Thom Posted January 31 Posted January 31 1 hour ago, derex3592 said: You begin to think you might just have some modicum of talent...then @MechTech posts an update....then you crawl back under your model table and begin to re-think your life....😂 HAHA! @MechTech does raise the bar into the stratosphere! Quote
Urashiman Posted January 31 Author Posted January 31 @MechTech your stuff could only be more scale, if those little shells were actual life ammo hahahaha Quote
Rock Posted January 31 Posted January 31 After Iran was cut off from USA tech they played around with adapting mim-23 Hawk surface to air missiles! https://www.twz.com/33456/iran-equipped-its-f-14s-with-modified-hawk-sams-that-had-bombs-attached-to-their-noses Here is a great read/transcribe on reddit with images. Quote
derex3592 Posted February 1 Posted February 1 Well....the little brass breakup pattern stencils didn't turn out quiet as easy to use as they were in my head but I guess it looks ok... Dunno.. Still undecided if I wanna keep it or strip it off and do my freehand marbling method like I did on the subs.... The problem was keeping it flat on the complex curves and angles all over the plane. Quote
MechTech Posted February 1 Posted February 1 Thank you for the kind words everyone! "You begin to think you might just have some modicum of talent...then @MechTech posts an update....then you crawl back under your model table and begin to re-think your life....😂" Thank you @derex3592! You're toooo funny! You've also been putting out some great looking models too - like the Hornet! @pengbuzz NOBODY can beat your masking tape skills - NOBODY! Thank you and that is a COOL meme (and accurate) too! Thank you @Thom! Thank you @Urashiman! If I could make them that small, I would!😎 Sorry guys, for those that are interested, I forgot to tell you about this (full size so you can see detail): About $25-30 at Hobby Lobby! They've had other Gundam stuff there too occasionally. It is printed on canvas with overlapping edges. Ready to hang too! - MT Quote
wm cheng Posted February 1 Posted February 1 (edited) 3 hours ago, derex3592 said: Well....the little brass breakup pattern stencils didn't turn out quiet as easy to use as they were in my head but I guess it looks ok... Dunno.. Still undecided if I wanna keep it or strip it off and do my freehand marbling method like I did on the subs.... The problem was keeping it flat on the complex curves and angles all over the plane. That's looking great, I have a stencil like that too that I've been thinking of trying but I have found this guy I'm following on Facebook and he's amazing in 1/72 scale. I think I might try his acrylic ink technique instead of these spray patterns as I find it more scale appropriate for 1/72. Have a look here; https://luftraum72.com/layered-ink-patina-technique/ He's a fellow Canuklehead too and I have his book and its amazing!!! Highly recommend it. Edited February 1 by wm cheng Quote
Rock Posted February 1 Posted February 1 5 hours ago, derex3592 said: Well....the little brass breakup pattern stencils didn't turn out quiet as easy to use as they were in my head but I guess it looks ok... Dunno.. Still undecided if I wanna keep it or strip it off and do my freehand marbling method like I did on the subs.... The problem was keeping it flat on the complex curves and angles all over the plane. If yours came with 3, cut one in half and on the other remove the thick border edge. Or just bend one into a 90° angle. That way you can get in closer. Remember you don't want perfect patterns. Imperfect is more natural as counter intuitive as that sounds. A bit of trial and error, keep going! Quote
derex3592 Posted February 1 Posted February 1 @wm cheng - Thanks, will check that out! @Rock - Ahh, good points! I'll try those tips on the Tomcat! Quote
arbit Posted February 1 Posted February 1 On 1/31/2024 at 2:13 AM, MechTech said: All of the gun mechanisms below deck are controlled through this panel on the actual gun. The model has two LEDs. One is a color changer and the other is a tea-light candle LED to flicker. All are soldered to a 1.5V "Joule Thief" board to run them. LOTS of blackout methods used to control the light leakage. Lots of nice little details on such a small scale. What's with the Joule Thief, is it to save space from a 3V setup? Quote
Urashiman Posted February 2 Author Posted February 2 On 2/1/2024 at 1:47 PM, derex3592 said: Well....the little brass breakup pattern stencils didn't turn out quiet as easy to use as they were in my head but I guess it looks ok... Dunno.. Still undecided if I wanna keep it or strip it off and do my freehand marbling method like I did on the subs.... The problem was keeping it flat on the complex curves and angles all over the plane. I need these stencils too ... I have been searching the internet but no luck. Where do you have them from? Quote
derex3592 Posted February 2 Posted February 2 (edited) @Urashiman - They were a Christmas gift, so I don't know off hand, but take a look at this website, these might be far better and flexible, not to mention probably cheaper! https://www.greenstuffworld.com/en/280-airbrush-stencils AK Interactive maybe? Maybe @Rock can chime in here.... Edited February 2 by derex3592 Quote
nightmareB4macross Posted February 2 Posted February 2 In case you were wondering. Strength test of swing plates. I attached a leg 😜 to see if it will hold and be strong enough to support the weight. Quote
Chas Posted February 2 Posted February 2 Looks really great NB4M! @MechTech dude! Your work is simply inspiring. (And your tools are enviable!) Always a pleasure to see what you've been up to. @arbit wish I had the patience to learn 3D modeling. The things that 3D printers make possible, I mean the sky is the limit, and your designs look so good. Fist asteroid underway. Quote
F18LEGIOSS2 Posted February 3 Posted February 3 Working on my Legioss Gakken and waterslide decals Quote
Rock Posted February 3 Posted February 3 9 hours ago, Urashiman said: I need these stencils too ... I have been searching the internet but no luck. Where do you have them from? -see below- 5 hours ago, derex3592 said: @Urashiman - They were a Christmas gift, so I don't know off hand, but take a look at this website, these might be far better and flexible, not to mention probably cheaper! https://www.greenstuffworld.com/en/280-airbrush-stencils AK Interactive maybe? Maybe @Rock can chime in here.... Uschi van der Rosten's "Trinity Splatter 2" is by far the best set I've come across. Their site has plenty of companies to buy them from, or just go to good old eBay. A few others make and sell them as "weathering airbrush stencils." AK is popular alternative. I just really like the brass one for durability/reusability and since you have to soak them in thinner to clean (no scrubbing as they are essentially a big photo etch piece. https://www.uschivdr.com/shopping-categories/shop-photo-etch/ Quote
nightmareB4macross Posted February 3 Posted February 3 6 hours ago, F18LEGIOSS2 said: Working on my Legioss Gakken and waterslide decals Looking good! Can’t wait to see the finished figure. Quote
nightmareB4macross Posted February 3 Posted February 3 7 hours ago, Chas said: Looks really great NB4M! @MechTech dude! Your work is simply inspiring. (And your tools are enviable!) Always a pleasure to see what you've been up to. @arbit wish I had the patience to learn 3D modeling. The things that 3D printers make possible, I mean the sky is the limit, and your designs look so good. Fist asteroid underway. Thank you, I couldn’t have done it with out the inspiration. Quote
Chas Posted February 3 Posted February 3 Big one and two smaller 'roids - maybe one more mid sized to build. Quote
arbit Posted February 3 Posted February 3 17 hours ago, Chas said: @arbit wish I had the patience to learn 3D modeling. The things that 3D printers make possible, I mean the sky is the limit, and your designs look so good. Thanks Chas. Very nice of you. Personaly I find it a great way to have fun with Macross. Quote
F18LEGIOSS2 Posted February 4 Posted February 4 Extended knee joints and feet for my gakken legioss wip Quote
Urashiman Posted February 4 Author Posted February 4 (edited) @derex3592 & @Rock ah great! thanks a lot - gonna get the uschi stuff Got the trinity 1 + 2 bundle for 19.99€ Edited February 4 by Urashiman Quote
Bolt Posted February 4 Posted February 4 On 2/1/2024 at 4:47 AM, derex3592 said: Well....the little brass breakup pattern stencils didn't turn out quiet as easy to use as they were in my head but I guess it looks ok... Dunno.. Still undecided if I wanna keep it or strip it off and do my freehand marbling method like I did on the subs.... The problem was keeping it flat on the complex curves and angles all over the plane. Beautiful job⭐️ Quote
MechTech Posted February 5 Posted February 5 @wm cheng Thank you for posting that link regarding using acrylic inks! I actually bought a couple colors in green to try and color the tiny 1/72 scale projectiles. I had to settle with paint; but like you said, the ink pigments are finer and more scale looking. Even some of the best paints can still chunk up. The inks didn't work for me (they don't stick to metal😎), but in testing, I could tell right away they have potential for other effects. @nightmareB4macross That is going to be a Super Chunky Monkey (with less chunky - more SUPER)!👍 @Chas Thank you, I appreciate it! I never thought you'd hit the 'roids!🤣 Seriously though, that is going to be a COOL looking diorama! @Urashiman Thank you! They are Plastruct letters used to make a "shadow" or reverse stencil. Thankfully, they sell them all over the world: https://www.plastruct.com/search?q=letters @F18LEGIOSS2 It's great to see another old figure get some restoration! @arbit To keep the motor running at the correct speed, I had to use a 1.5v battery. The Joule Thief enables me to keep the same battery AND run the LEDs. I don't need a bunch of separate batteries. They have to be left out anyhow when not in use to prevent leaks ruining things, so the less the better. Isamu's bike (and babe) look awesome! You must be on a Macross Plus kick😁 AWESOME looking sculpt! - MT Quote
electric indigo Posted February 5 Posted February 5 On 2/1/2024 at 5:32 PM, wm cheng said: That's looking great, I have a stencil like that too that I've been thinking of trying but I have found this guy I'm following on Facebook and he's amazing in 1/72 scale. I think I might try his acrylic ink technique instead of these spray patterns as I find it more scale appropriate for 1/72. Have a look here; https://luftraum72.com/layered-ink-patina-technique/ He's a fellow Canuklehead too and I have his book and its amazing!!! Highly recommend it. Amazing effect, but it looks like a lot of tedious processing. I would never finish a kit going that route. Speaking of, I completed the Intruder cockpit today. Quote
arbit Posted February 5 Posted February 5 3 hours ago, MechTech said: Isamu's bike (and babe) look awesome! You must be on a Macross Plus kick😁 AWESOME looking sculpt! - MT Thanks. Yes, it is all M+, all the time, for the foreseeable future. Isamu's flight suit was been a big challenge, and I had to learn a lot to get through it. Quote
Thom Posted February 6 Posted February 6 9 hours ago, pengbuzz said: Revisited this. Stay tuned. That's just about screen-worthy! Very cool. Quote
MechTech Posted February 7 Posted February 7 @electric indigo That cockpit looks cool. The pose of the pilots talking to each other makes it look more realistic. I know a retired pilot who has over a 1000 traps in the Intruder. He was smart and tape recorded his audio over the helmet headphones during the Vietnam war. There's a couple of missions where SAMs were fired at him. They got his recordings and made them available at the Naval Air Museum for visitors. You can hear the warning tone go off and then the crew take evasive action. It's cool to be able to hear what actually happened during those missions. @pengbuzz That's cool! So the question is, set to kill or set to stunning!?😁 - MT Quote
505thAirborne Posted February 7 Posted February 7 (edited) Sorry for the quality of pics, it's either been raining, snow or today, it's super windy outside and my cameras are horrid with indoor lighting. Well, here she is, my YF-23 Black Widow II. I have a little touch up to do on the landing gear/wheels but overall, I'm calling it done. Edited February 7 by 505thAirborne Quote
Urashiman Posted February 8 Author Posted February 8 11 hours ago, 505thAirborne said: Sorry for the quality of pics, it's either been raining, snow or today, it's super windy outside and my cameras are horrid with indoor lighting. Well, here she is, my YF-23 Black Widow II. I have a little touch up to do on the landing gear/wheels but overall, I'm calling it done. nice! Quote
pengbuzz Posted February 8 Posted February 8 On my workbench now: Keeping a promise to some lost friends; first up is the F-14A Tomcat (VF-1 Wolfpack September 1974, CV(A)N-65 U.S.S. Enterprise). The next two will be the F-14A (Top Gun, Maverick/Goose's plane, 1986), then the F-14D (VF-213 Black Lions, 2005). These represent the birth, zenith and end of the F-14's career over a span of 31+ years. Cockpit's pretty much done; just need to clean up around the frame. once that's done, masking and initial priming commences. Stay tuned... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.