azrael Posted May 14, 2009 Posted May 14, 2009 I'm splitting the talk from the 1/72 thread. Drool about it in here. Quote
Dobber Posted May 14, 2009 Posted May 14, 2009 Okie Dokie, I'll start! DROOOOOOL!!! I'm down for one variable or not. Problem is should I buy this one or wait for the inevitable VF-25S, or the VF-25 w/ super pack? Chris Quote
Ghostkiller Posted May 14, 2009 Posted May 14, 2009 (edited) Okie Dokie, I'll start! DROOOOOOL!!! I'm down for one variable or not. Problem is should I buy this one or wait for the inevitable VF-25S, or the VF-25 w/ super pack? Chris Wait Chris !! ahhhhhhhh a must have model here Is it confirmed somewhere that it is a 3 modes variable kit ??? kind of sad that my only 2 1/72 are not done and here comes the 1/48 version Edited May 14, 2009 by Ghostkiller Quote
jenius Posted May 14, 2009 Posted May 14, 2009 Someday, when I'm older and I have to sell off all my toys, I imagine setting up a little work bench and taking on modeling as a hobby. It's news like this that has me convinced that that is the road I will eventually go. Quote
aquilon Posted May 14, 2009 Posted May 14, 2009 Allright my first post! Good to see another Macross fighter in 1/48 my scale of choice....wish they'd do Destroids too.... I actually hope this kit doesn't transform. I'd rather Bandai do what Hasegawa does and make a very detailed and "accurate" fighter and battroid as separate kits and dump all the transforming parts. The kits'll be cheaper and most of us just leave the models in one configuration anyways. Quote
kanedaestes Posted May 14, 2009 Posted May 14, 2009 If it doesn't transform I will pass. From the pick unless they perfected the seems where parts move and separate it doesn't look like it transforms. It looks great, but I am not big on non transforming Macross models. Quote
Kicker773 Posted May 14, 2009 Posted May 14, 2009 wow ....i mean WOW.... gotta love it for the fact that it is a 1/48!! Quote
505thAirborne Posted May 14, 2009 Posted May 14, 2009 The fact that its a 1/48 makes my day, but the question, unless i missed something. Does this bad boy transform. Either way i'll get one, but if its variable, all the better!!! Just think of the custom 1/48 squadron you could make with these!! Quote
Dobber Posted May 14, 2009 Posted May 14, 2009 Allright my first post! Good to see another Macross fighter in 1/48 my scale of choice....wish they'd do Destroids too.... I actually hope this kit doesn't transform. I'd rather Bandai do what Hasegawa does and make a very detailed and "accurate" fighter and battroid as separate kits and dump all the transforming parts. The kits'll be cheaper and most of us just leave the models in one configuration anyways. Welcome to the board aquilon! I'm also a fighter mode guy and while I'd love this to be variable, I wouldn't mind it if it is just a straight fighter kit, it would probably help keep the cost down! Chris Quote
captain america Posted May 14, 2009 Posted May 14, 2009 I wouldn't mind it if it is just a straight fighter kit, it would probably help keep the cost down! Chris Given Bandai's predictable marketing nature, it wouldn't be a static display model, but likely a PG grade, as some of us have surmised.My guess is that the photo is of a quick stereolithography mock-up that they put out to gauge public reception. Quote
Dobber Posted May 14, 2009 Posted May 14, 2009 Probably so, anyone remember if this was the case with the 1/72 kit? Either way I'm happy and getting one! If it is indeed variable I hope they don't just scale up the 1/72 kit and add some improvements like a way to lock the legs and wings in fighter mode, fix the wing root guns (since they don't sit well in fighter mode, and have a way to mount the gun in fighter mode without need the stand peice. Chris Quote
Heavy Melder Posted May 14, 2009 Posted May 14, 2009 WHAT?? 1/48 VF-25? Seriously? Well damn. I'll need two dozen of those suckers. Quote
aquilon Posted May 14, 2009 Posted May 14, 2009 Welcome to the board aquilon! I'm also a fighter mode guy and while I'd love this to be variable, I wouldn't mind it if it is just a straight fighter kit, it would probably help keep the cost down! Chris Thank you for the greeting Dobber! Been a lurker on this forum for a couple of months after I found it by accident - definitely enjoying going through the threads.....now I have this hankerin' to dig up that old Arii 1/72 VF-1A Armored Battroid I built as a kid and re-build it.... Quote
azrael Posted May 14, 2009 Author Posted May 14, 2009 Given Bandai's predictable marketing nature, it wouldn't be a static display model, but likely a PG grade, as some of us have surmised.My guess is that the photo is of a quick stereolithography mock-up that they put out to gauge public reception. I won't be so quick to call it a PG unit since it's still a prototype. And Bandai does make large, non-PG models like this one: http://dalong.net/review/seed/le1/le1_p.htm Quote
SchizophrenicMC Posted May 14, 2009 Posted May 14, 2009 I came. Everywhere. That summer job may turn out very useful in the end. Quote
CF18 Posted May 15, 2009 Posted May 15, 2009 Yeah it is huge, compared to a 1/72 Let's assume it can transform, what can they improve over the 1/72? For me: As other mentioned, more latch to lock stuff in place. Opening canopy. That should be expected at this scale. Eliminate those 3D decal (Example: 1, 2). Posable hands and fingers. Quote
honkhet Posted May 15, 2009 Posted May 15, 2009 they could make better crotch locking mechanism for battroid mode, or more durable at least Quote
regult Posted May 15, 2009 Posted May 15, 2009 Yeah it is huge, compared to a 1/72 Let's assume it can transform, what can they improve over the 1/72? For me: As other mentioned, more latch to lock stuff in place. Opening canopy. That should be expected at this scale. Eliminate those 3D decal (Example: 1, 2). Posable hands and fingers. Those are not "decals" but "stickers", water slide decals conform much better than the stickers. Making it non-transformable, then it would only be a huge fighter only model from Bandai? much unlikely...but who knows? no other mode shown. Notice how the VF-27 mockup shown beside it had at least 2 out of 3 modes made, this 1/48 is fighter only and there is no other data available. Locking machanisms or magnets would be a MUST to a 1/48 transformable, bigger and heavier model, otherwise the mammoth would be just one big floppy mess! Quote
SchizophrenicMC Posted May 15, 2009 Posted May 15, 2009 Those are not "decals" but "stickers", water slide decals conform much better than the stickers. Making it non-transformable, then it would only be a huge fighter only model from Bandai? much unlikely...but who knows? no other mode shown. Notice how the VF-27 mockup shown beside it had at least 2 out of 3 modes made, this 1/48 is fighter only and there is no other data available. Locking machanisms or magnets would be a MUST to a 1/48 transformable, bigger and heavier model, otherwise the mammoth would be just one big floppy mess! Knowing Bandai, I expect a model I can fully play with when assembled. Further, I think if it's transformable, at that scale, we can expect to see the articulated fingers and gimmicks that don't even exist in the 1/60 scale. If this becomes, somehow, their first non-Gundam PG, I want it bad. PGs are so intricate with their little... Intricacies... They have super-tight joints that aren't too tight, but not too loose, and they hold together well, and... ME WANT! Quote
VF5SS Posted May 15, 2009 Posted May 15, 2009 Or it could just be a large scale model like most of their Gundam ship kits. Quote
Shin Densetsu Kai 7.0 Posted May 15, 2009 Posted May 15, 2009 Let's assume it can transform, what can they improve over the 1/72? For me: As other mentioned, more latch to lock stuff in place. Opening canopy. That should be expected at this scale. Eliminate those 3D decal (Example: 1, 2). Posable hands and fingers. Retractable landing gear that resembles the VF100's landing gear(looks "just right", not too long like the 1/72 model). Quote
anime52k8 Posted May 15, 2009 Posted May 15, 2009 If this becomes, somehow, their first non-Gundam PG, I want it bad. PGs are so intricate with their little... Intricacies... They have super-tight joints that aren't too tight, but not too loose, and they hold together well, and... ME WANT! The first PG kit WAS a non-Gundam kit. http://www.hlj.com/product/BAN58680 anyways. if it is a PG grade VF-25, I want it to have it come in full color. no having to make all the stripes and crap with decals. at PG level they should either be able to make the panels out of separate parts for each color or at least ship the parts pre-painted. I've got a PG GP-01 FB, it looks great but it's still a lot fiddlier and delicate than your average Yamato. the joints hold good for Poly caps and friction joints but it sill lacks ratchet joints and some of the smaller parts you have to worry about. Quote
azrael Posted May 15, 2009 Author Posted May 15, 2009 Or it could just be a large scale model like most of their Gundam ship kits. Don't worry, they're setting themselves up to be let down later. If it's not a PG-style kit, we can say "we told you". Quote
shiroikaze Posted May 15, 2009 Posted May 15, 2009 I won't be so quick to call it a PG unit since it's still a prototype. And Bandai does make large, non-PG models like this one: http://dalong.net/review/seed/le1/le1_p.htm Ah yes, I have that particular model kit. It's like a giant Master Grade with the poseability of a High Grade... with a lighting gimmick. Not the best purchase I ever made, I have to admit. Azrael might be right unfortunately... They just released the PG edition of Gundam Seed Red Astray so why would they releaes another PG so quickly afterwards? But we can all hope can we!? Quote
OmegaD3k Posted May 15, 2009 Posted May 15, 2009 (edited) I'll be laughing my head off if the Battroid mode looks exactly like the 1/60 Chunkykin counterpart. If that were the case, then this is a huge pass for me (in the very least it still would be cheaper!). Seriously, seeing how Bandai is VASTLY better at making model kits than toys, I expect this 1/48 to look nothing less short of the perfection of that which is its CGI counterpart. If it's so, then I'm glad I passed the DX line! Edited May 15, 2009 by OmegaD3k Quote
honkhet Posted May 15, 2009 Posted May 15, 2009 Seriously, seeing how Bandai is VASTLY better at making model kits than toys, I expect this 1/48 to look nothing less short of the perfection of that which is its CGI counterpart. If it's so, then I'm glad I passed the DX line! me too Quote
ntsan Posted May 15, 2009 Posted May 15, 2009 At 1/48 it should be in scale with Banpresto Klan right? Quote
honkhet Posted May 15, 2009 Posted May 15, 2009 i hope ur right about that it would be awesome, 1/48 vf-25G.. Quote
ntsan Posted May 15, 2009 Posted May 15, 2009 i hope ur right about that it would be awesome, 1/48 vf-25G.. Yeah, that will be the main reason for me to buy a 1/48! Quote
badboy00z Posted May 15, 2009 Posted May 15, 2009 The first PG kit WAS a non-Gundam kit. http://www.hlj.com/product/BAN58680 anyways. if it is a PG grade VF-25, I want it to have it come in full color. no having to make all the stripes and crap with decals. at PG level they should either be able to make the panels out of separate parts for each color or at least ship the parts pre-painted. I've got a PG GP-01 FB, it looks great but it's still a lot fiddlier and delicate than your average Yamato. the joints hold good for Poly caps and friction joints but it sill lacks ratchet joints and some of the smaller parts you have to worry about. I agree with the colored parts for the stripes. That was one of the things that kept me from getting the 1/72. Also the canopy frame (the black part which you usually have to mask and paint) and the actual canopy as 2 separate parts would be nice. Oh and movable control surface parts would be cool. Quote
edwin3060 Posted May 15, 2009 Posted May 15, 2009 I'll be laughing my head off if the Battroid mode looks exactly like the 1/60 Chunkykin counterpart. If that were the case, then this is a huge pass for me (in the very least it still would be cheaper!). Seriously, seeing how Bandai is VASTLY better at making model kits than toys, I expect this 1/48 to look nothing less short of the perfection of that which is its CGI counterpart. If it's so, then I'm glad I passed the DX line! You took the words right out of my mouth Quote
CF18 Posted May 15, 2009 Posted May 15, 2009 (edited) A few more photos at http://ga.sbcr.jp/mreport/012870/ http://www.geocities.jp/hobby_show_album/j...ka2009/0115.htm Edited May 15, 2009 by CF18 Quote
Vifam7 Posted May 15, 2009 Posted May 15, 2009 I don't think Bandai has ever released a kit of transformable mecha that doesn't transform. The only thing that might make this kit non-transformable would be if it was being released under the EX kits line. Which would also mean glue, putty, sanding, and paint required. EX kits are usually reserved for obscure or limited popularity stuff though. Quote
David Hingtgen Posted May 15, 2009 Posted May 15, 2009 Hmmn. Based on how PG Gundam eyes etc are molded, they very well could mold the clear canopy and the black frames together as a single part. Now, the question is if they'll actually make them purple this time around... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.