bad, right? And with that I think I need a break from decaling VF-1s for awhile. Hopefully my PF 0S arrives today and I can start tinkering with that. Quote
sumyumgoy Posted June 21, 2018 Posted June 21, 2018 Looks great! Love the panel lining/shading...nice and subtle. Did you top coat it too? Quote
Lolicon Posted June 21, 2018 Posted June 21, 2018 1 hour ago, sumyumgoy said: Looks great! Love the panel lining/shading...nice and subtle. Did you top coat it too? Thanks! Yeah she's completely top coated. Don't want the decals and such rubbing off. Quote
Slave IV Posted June 21, 2018 Posted June 21, 2018 3 hours ago, Lolicon said: My DYRL Roy which I started in 2013 and only just now completed. Five years isn't too bad, right? And with that I think I need a break from decaling VF-1s for awhile. Hopefully my PF 0S arrives today and I can start tinkering with that. Looks fantastic! Great job and dedication! Quote
wm cheng Posted June 21, 2018 Posted June 21, 2018 LOOKS FANTASTIC!!! (Those Hasegawa decals totally paid off!) Quote
Lolicon Posted June 22, 2018 Posted June 22, 2018 Thanks guys. The main 1S was finished years ago but I sat on the strike parts and weapons all these years. It was one of those "I'll do it this afternoooooon!" situations where "afternoon" turned into five years. Quote
chyll2 Posted June 22, 2018 Posted June 22, 2018 (edited) Weathered, decal'd. The rainbow canopy still being good. So beautiful. @Lolicon are you planning to top coat the strike/super parts as well? Edited June 22, 2018 by chyll2 Quote
Lolicon Posted June 22, 2018 Posted June 22, 2018 7 minutes ago, chyll2 said: Weathered, decal'd. The rainbow canopy still being good. So beautiful. @Lolicon are you planning to top coat the strike/super parts as well? Everything is already coated. Quote
Xigfrid Posted June 22, 2018 Posted June 22, 2018 It is really a beauty! Did you air brush the panel lines or you used the tamiya weathering kit? I think the later but it looks so clean Quote
Lolicon Posted June 23, 2018 Posted June 23, 2018 9 hours ago, Xigfrid said: It is really a beauty! Did you air brush the panel lines or you used the tamiya weathering kit? I think the later but it looks so clean Used the Tamiya weathering kit. Quote
Slave IV Posted June 24, 2018 Posted June 24, 2018 Waterslide decals of Skulls and Kites added to some of my Valks thanks to @Lolicon & @sumyumgoy Need to adjust my printer to print darker and maybe not try to cut circles at 3am but hey, looks better than nothing and I'm happy. Quote
Slave IV Posted June 24, 2018 Posted June 24, 2018 No 1/3000 for this thread? Just focus on 1/100 then Quote
Lolicon Posted June 24, 2018 Posted June 24, 2018 10 hours ago, Slave IV said: Waterslide decals of Skulls and Kites added to some of my Valks thanks to @Lolicon & @sumyumgoy Need to adjust my printer to print darker and maybe not try to cut circles at 3am but hey, looks better than nothing and I'm happy. Looks good! The kite came out especially nice. 5 hours ago, Slave IV said: No 1/3000 for this thread? Just focus on 1/100 then Open it! Quote
Slave IV Posted June 24, 2018 Posted June 24, 2018 4 hours ago, Lolicon said: Looks good! The kite came out especially nice. Open it! Thanks! Probably looks better since it’s out of focus. Oh, I will open it. Been waiting a lifetime to! Quote
Slave IV Posted June 25, 2018 Posted June 25, 2018 And Max now has his Kites too. Man, I suck at this! Thank goodness for PF version if I really cared that much. Quote
sh9000 Posted June 25, 2018 Posted June 25, 2018 Display the SDF-1 in the distance with DYRL HMR in front of it. That would look sweet. Quote
Slave IV Posted June 25, 2018 Posted June 25, 2018 1 minute ago, sh9000 said: Display the SDF-1 in the distance with DYRL HMR in front of it. That would look sweet. Definitely! I have a similar plan that may work better. Will see when I get around to it. Quote
Lolicon Posted June 25, 2018 Posted June 25, 2018 5 hours ago, Slave IV said: And Max now has his Kites too. Man, I suck at this! Thank goodness for PF version if I really cared that much. Looks good to me! Is the decal not laying completely flat on the surface? Some decal softener can easily fix that. Quote
Slave IV Posted June 25, 2018 Posted June 25, 2018 10 minutes ago, Lolicon said: Looks good to me! Is the decal not laying completely flat on the surface? Some decal softener can easily fix that. Thanks! I think I may have just gotten lazy and not pressed it flat all the way around with the qtip. Never used decal softener before but I’ll check it out if I need to. Quote
sumyumgoy Posted June 25, 2018 Posted June 25, 2018 looks like a nice circle to me! I agree with the decal softener recommendation, you just brush a little bit over it and it'll conform nicely to the shape of the booster. Quote
derex3592 Posted June 25, 2018 Posted June 25, 2018 Be very careful with decal softner on decals you printed yourself..... Quote
Slave IV Posted June 25, 2018 Posted June 25, 2018 Thanks for the compliments and recommendations! I've never had to use decal softener before and this shouldn't be an issue since it is just a smooth flat surface. I think the issue was just me half assing the job. If I redo it, I will post new pics to see the difference. Looking at it again, I think it may benefit from a topcoat if I do redo it so I'll see how it all turns out. Quote
no3Ljm Posted June 25, 2018 Posted June 25, 2018 11 minutes ago, Slave IV said: Thanks for the compliments and recommendations! I've never had to use decal softener before and this shouldn't be an issue since it is just a smooth flat surface. I think the issue was just me half assing the job. If I redo it, I will post new pics to see the difference. Looking at it again, I think it may benefit from a topcoat if I do redo it so I'll see how it all turns out. Make sure that if you're going to use decal softener, apply a topcoat first on your decal. Without so, the softener will ruin your printed decal. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.