regult Posted July 16, 2009 Posted July 16, 2009 RD VF-25: 14.5 cm tall Where did you get this size from? so far the intel we have suggests 125 mm, 12.5 cm...so it is 2 cm smaller than you suggest. I'd be happier if it was around 15-20 cm...or 1/100, what's the "real" size of a Q-rea anyway? Liking the metallic sheen they applied, it's quite subtle yet it is there. Really think the VF100s look lame in the paintjob area. Quote
Guest sh002 Posted July 16, 2009 Posted July 16, 2009 it looks like the konig is around 1/100 scale or is 1/100 scale and is slightly transformable or parts swappable. i might get it. what was wrong with yamato's version again? damn if that qrea was 1/100 scale i'd definitely get it. Quote
lechuck Posted July 16, 2009 Posted July 16, 2009 (edited) Where did you get this size from? so far the intel we have suggests 125 mm, 12.5 cm...so it is 2 cm smaller than you suggest. I'd be happier if it was around 15-20 cm...or 1/100, what's the "real" size of a Q-rea anyway? Liking the metallic sheen they applied, it's quite subtle yet it is there. Really think the VF100s look lame in the paintjob area. You know what, you are absolutely correct. I was messing about with my Alter Arbalest which is 14.5 cm tall, at the time of writing. So to do my calculations again: VF-25: 1590 cm RD VF-25: 12.5 cm Makes it 1/127.2 scale. König Monster is 29.78 m in bomber mode and that would make the toy around ~23.4 cm long. That size correlates more to the images, so I guess the <Side VF> stuff is actually in scale to each other. Sorry for the confusion. Edited July 16, 2009 by lechuck Quote
CF18 Posted July 16, 2009 Posted July 16, 2009 I only worry about Bandai may do the tamashii shop limited release with the monster. So far on this line there are two giants - the Gawain got a general release, but the Regnant is tamashii shop limited, like the DX super packs. Quote
Vifam7 Posted July 16, 2009 Posted July 16, 2009 You know what, you are absolutely correct. I was messing about with my Alter Arbalest which is 14.5 cm tall, at the time of writing. So to do my calculations again: VF-25: 1590 cm RD VF-25: 12.5 cm Makes it 1/127.2 scale. König Monster is 29.78 m in bomber mode and that would make the toy around ~23.4 cm long. That size correlates more to the images, so I guess the <Side VF> stuff is actually in scale to each other. Sorry for the confusion. GA Graphics says that all Side VF stuff will be in scale to each other. Specifically they'll be in scale in relation to the leading role mecha (ie. the VF-25). The Konig Monster is awaiting final approval from the licensor (BW/Kawamori). Quote
ntsan Posted July 16, 2009 Posted July 16, 2009 (edited) I will definitely buying the Monster! Wasn't there like 2 paints variation for monster? The SMS and Monster Girl? Edited July 16, 2009 by ntsan Quote
KiriK Posted July 16, 2009 Posted July 16, 2009 (edited) Q-Rea pics Edited July 16, 2009 by KiriK Quote
eugimon Posted July 17, 2009 Posted July 17, 2009 wow, that Q-rea looks great! Decent amount of detail and looks like some pretty good articulation. Thanks for posting those up Quote
Cent Posted July 17, 2009 Posted July 17, 2009 (edited) I like the VB-6 and all, but doesn't it seem like the feet are a little small relative to the torso? And the cannons arent quite as wide as I thought them to be. Looks a little different from this Nevermind, some comparing between the pics and the RD VB-6 looks completely different. The frontal knees are completely different, and the hind portion is different too. The torso is indeed too big, and the cannons are too small and short. Even the side turbines on the torso are misplaced and too small. This can either be for the sake of Bandai's kid-friendly philosophy, or the necessity to make it transformable, but it sure as hell isn't accurate. Ugh. Someone make a gerwalk only VB-6 or HWR already =/. Edited July 17, 2009 by Cent Quote
regult Posted July 17, 2009 Posted July 17, 2009 :lol: I knew somebody would come up with a lineart to model comparison and blast the crap out of the prototype/sample....just didn't know it would happen so quickly, in the same page! The Q-rea, whatever its shortcomings, is still looking good! There are not open cockpit pictures this time!? Quote
Lobizon Posted July 17, 2009 Posted July 17, 2009 (edited) Shinnakasu/Northrom Grumman VB-6 König Monster (2059)---> http://www.new-un-spacy.com/macrossf/vb-6-konig-mf.htm Sorry, no gerwalk pic Edited July 17, 2009 by Lobizon Quote
ff95gj Posted July 17, 2009 Posted July 17, 2009 I don't know... I don't know my Yamato Monster very well... I put it back into the box after a while (small living space...)... But the prototype RD Monster above looks strikingly similar to the Y Monster to me. I know we are talking about VB-6 all along and they should be similar... But it just looks THAT similar to me. Quote
macrossnake Posted July 17, 2009 Posted July 17, 2009 Ugh. Someone make a gerwalk only VB-6 or HWR already =/. Agree. And (Yamato/Bandai) please do a 1/60 Monster MkII. Quote
Cent Posted July 17, 2009 Posted July 17, 2009 Its just as inaccurate as the Yammie VB-6. It may be more posable though... But you're probably trading off battroid mode for it. Regardless, the shuttle mode is alright, but I could care less about Battroid. However, gerwalk NEEDS TO BE DONE RIGHT. Forget everything else, and just make ACCURATE GERWALK. Done. Sold like hotcakes. In fact, I think I'd pay for just an accurate static pose 1/100 scale Konig in Gerwalk. Quote
Lonely Soldier Boy Posted July 17, 2009 Posted July 17, 2009 I have my Köenig next to me and proportion-wise, the Yamato seems to be better (I'd like to see some side shots to be sure because for what we've seen, the RD could be longer than the pics show). Yamato's is a floppy mess and has those HUGE gaps at the wing roots, but lets bear in mind that it was taken from a garage model kit and turned into a toy. My biggest hope is that the Bandai version turns out more sturdy and locks together properly since it was conceived as a toy in the first place. Quote
anime52k8 Posted July 17, 2009 Posted July 17, 2009 I like the VB-6 and all, but doesn't it seem like the feet are a little small relative to the torso? And the cannons arent quite as wide as I thought them to be. Looks a little different from this Nevermind, some comparing between the pics and the RD VB-6 looks completely different. The frontal knees are completely different, and the hind portion is different too. The torso is indeed too big, and the cannons are too small and short. Even the side turbines on the torso are misplaced and too small. This can either be for the sake of Bandai's kid-friendly philosophy, or the necessity to make it transformable, but it sure as hell isn't accurate. Ugh. Someone make a gerwalk only VB-6 or HWR already =/. this isn't really a valid comparison though. the bandai VB-6 isn't based off the line art from the VF-X game. it's based off the CG model from frontier which has drastically different proportions from the original line art. Quote
eriku Posted July 17, 2009 Posted July 17, 2009 The Monster is something I hoped Bandai would do, so I'm thrilled to see they're already doing it. I like how it is looking so far. I wont buy it if there isn't a battroid mode though, that's my favorite. Quote
eugimon Posted July 17, 2009 Posted July 17, 2009 I think there is a battroid mode, why have that collapsible cockpit otherwise? Quote
Salamander Posted July 17, 2009 Posted July 17, 2009 I think there is a battroid mode, why have that collapsible cockpit otherwise? I wonder whether the cockpit rotates 180 degress into the fuselage to reveal the head on its flip-side... Quote
Lonely Soldier Boy Posted July 17, 2009 Posted July 17, 2009 I think there is a battroid mode, why have that collapsible cockpit otherwise? Also the shoulder assembly swings out. That'd be an unnecessary extra hinge if there wasn't a Battroid mode. Quote
eriku Posted July 17, 2009 Posted July 17, 2009 And there appears to be fingers at the ends of the arms. Quote
Cent Posted July 17, 2009 Posted July 17, 2009 Show or game or whatever, the VB-6 they have here just doesn't look as imposing as I remember it to be. I'm passing on this one. I'd rather get a DX Macross Quarter if I want something that looks bad ass. Quote
Lonely Soldier Boy Posted July 17, 2009 Posted July 17, 2009 I hope the knee caps go all the way up in Gerwalk mode this time, so they cover those ugly blocks that hold the upper legs like in the lineart. It's a tricky part, because they have to travel all the way up to the hips, but I hope Bandai makes the effort. Quote
GRAND CANNON Posted July 17, 2009 Author Posted July 17, 2009 (edited) Y'know......out of all of the Toy Show coverage, you'd think someone would have a freakin' pic of the -25s and the Q-Rea for a comparison. **EDIT** Of course, I find one after I post....... Small and grainy but has all, or part, of the <SIDE VF>s in the view. Not sure if the size between them is accurate, though...... Edited July 17, 2009 by GRAND CANNON Quote
Black Valkyrie Posted July 18, 2009 Posted July 18, 2009 I actually really like that metallic colour, especially on the VF-25G I agree but there no release date for Michael's valk. Quote
regult Posted July 18, 2009 Posted July 18, 2009 from the picture above it seems the VF-25 and the Q-rea are the indeed around the same height, the cannon at the back protruding a bit over the "head" but overall the same fuselage height...making it a really tiny Q-rea! Quote
Radd Posted July 18, 2009 Posted July 18, 2009 From that side-on picture it looks like the Bandai VB-6 is a lot stumpier than the Yamato version. The cannons, arms, and main body are all shorter, length-wise. The feet actually look a lot larger compared to the rest of the body than the Yamato version, with those proportions. Quote
GRAND CANNON Posted July 18, 2009 Author Posted July 18, 2009 Better pic of the bunch: As far as the size between the Q-Rea and VF-25, I've seen 15.5m for the VF-25's height and, although I haven't seen a height on the Q-Rea, the Q-Rau was shown at 16.75m. Maybe they're not that far off........don't know. Quote
anime52k8 Posted July 23, 2009 Posted July 23, 2009 CAD designs for the VB-6. looks like it will be 3 mode variable! If the final product looks better than the yamato toy, I'm all over this! Quote
Cent Posted July 23, 2009 Posted July 23, 2009 please give it the proper kneecaps in gerwalk. those are so cool T_T Quote
anime52k8 Posted July 23, 2009 Posted July 23, 2009 please give it the proper kneecaps in gerwalk. those are so cool T_T que? Quote
eriku Posted July 23, 2009 Posted July 23, 2009 CAD designs for the VB-6. looks like it will be 3 mode variable! If the final product looks better than the yamato toy, I'm all over this! Awesome, thank you for the pic! If this thing has tight joints and a sturdy construction it should blow Yamato's Monster out of the water. And it damn well better have a Ranka Monster Girl decal, either tampo painted on or on a sticker sheet. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.