Big s Posted September 10 Posted September 10 1 hour ago, no3Ljm said: HGUC 1/144 Hi-Zack Custom (A.o.Z. Re-Boot) December 2024 Release September 10, 2024 Preorder Starts Y3060 Bandai Hobby Online Shop / P-Bandai Definitely getting one of these Quote
Big s Posted September 11 Posted September 11 Looks like tomorrow at the U.S. site for the preorder. It lists 9/11 9pm eastern time, I think that’s 6 over here on the west coast, but my math is always a little off.a bit pricey, but I’ve wanted one for a long time, although I would’ve preferred the zeta version, this redesign looks pretty mean. Just too bad it only looks like it has one set of hands Quote
no3Ljm Posted September 22 Posted September 22 HG 1/144 MURASAME KAI (Mobile Suit Gundam SEED Freedom) Quote
Big s Posted September 22 Posted September 22 1 hour ago, no3Ljm said: HG 1/144 MURASAME KAI (Mobile Suit Gundam SEED Freedom) Looks like Lego zeta Quote
Big s Posted September 26 Posted September 26 Looks like an upcoming girly Leo variant web exclusive most likely Quote
no3Ljm Posted September 27 Posted September 27 (edited) So I was able to get the reissue of Point Factory Metal Frame upgrade from Gundamit/ShowZ for my 12 y/o MG Nu Gundam ver.Ka. Most of the frame are now pre-built versus before you have to assemble it. The only downside of the reissue is that it didn't include the metal V fin antenna which I was actually hoping to get. I only snap built the parts onto the metal frame so not all of it are flushed. Some armor parts probably might need a bit of sanding so it can fit properly. The joints are so tight. Shoulder and feet are ratchet joints so that's good. I do really like the added weight to the kit afterwards making it feel like a Metal Build/Chogokin figure. Though the plastics are so thin compared to the Metal Builds. So yeah. The kit blends very well with the rest of my Metal Builds and the Chogokin RX-78. Too bad though that when I disassemble the armor parts on the arms from the original kit frame it's so fragile that it snapped, that's why the green parts are now exposed on the arm near the elbow joints as shown below. Which made me decide, I'll probably just get another kit if it's on sale. And sure enough that same night I made my decision I found a kit on eBay where the seller is selling it almost half the price. Probably some old stock that he has. Maybe. What's nice though is that he's also selling a HWS add-on parts which is a P-Bandai exclusive so I went and add that on my order as well hope that the metal frame can handle the extra weight after. Seller confirmed that everything is complete. So fingers crossed. 🤞 Once I receive it, I'll do some tweaking on the parts so it will be flushed to the metal frame. No painting. Just probably light panel lining, decals, and topcoat. I don't think this needed some extra detailing since it's already good enough as is for me besides my MB Hi-Nu and Chogokin RX-78. Edit: Any suggestion what glue I can use to glue the Gunpla plastics to metal? Is the Tamiya cement is good enough? Aside from the metal frame, I also have some metal exhaust parts that I want to put it as well. Thanks! Edited September 27 by no3Ljm Quote
Bobby Posted September 27 Posted September 27 4 hours ago, no3Ljm said: So I was able to get the reissue of Point Factory Metal Frame upgrade from Gundamit/ShowZ for my 12 y/o MG Nu Gundam ver.Ka. Most of the frame are now pre-built versus before you have to assemble it. The only downside of the reissue is that it didn't include the metal V fin antenna which I was actually hoping to get. I only snap built the parts onto the metal frame so not all of it are flushed. Some armor parts probably might need a bit of sanding so it can fit properly. The joints are so tight. Shoulder and feet are ratchet joints so that's good. I do really like the added weight to the kit afterwards making it feel like a Metal Build/Chogokin figure. Though the plastics are so thin compared to the Metal Builds. So yeah. The kit blends very well with the rest of my Metal Builds and the Chogokin RX-78. Too bad though that when I disassemble the armor parts on the arms from the original kit frame it's so fragile that it snapped, that's why the green parts are now exposed on the arm near the elbow joints as shown below. Which made me decide, I'll probably just get another kit if it's on sale. And sure enough that same night I made my decision I found a kit on eBay where the seller is selling it almost half the price. Probably some old stock that he has. Maybe. What's nice though is that he's also selling a HWS add-on parts which is a P-Bandai exclusive so I went and add that on my order as well hope that the metal frame can handle the extra weight after. Seller confirmed that everything is complete. So fingers crossed. 🤞 Once I receive it, I'll do some tweaking on the parts so it will be flushed to the metal frame. No painting. Just probably light panel lining, decals, and topcoat. I don't think this needed some extra detailing since it's already good enough as is for me besides my MB Hi-Nu and Chogokin RX-78. Edit: Any suggestion what glue I can use to glue the Gunpla plastics to metal? Is the Tamiya cement is good enough? Aside from the metal frame, I also have some metal exhaust parts that I want to put it as well. Thanks! I spy upgraded Lightning Shield for RX-93-2 Hi-Nu ... no more polka dotted debacle shield! Nice! Quote
no3Ljm Posted September 28 Posted September 28 1 hour ago, Bobby said: I spy upgraded Lightning Shield for RX-93-2 Hi-Nu ... no more polka dotted debacle shield! Nice! Thanks! Some of us posted some photos of it in the Metal Build thread. Quote
no3Ljm Posted October 3 Posted October 3 Can anyone suggest a fixed pose hands for MG RX-93 Nu ver.Ka? And where can I buy one? Thanks in advance. Also just wanted to share this while browsing eBay. Acrylic Wall Mount Stand compatible for 1/100 1/144 Gunplas. https://www.ebay.com/itm/125136515170 Quote
Big s Posted October 3 Posted October 3 1 hour ago, no3Ljm said: Can anyone suggest a fixed pose hands for MG RX-93 Nu ver.Ka? And where can I buy one? Thanks in advance. There used to be a set of 1/100 hands from Bandai that came in a few sizes for smaller suits to larger ones. I don’t know if you can still find those, but if not, there’s some 3D companies that sometimes print them like the ones available at newtype hobbies. Quote
no3Ljm Posted October 4 Posted October 4 6 hours ago, Big s said: There used to be a set of 1/100 hands from Bandai that came in a few sizes for smaller suits to larger ones. I don’t know if you can still find those, but if not, there’s some 3D companies that sometimes print them like the ones available at newtype hobbies. Thanks @Big s. I browsed Aliexpress and found this: https://www.aliexpress.us/item/3256807215881580.html. Looks like it only comes in one color, so I hope I can reuse the original white part for the back of the hand. Quote
twich Posted October 4 Posted October 4 On 9/22/2024 at 12:39 AM, no3Ljm said: HG 1/144 MURASAME KAI (Mobile Suit Gundam SEED Freedom) I really wish that they would make a metal build of this or at least a master grade! This has such Zeta vibes to it and the fact that it is a transformable mobile suit just drives right up my Macross Love vibes! The fact that this has only ever been an HG kit just stinks! Twich Quote
Big s Posted October 4 Posted October 4 17 hours ago, twich said: I really wish that they would make a metal build of this or at least a master grade! This has such Zeta vibes to it and the fact that it is a transformable mobile suit just drives right up my Macross Love vibes! The fact that this has only ever been an HG kit just stinks! Twich An mg kit seems a bit far off if it were ever to happen. Mg kits are so rare that I rarely feel like buying into the 1/100 scale. They rarely pick designs that I like, so I usually just look past the 1/100 stuff these days. Although there are a few designs that I’m surprised got an mg kit though like the seed Zakus and the Ginn although they really made the head way too small on the ginn Quote
Big s Posted October 8 Posted October 8 2 hours ago, no3Ljm said: HGCE Murasame Kai Boxart The box art looks better than the kit itself unfortunately. Quote
no3Ljm Posted October 9 Posted October 9 3 hours ago, Big s said: The box art looks better than the kit itself unfortunately. You know what, since I haven't seen the Freedom movie and just waiting for the home video release this December, I just hope these batches of Murasame Kai did create more damages in the movie than in the series. Quote
Big s Posted October 9 Posted October 9 1 hour ago, no3Ljm said: You know what, since I haven't seen the Freedom movie and just waiting for the home video release this December, I just hope these batches of Murasame Kai did create more damages in the movie than in the series. If you have Netflix, it’s on there along with all the other seed stuff. I’m about halfway through the first series on a rewatch since it’s been a long time and I’ll finish with the movie after all the shows Quote
no3Ljm Posted October 9 Posted October 9 (edited) 36 minutes ago, Big s said: If you have Netflix, it’s on there along with all the other seed stuff. I’m about halfway through the first series on a rewatch since it’s been a long time and I’ll finish with the movie after all the shows Wait. The Freedom movie is on Netflix now? Gonna watch it this weekend. Oh boy! Oh boy! Edit: Ok, I checked and it's just in English. I'll probably wait until it becomes available in Japanese too. Btw, thanks for the heads up too. Edited October 9 by no3Ljm Quote
Big s Posted October 9 Posted October 9 2 hours ago, no3Ljm said: Wait. The Freedom movie is on Netflix now? Gonna watch it this weekend. Oh boy! Oh boy! Edit: Ok, I checked and it's just in English. I'll probably wait until it becomes available in Japanese too. Btw, thanks for the heads up too. Honestly, I didn’t check the language selection on it, but I’m kinda surprised there aren’t more options Quote
Big s Posted October 9 Posted October 9 18 hours ago, no3Ljm said: Edit: Ok, I checked and it's just in English. I'll probably wait until it becomes available in Japanese too. Btw, thanks for the heads up too. Just checked the audio options out of curiosity and it’s really weird that there are only English options. They basically just have English or English with subtitles that are probably also in English. Definitely an odd one, then again the first seed series has weird audio incidents where the dub disappears for certain characters on a few episodes. Seed seems haunted or something on Netflix Quote
no3Ljm Posted October 10 Posted October 10 MG 1/100 GNY-001 Gundam Astraea + Proto GN Twin Broad Blade January 2025 Release October 10, 2024 Preorder Starts Y7150 Bandai Hobby Online Shop / P-Bandai Release Quote
Duymon Posted October 11 Posted October 11 On 10/3/2024 at 11:41 PM, no3Ljm said: Thanks @Big s. I browsed Aliexpress and found this: https://www.aliexpress.us/item/3256807215881580.html. Looks like it only comes in one color, so I hope I can reuse the original white part for the back of the hand. Man I wish Bandai would just do an update of all the older Kits and remove those stupid poseable finger hands from all their kits. So happy the current MG's all have solid hands Quote
no3Ljm Posted October 11 Posted October 11 39 minutes ago, Rock said: https://hobby.dengeki.com/event/2372651/ Nice to know that Dengeki site is back online. Quote
Big s Posted October 18 Posted October 18 Got through episode four of the new series on Netflix and while I’m not a fan of the Zaku designs, that Gundam is kinda likeable to me. But how about a kit for that GM. I thought that was a pretty cool redesign in my opinion Quote
Big s Posted October 21 Posted October 21 2 hours ago, no3Ljm said: HGCE 1/144 BLACK KNIGHT SQUAD CAL-RE.A Y3700 Not really a seed fan, but I kinda like this one. The antennas on the side of the head are really the only things I don’t really like the look of. I think it would look way better with just the one in the center. Quote
no3Ljm Posted October 21 Posted October 21 49 minutes ago, Big s said: Not really a seed fan, but I kinda like this one. The antennas on the side of the head are really the only things I don’t really like the look of. I think it would look way better with just the one in the center. Ah. More Sinanju head look. Though the center antenna need to be shorten a bit, right? Quote
Big s Posted October 21 Posted October 21 2 hours ago, no3Ljm said: Ah. More Sinanju head look. Though the center antenna need to be shorten a bit, right? That looks great in my opinion. Reminds me a bit of a mix between some of the seed stuff with some of the baddies from f-91, a sinanju and a Mandalorian all in one with a bit of a medieval flare. Quote
Big s Posted October 30 Posted October 30 Lots of stuff from the gundam front store getting preorders on the first at the p Bandai website. I’m super excited cause I finally get another shot at trying to get the hg torohachi and they’re also adding the Draken as well. Pretty much both the gundam kits I’ve really been wanting the most Quote
Big s Posted November 2 Posted November 2 Lucked out this time and got my preorders in for the torohachi and Draken kits. I really didn’t care about the other three pages of items that went up for preorder, just happy to get those two at slightly less than scalper prices Quote
Big s Posted November 3 Posted November 3 Torohachi sold out pretty quickly, but I guess the Draken isn’t as popular and still available Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.