mslz22 Posted May 21, 2011 Author Posted May 21, 2011 Please send me a PM to get pricing info... As for the total edition, right now my plan is for between 15-20 total. thanks mike Ok, someone need to do the dirt job... How much $$$$$ ? Please keep in mind I only have one kidney and half liver in my body ! Quote
THOR Posted May 23, 2011 Posted May 23, 2011 After talking to Mike, he said I can do missiles and landing gear. I need to know who wants them. Missile Package would include: 12 missiles 4 pylons (3 missiles each) Later Landing Gear Package: modeled directly from the 1/48 kit rear landing gear: box, gear, wheel, 2-3 doors front landing gear box, gear, wheel, 2-3 doors Who wants them? -THOR Quote
neptunesurvey Posted May 23, 2011 Posted May 23, 2011 I will take 1 set of missiles and a landing gear package. Quote
hirohawa Posted May 24, 2011 Posted May 24, 2011 I'll take a set of the landing gear as well. Thanks Quote
idontknow Posted May 24, 2011 Posted May 24, 2011 After talking to Mike, he said I can do missiles and landing gear. I need to know who wants them. Missile Package would include: 12 missiles 4 pylons (3 missiles each) Later Landing Gear Package: modeled directly from the 1/48 kit rear landing gear: box, gear, wheel, 2-3 doors front landing gear box, gear, wheel, 2-3 doors Who wants them? -THOR Count me in for a set of both. Quote
peter Posted May 25, 2011 Posted May 25, 2011 Dammit, I just went over my money situation and I really can't afford any toys/fun stuff until August......I really, REALLY want one of these......and the thought of FP possibly coming is really messing with me. ....please make more in the near future......... Quote
THOR Posted June 1, 2011 Posted June 1, 2011 (edited) since there will be so few wanting missiles/landing gear, i will print the items out for individuals rather than printing a master and making molds and resin copies. i will try to post the missile & pylon prices up this weekend. i will also try to to post pics of landing gear from my Solidworks screen. i might have prices too. lots of work to do this weekend getting ready for casting my 1/48 gerwalk conversion, lancer, and 1/72 syncher cannon... Edited June 1, 2011 by THOR Quote
THOR Posted June 13, 2011 Posted June 13, 2011 1/24 landing gear coming along nicely: the rear gear: made so you fit an aluminum rod down the center for strength front pic coming soon and prices... Quote
THOR Posted June 29, 2011 Posted June 29, 2011 hard drive crashed! new computer on the way. good thing i always back up my work like a true nerd should. i'll be back in the sadle this week hopefully if all the software installs go well. i made good progress on the 1/24 landing gear before the crash. need to finish the front gear and all three wells so that they fit with the model. i'll also post prices for 1/24 weapons. sorry about the delay! Quote
peter Posted June 30, 2011 Posted June 30, 2011 I still wish I was in on this action, but I can't wait to see some of the builds! Did Kurt or WM Cheng buy one of these? I'd kill to see one of them build one of these bad boys. Quote
Kicker773 Posted July 4, 2011 Posted July 4, 2011 can't wait for mine to arrive =) who do we order the weapons from and landing gear? Quote
THOR Posted July 6, 2011 Posted July 6, 2011 Everybody, I'll be posting prices for landing gear and weapons this weekend, God willing. Getting computer fixed today! -THOR Quote
peter Posted December 24, 2011 Posted December 24, 2011 Thought I'd revive this thread because I want to see some more pictures! Anyone build one of these bad boys up yet? Quote
mslz22 Posted December 24, 2011 Author Posted December 24, 2011 Boy time goes by fast, I have been sooooo busy with casting to help Nice-N catch up that i have not even gotten started on the 2nd build for the guide, I have been doing stuff for him non stop since Sept. I am planning on getting to it around mid Jan and will document it well here, maybe even a separate build thread. I am going to light my 2nd build, i need to order some fiber optics and LED's for the build. I just built up a new work area dedicated to builds and scratchbuilding only, I really hope it will streamline some stuff....i can't believe how much of a mess i make sometimes. Hope everyone has a terrific holiday....and hope to see some of you guys at WF 2012, yes my thoughts turn right to spring after the holidays. mike Quote
peter Posted January 5, 2012 Posted January 5, 2012 Hey Everyone, I'm really hoping to see some of the pros here at Macrossworld get on board with this thing! I'm definitely down for one, but I don't have the skills or time to build it nicely. I'm just pluck away at it whenever time allows. It would be nice to see guys like Kurt or WM Cheng tackle one of these Peter Quote
Ghadrack Posted January 6, 2012 Posted January 6, 2012 Boy time goes by fast, I have been sooooo busy with casting to help Nice-N catch up that i have not even gotten started on the 2nd build for the guide, I have been doing stuff for him non stop since Sept. I am planning on getting to it around mid Jan and will document it well here, maybe even a separate build thread. I am going to light my 2nd build, i need to order some fiber optics and LED's for the build. I just built up a new work area dedicated to builds and scratchbuilding only, I really hope it will streamline some stuff....i can't believe how much of a mess i make sometimes. Hope everyone has a terrific holiday....and hope to see some of you guys at WF 2012, yes my thoughts turn right to spring after the holidays. mike Are you going to have a table at WF again? If so, and you wanted to give a brotha some hints about stuff that might be available, you might entice me to pack my wallet and get in the car in May Quote
mslz22 Posted January 6, 2012 Author Posted January 6, 2012 Right now the plan is to hang out with Steve at his table, he will have some studio scale stuff (likely cast by me!), and i am hoping to bring along some 1/48 goodies....Hope to see you guys there again, I am hoping to not be so stuck at the table again this year..... thanks mike Quote
peter Posted January 18, 2012 Posted January 18, 2012 Hey Mike, Any pics of your 2nd build? Peter Quote
mslz22 Posted January 19, 2012 Author Posted January 19, 2012 (edited) Soon, I've got to finish up the last few Y wings for Nice-N Models before i can really dig in. I am hoping to spend the next few months building the "destructions" for this, finishing up the 1/48 pod and get a few other related projects off the ground. Wish I could just build macross stuff all day, but paying gigs like casting work always get in the way! I've started basics on the 2nd build including dremmel work on the wings to run some fiber optics for the wing tip lights....i will likely start another build thread when i have enough done to justify it... thanks mike Hey Mike, Any pics of your 2nd build? Peter Edited January 19, 2012 by mslz22 Quote
peter Posted January 19, 2012 Posted January 19, 2012 (edited) Pmt sent! Looking forward to getting this monster! Edited January 19, 2012 by peter Quote
leading edge Posted January 25, 2012 Posted January 25, 2012 (edited) dude can't wait to see the cockpit by the way are you going to make a circuit to make up the display. Or is there going to be a digital how is this going to work cause i love it. also is that clay in the picture or primer on the model. Edited January 25, 2012 by leading edge Quote
IScustom Posted January 29, 2012 Posted January 29, 2012 I can believe this 1/24 monster can come into the real world. Awesome work! Do hope finally a fast pack will be included!! And what is its head? ID /1S/ 1A/ 1J? Quote
Ghadrack Posted February 3, 2012 Posted February 3, 2012 Right now the plan is to hang out with Steve at his table, he will have some studio scale stuff (likely cast by me!), and i am hoping to bring along some 1/48 goodies....Hope to see you guys there again, I am hoping to not be so stuck at the table again this year..... thanks mike Cool. I just booked my room, I wasn't sure if I was going to be able to make it this year due to a work obligation / conference in Florida, but it will nto conflict so I'll defiintely be by to see the table. hopefully I can scratch together some decent fun money again this year I'd like to bring a couple models to put in the show, it's been a busy year between my job and recently moving into a new house that has required some "Fixing Upping", but We'll see. Quote
peter Posted February 3, 2012 Posted February 3, 2012 Man, I hope there'll be a fast pack/strike version of this thing....the detailing possbilities from some of the model masters here will be limitless! Quote
new_member Posted February 4, 2012 Posted February 4, 2012 So...how do you get one of these without having to make it to WF? Quote
cobywan Posted March 8, 2012 Posted March 8, 2012 I've seen some amazing stuff being done with some micro lcd display modules. They even have a built in micosd slot. Quote
chyll2 Posted June 24, 2014 Posted June 24, 2014 facebook page redirected me to this awesome thread Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.