Mr March Posted March 17, 2009 Share Posted March 17, 2009 Hmmm, it doesn't work. Not sure what the problem is, but my media player says its an error. Quote Link to comment Share on other sites More sharing options...
shiroikaze Posted March 17, 2009 Share Posted March 17, 2009 (edited) Hmmm, it doesn't work. Not sure what the problem is, but my media player says its an error. You probably don't have the codec for it, it works for me and it looks good (though I only viewed it 3 times...) [edit] Actually I see the arms clipping through wings, how about swinging the arms out at an angle? Also for the fuselage, when goes into the chest, how about making it "pop" in instead of sliding in? Nevertheless AKT M, it's pretty darn awesome. Also, instead of rapidshare, why not use mediafire or megaupload? Edited March 18, 2009 by shiroikaze Quote Link to comment Share on other sites More sharing options...
SchizophrenicMC Posted March 17, 2009 Share Posted March 17, 2009 What is an NMC? If you're referring to the Battle class ships at the front of New Macross Class vessels, then refer to it as such. If you're referring to something else, take the time and type it all out. GOD DAMMIT! I said not to start that fight. I use NMC as a blanket term covering any of the battle class vessels. Shut up, Sketchley. Isn't the Main gun on an NMC a self contained ship? that would make things a bit easier, the gun can just sail itself into the NMC's hand. Exactly. It's the same concept: The gun doesn't move on some arm to the hand, rather the craft grabs it as it floats away. Quote Link to comment Share on other sites More sharing options...
sketchley Posted March 17, 2009 Share Posted March 17, 2009 GOD DAMMIT! I said not to start that fight. I use NMC as a blanket term covering any of the battle class vessels. Shut up, Sketchley. My, you're quite rude. It's bad enough to tell members to shut up, it's worse that you're assuming that you're made up term will be understood by everyone else. Jeez, grow up, grow a brain, and use one of the accepted terminology. Quote Link to comment Share on other sites More sharing options...
SchizophrenicMC Posted March 17, 2009 Share Posted March 17, 2009 My, you're quite rude. It's bad enough to tell members to shut up, it's worse that you're assuming that you're made up term will be understood by everyone else. Jeez, grow up, grow a brain, and use one of the accepted terminology. My MADE UP TERM? How many people on this forum use NMC? More than just me. And, for that matter, it's been in use since long before I was here. For quite some time, NMC WAS the accepted term. Now what? I'm sticking with my old blanket term, thank you. Moving the f*ck on, Does it really matter? My favorite gunpod to hand is Roy's in MacZero. It looks awesome and makes sense. I mean, maybe it's got Magic Hands. Quote Link to comment Share on other sites More sharing options...
Mr March Posted March 18, 2009 Share Posted March 18, 2009 Okay, the file works on my media player at home, but not at work. Weirdness. Anyway, thanks again akt_m. If you improve or update your animation, please let me know so I can update my site as well. Quote Link to comment Share on other sites More sharing options...
sketchley Posted March 18, 2009 Share Posted March 18, 2009 (edited) My MADE UP TERM? How many people on this forum use NMC? More than just me. And, for that matter, it's been in use since long before I was here. For quite some time, NMC WAS the accepted term. Now what? I'm sticking with my old blanket term, thank you. Yes, you're made up term. Or, if it works for you, if everyone jumps off of a bridge to their death, you'll be right there with them. Let me enlighten you: in one thread, we have NMCV. Wheither or not the term is valid or not is debatable, nevertheless, it is a term that has been used to nebulously describe the Battle Class ships. NMC is a term that doesn't exist in canon Macross, and is also easily confuseable with NMCV. When I read NMC, I thought you were referring to Battle 25, which is inaccurate, as the scene in question was on the surface of Island 1, which is not a New Macross Class emigration ship, let alone a NMCV ship, if NMCV proves to be canon. Therefore, being lazy and using a personal shorthand is wrong, and my request to spell things out. Of course, it is entirely up to you, but doing so will encourage others to jump off of bridges, further confuse things, and make your posts even more unintelligible. Edited March 18, 2009 by sketchley Quote Link to comment Share on other sites More sharing options...
Zinjo Posted March 18, 2009 Share Posted March 18, 2009 (edited) Isn't the Main gun on an NMC a self contained ship? that would make things a bit easier, the gun can just sail itself into the NMC's hand. Yes it is. It's called the "Gunship"... I agree with Sketchley in that if you are referring to the New Macross Battle Class/Carrier, then NMCV is a better way to describe it in shorthand... NMC has been used to described the whole colony ship as an acronym to New Macross Class colony ship, however the Frontier's acronym would actually be ICC for Island Cluster Class colony ship. Edited March 18, 2009 by Zinjo Quote Link to comment Share on other sites More sharing options...
SchizophrenicMC Posted March 18, 2009 Share Posted March 18, 2009 (edited) "Alto, I entrust this to you!" -Klan Klan Edited March 18, 2009 by SchizophrenicMC Quote Link to comment Share on other sites More sharing options...
akt_m Posted March 21, 2009 Author Share Posted March 21, 2009 Updated, did a new head, but after i rendered i realized that it is a little smaller than should be. http://rapidshare.com/files/211950905/VF25TEST4.avi Quote Link to comment Share on other sites More sharing options...
anime52k8 Posted March 21, 2009 Share Posted March 21, 2009 Updated, did a new head, but after i rendered i realized that it is a little smaller than should be. http://rapidshare.com/files/211950905/VF25TEST4.avi one thing to mention, the sheild is ending up on in the wrong spot. it should be on the side of the arm in battroid mode, not on the bottom. Quote Link to comment Share on other sites More sharing options...
akt_m Posted March 23, 2009 Author Share Posted March 23, 2009 (edited) Changed the shield, made the head a little bigger. I will try to render later... Thx for the tip! Edited March 23, 2009 by akt_m Quote Link to comment Share on other sites More sharing options...
Hikuro Posted March 27, 2009 Share Posted March 27, 2009 Very cool man, I really like how this is coming out. Keep me up to date if you need anything done from me to make it really awesome Quote Link to comment Share on other sites More sharing options...
akt_m Posted September 18, 2010 Author Share Posted September 18, 2010 (edited) Sorry for upping such and old topic. But i guess it is better than opening and new one. Does anyone know where i can find a video or pictures of a VF-25 toy inner transformations parts, i searched and could only find how it transformed from far, I have no idea how the head actually transforms. Also i'm upping the poly count, increased the details, fixing some large mistakes, it will take a long time, and i'm progressing very slowly. I had no idea how those vernies were in a close distance, so i just did it just like one sketch of it from the VF-1. Thx for any help; Edited September 18, 2010 by akt_m Quote Link to comment Share on other sites More sharing options...
frothymug Posted September 18, 2010 Share Posted September 18, 2010 AFAIK, the head doesn't really transform. It's already in the right spot. The section in front of the head basically folds downwards to latch onto the nose portion of the craft, which reveals the head for battroid use. Quote Link to comment Share on other sites More sharing options...
akt_m Posted September 18, 2010 Author Share Posted September 18, 2010 I wanted to know where the joints are located, to give a proper placement of the head at the end of the transformation. Quote Link to comment Share on other sites More sharing options...
akt_m Posted August 28, 2011 Author Share Posted August 28, 2011 (edited) I think i won't be modeling this anymore, but still i would like to see it completed, it is far from being really done, and a complete mess also. Also some of the small holes were just an alpha map, but i didn't add into this model version. http://hotfile.com/d...VF25_f.rar.html Edited August 28, 2011 by akt_m Quote Link to comment Share on other sites More sharing options...
akt_m Posted August 29, 2011 Author Share Posted August 29, 2011 if anyone ends up doing some renders pls post them here! =) Also now i saw that the transformation animation is all messed up, you may need to reset or correct everything, the fact is that i reused the same joints from the past model version, but they don't quite match everything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.