Duymon Posted May 24, 2018 Posted May 24, 2018 (edited) I've been on a GM Binge lately. Been barely doing any Macross collecting due to all the P-Bandai. I still can't believe I got 5 White Dingo Sniper kits..... Edited May 24, 2018 by Duymon Quote
hachi Posted May 25, 2018 Posted May 25, 2018 (edited) Got the shipping notice from HLJ. So the following are incoming: RG Tallgeese, RG MkII Titans version, HG Leo, HG Gundam Ground Type. Meanwhile... https://imgur.com/PmAVOnq Edited May 25, 2018 by hachi link Quote
hachi Posted May 29, 2018 Posted May 29, 2018 Aaaaannd customs has my package. Maybe I was just too greedy shipping out 4 kits in one shipment--but it was cheaper that way. I'm just praying they let it through, the value is way below the taxable amount. I don't want to have to go pick them up from the post office T_T Quote
chyll2 Posted May 29, 2018 Posted May 29, 2018 There should be no problem if the combined cost of the kits and shipping is below 10,000 PHP. Unfortunately, you have to pick it up depending on the shipping method you use (SAL in local post office, Central Mail at Pasay for EMS) Quote
hachi Posted May 30, 2018 Posted May 30, 2018 On 5/29/2018 at 6:11 PM, chyll2 said: There should be no problem if the combined cost of the kits and shipping is below 10,000 PHP. Unfortunately, you have to pick it up depending on the shipping method you use (SAL in local post office, Central Mail at Pasay for EMS) Luckily I don't live where I have to go to Pasay EMS. Unfortunately the package seems to be stuck in Manila customs whereas I am in the provinces. Let's see if my VF31C super parts arrive earlier than the Gundam kits, as it should not be as big a package. I am also waiting for another package (from US) so I am really a bit irritated/impatient this week and it will continue next week until any or all of the 3 arrive. ^_^; Quote
Kelsain Posted June 2, 2018 Posted June 2, 2018 (edited) On 5/24/2018 at 12:19 PM, Duymon said: I've been on a GM Binge lately. Been barely doing any Macross collecting due to all the P-Bandai. I still can't believe I got 5 White Dingo Sniper kits..... Godammit, now you’ve got me interested in MG’s again... Really though, that might be nice, I don’t really have time or room to paint, and the MGs can still look pretty good without it. Are those GM’s painted, or just panel lined? Edited June 3, 2018 by Kelsain Quote
Shinobi Rendar Posted June 3, 2018 Posted June 3, 2018 I finally finished my RG Wing Gundam EW. Just did some paint on the clear parts and the yellow. Also added some minor dry brush weathering. You can check out more pics at the instagram link. Quote
Big s Posted June 4, 2018 Posted June 4, 2018 I just got the hguc gouf flight type in the mail. It looks like there are only seam lines on the weapons. So I gotta recommend this one to lazy builders. Quote
Duymon Posted June 4, 2018 Posted June 4, 2018 On 6/2/2018 at 7:10 PM, Kelsain said: Godammit, now you’ve got me interested in MG’s again... Really though, that might be nice, I don’t really have time or room to paint, and the MGs can still look pretty good without it. Are those GM’s painted, or just panel lined? Most of them were just detail painted, decaled and top-coated. The dual SMG GM was painted, however. Quote
Kelsain Posted June 4, 2018 Posted June 4, 2018 5 hours ago, Duymon said: Most of them were just detail painted, decaled and top-coated. The dual SMG GM was painted, however. Interesting, I thought the MG GM Space type was more of a greenish color. I busted out my MG Dom that's been in the build pile since 2002, and I'm gonna finish that up. I 've realized that , while I enjoy coming up with project ideas and paint schemes, I just don't have the time to see them through. I build over lunch sometimes at work, and that's all I've got to work with. May as well jus have fun with the build once in a while! Quote
renegadeleader1 Posted June 4, 2018 Posted June 4, 2018 (edited) 52 minutes ago, Kelsain said: Interesting, I thought the MG GM Space type was more of a greenish color. I busted out my MG Dom that's been in the build pile since 2002, and I'm gonna finish that up. I 've realized that , while I enjoy coming up with project ideas and paint schemes, I just don't have the time to see them through. I build over lunch sometimes at work, and that's all I've got to work with. May as well jus have fun with the build once in a while! The RGM-79C GM Kai space type is indeed a minty green, but those bodies are from the RMS-179 GM II from Zeta gundam. Note the collar camera and lack of carry bars on the shoulders. The heads I believe are from the ground forces release of the GM kai which may have been white as opposed to the brownish color the HG release had. Edited June 4, 2018 by renegadeleader1 Quote
Kelsain Posted June 4, 2018 Posted June 4, 2018 18 minutes ago, renegadeleader1 said: The RGM-79C GM Kai space type is indeed a minty green, but those bodies are from the RMS-179 GM II from Zeta gundam. Note the collar camera and lack of carry bars on the shoulders. The heads I believe are from the ground forces release of the GM kai which may have been white as opposed to the brownish color the HG release had. Aah, I got it then. These GM's are also P-bandai's, with head-swaps for the GM Kai ground. Dang, they're pretty. Quote
hachi Posted June 5, 2018 Posted June 5, 2018 On 5/30/2018 at 6:19 PM, hachi said: Luckily I don't live where I have to go to Pasay EMS. Unfortunately the package seems to be stuck in Manila customs whereas I am in the provinces. Let's see if my VF31C super parts arrive earlier than the Gundam kits, as it should not be as big a package. I am also waiting for another package (from US) so I am really a bit irritated/impatient this week and it will continue next week until any or all of the 3 arrive. ^_^; The postman delivered both my Gundam kits and the VF31C super parts today! Me now happy Quote
Duymon Posted June 5, 2018 Posted June 5, 2018 16 hours ago, Kelsain said: Aah, I got it then. These GM's are also P-bandai's, with head-swaps for the GM Kai ground. Dang, they're pretty. The moment I found out the GM II unicorn version came with both regular GM II head and the GM Kai head I started buying them en-masse lol Quote
Kelsain Posted June 5, 2018 Posted June 5, 2018 Heh, I'm sure they're not cheap now! I'm thinking about grabbing that GM Dominance, though. It's pretty kick ass. Just trying to figure out if it's worth the $$ to me. Maybe if I sell off a few other models that I'll probably never get to. Quote
renegadeleader1 Posted June 6, 2018 Posted June 6, 2018 All these new F91 kits do is give me hope for a RE/100 Heavygun, Hardygun, or G-Cannon. Actually I'd love them in 1/144 scale instead as the F91 ones would be the only GM's not to have ever had a release in that scale. Quote
Duymon Posted June 6, 2018 Posted June 6, 2018 (edited) 3 hours ago, renegadeleader1 said: All these new F91 kits do is give me hope for a RE/100 Heavygun, Hardygun, or G-Cannon. Actually I'd love them in 1/144 scale instead as the F91 ones would be the only GM's not to have ever had a release in that scale. Ah man..... I want those three GM's updated so bad, though in 1/144 they'd be pretty petite :0 It's almost guaranteed we'll see the F91 ver MG Jegan in P-Bandai Edited June 6, 2018 by Duymon Quote
Duymon Posted June 6, 2018 Posted June 6, 2018 1 hour ago, no3Ljm said: From TagHobby: Such a cool-looking kit, but at that price + a 2000-3000 yen I could literally grab a PG Unicorn in Akihabara or somewhere else :0 Quote
Sanity is Optional Posted June 6, 2018 Posted June 6, 2018 I'm not sure how many polypod balls I want to buy, debating between 2 or 3, so I can secret santa a few. Quote
renegadeleader1 Posted June 7, 2018 Posted June 7, 2018 12 hours ago, Duymon said: Ah man..... I want those three GM's updated so bad, though in 1/144 they'd be pretty petite :0 It's almost guaranteed we'll see the F91 ver MG Jegan in P-Bandai They wouldn't be that small. Canonically they're taller than the F91 and Victory, and we already got those in HGUC form. If you want something real tiny take a look at the 1/100 scale RXR-44 guntank also from the F91 line. It's the same height in 1/100 as the 1/144 scale Jamesgun. That means in 1/144 scale it would barely reach the knee of regular RGM-79! Quote
Duymon Posted June 7, 2018 Posted June 7, 2018 (edited) 14 hours ago, renegadeleader1 said: They wouldn't be that small. Canonically they're taller than the F91 and Victory, and we already got those in HGUC form. If you want something real tiny take a look at the 1/100 scale RXR-44 guntank also from the F91 line. It's the same height in 1/100 as the 1/144 scale Jamesgun. That means in 1/144 scale it would barely reach the knee of regular RGM-79! They had the HGUC Loto twinpack and those were tiny. I think ther'es even an R-44 convo kit to turn the loto into the F91 guntank. Would hate to work on something that small. Edited June 7, 2018 by Duymon Quote
Kelsain Posted June 13, 2018 Posted June 13, 2018 So here's a weird question: Does anyone know of some 3rd party hands that are pretty similar in size to the MG Dom? Other 1/100 hands seem way too small, and I need something of similar size for my 1/12 Space Marine project. I was just going to use the Dom hands, but I decided to finish this MG that's been on my pile for 15 years. Quote
electric indigo Posted June 14, 2018 Posted June 14, 2018 Bandai's large Builder's Parts hands are pretty big. https://hlj.com/product/BAN977921 Quote
Kelsain Posted June 14, 2018 Posted June 14, 2018 2 hours ago, electric indigo said: Bandai's large Builder's Parts hands are pretty big. https://hlj.com/product/BAN977921 Cool, thanks. I'll keep an eye out for those through other channels, or of they come back in stock @ HLJ before my next order. The marine project is stalled, because I got a little bored - so I'll put the Dom hands back on the Dom until I'm ready to get back into that one. Quote
seti88 Posted June 20, 2018 Posted June 20, 2018 (edited) wonder how does the wires work for the bits, i think all 6 connect to a holder which then connects to any display base? Edited June 20, 2018 by seti88 Quote
kajnrig Posted June 20, 2018 Posted June 20, 2018 P-Bandai Johnny Ridden's Gelgoog and P-Bandai Shin Matsunaga's Gelgoog Jaeger http://p-bandai.jp/item/item-1000126355/ http://p-bandai.jp/hobby/special-1000008945/ Quote
Duymon Posted June 20, 2018 Posted June 20, 2018 (edited) Is that the same old 2004 HGUC Gelgoog as a base for Shin? Edited June 20, 2018 by Duymon Quote
kajnrig Posted June 20, 2018 Posted June 20, 2018 It's fine. It's fiiiiine. It's fine. It's fine. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.