tekering Posted January 3 Share Posted January 3 So, I was initially excited when Robotech was announced for Blu-ray, because it meant the first time Southern Cross footage would be available in HD. We'd had Macross on Blu-ray for over a decade (and Mospeada for nearly that long), but Southern Cross barely even got a DVD release in Japan... and it was shovelware at best. Of course, as soon as "The Macross Saga" BDs came out, it was clear how little Funimation cared about image quality: I mean, compared to what we'd got in Japan ten years earlier... ...Robotech looked as grainy, high-contrast, oversaturated and blown-out as ever. 😒 Comparisons with Mospeada fared no better. So, with expectations at rock-bottom, I was in no hurry to see "The Robotech Masters" in HD... but my initial curiosity never entirely faded, and I did finally acquire the Blu-rays a few months back. The masters for "Masters" are just as poor quality as the other series, of course, but are they at least better than the DVDs were? As you may be aware, the ADV discs had terrible color timing, giving the whole series a heavy blue tint across the spectrum... Surprisingly, the color timing is a major improvement on Funimation's HD masters, with more accurate blacks and distinct color definition evident in every frame. In fact, there's a whole new magenta tone introduced to the image: It doesn't replace the blue, but rather adds an additional color layer. I thought this difference was profound, and felt compelled to show other Southern Cross fans... ...although I realize very few people will actually care. I mean, they're mastered from the same ancient 16mm prints Tatsunoko provided Harmony Gold four decades ago... ...and still show all the same flaws. If anything, physical damage to the film is even more evident in HD. Still, the improvement is undeniable. I thought it was worth sharing, anyway. 🤓 Quote Link to comment Share on other sites More sharing options...
jenius Posted January 3 Share Posted January 3 Thanks for sharing, those are unexpected results! Quote Link to comment Share on other sites More sharing options...
Big s Posted January 3 Share Posted January 3 Looks pretty surprising Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted January 3 Share Posted January 3 Thanks for sharing, @tekering! Quote Link to comment Share on other sites More sharing options...
derex3592 Posted January 3 Share Posted January 3 (edited) Thanks for sharing @tekering! I love video comparisons! @tekering - Burning question...Do the Blu-ray's have the ORIGINAL sound effect audio tracks or the HORRIBLE Robotech Remastered sound effect tracks? Edited January 3 by derex3592 Quote Link to comment Share on other sites More sharing options...
tekering Posted January 3 Share Posted January 3 18 minutes ago, derex3592 said: Do the Blu-ray's have the ORIGINAL sound effect audio tracks or the HORRIBLE Robotech Remastered sound effect tracks? It's all "Robotech Remastered," I'm afraid. The original mono audio tracks wouldn't sync up with the re-edited episodes anyway. None of the original commercial "bumpers" are included, either. 😒 Worse yet, the new opening sequences created for the "Remastered" DVDs didn't even get recreated in HD, simply upscaled from the DVD source. The openings are therefore of substantially lower quality than the episodes themselves. 🤨 Quote Link to comment Share on other sites More sharing options...
derex3592 Posted January 3 Share Posted January 3 @tekering - Thank you for the quick response. I was going to pickup all 3 of them up to get the better video quality if the original sound effects had been used. Bummer. I might still get "The Masters" - It's pretty cheap on Amazon right now. 50% off I think....making it like $35 or so. Quote Link to comment Share on other sites More sharing options...
shazam Posted January 9 Share Posted January 9 (edited) Edited January 9 by shazam Quote Link to comment Share on other sites More sharing options...
CaptRico Posted January 11 Share Posted January 11 I've actually been building Veritechs/Valkyries in Lego since I was a teen. And as of now, I actually have a Veritech Hovertank fully transformable into all three modes and poseable as a lego moc. But right now, I'm currently in the process of upgrading the design and color scheme to match an actual military design. These pics below show my current militart-style moc-up for the Hovertank MOC, and as of this writing, I've purchase all the parts I need to build it IRL, I'm just missing a few key parts which I'm currently waiting for arrival. Like my SV-303 Vivasats, I built the Hovertank moc in Bricklink Studio: Quote Link to comment Share on other sites More sharing options...
jenius Posted January 11 Share Posted January 11 Wow, that's very cool! Quote Link to comment Share on other sites More sharing options...
Big s Posted January 11 Share Posted January 11 That great Quote Link to comment Share on other sites More sharing options...
Spark-O-Matic Posted January 21 Share Posted January 21 Its coming soon at Gundamit Quote Link to comment Share on other sites More sharing options...
Big s Posted January 22 Share Posted January 22 7 hours ago, Spark-O-Matic said: Its coming soon at Gundamit It’s been coming sooon everywhere for the last year or so Quote Link to comment Share on other sites More sharing options...
Spark-O-Matic Posted January 22 Share Posted January 22 41 minutes ago, Big s said: It’s been coming sooon everywhere for the last year or so That's a negative there ghostrider. Just a heads-up It's a new listing and in the coming soon section not the preorder. Also they already sent me an email to pay the full balance. They only do that when expecting to ship out in the next few weeks. Quote Link to comment Share on other sites More sharing options...
shazam Posted January 22 Share Posted January 22 8 hours ago, Spark-O-Matic said: Its coming soon at Gundamit 41 minutes ago, Big s said: It’s been coming sooon everywhere for the last year or so Exactly. Every month leads into another year. February will be the next estimated date for release. The Dana Sterling figure might be jumping out of an Easter Egg when released. Quote Link to comment Share on other sites More sharing options...
derex3592 Posted January 22 Share Posted January 22 I'll believe it when I have it in my hands....🤔 Quote Link to comment Share on other sites More sharing options...
strikevalk Posted January 22 Share Posted January 22 sigh.... wish they could have mass produced this... or even a new Lunk figure in this scale... anything... Quote Link to comment Share on other sites More sharing options...
shazam Posted January 22 Share Posted January 22 2 hours ago, strikevalk said: sigh.... wish they could have mass produced this... or even a new Lunk figure in this scale... anything... 27 bids and $455 later someone had a new Dana Sterling figure. 🤩 I hope the KC figure is better than the images offered. I am still going to get this figure. It's the "when" am I going to get this figure. Quote Link to comment Share on other sites More sharing options...
strikevalk Posted January 22 Share Posted January 22 17 minutes ago, shazam said: 27 bids and $455 later someone had a new Dana Sterling figure. 🤩 I hope the KC figure is better than the images offered. I am still going to get this figure. It's the "when" am I going to get this figure. It's the "when", is the part we all share. For now, here's a Wen we can enjoy in the meantime. Quote Link to comment Share on other sites More sharing options...
CaptRico Posted January 28 Share Posted January 28 Made the Red Bioroid in LEGO. Tried to keep it in scale with my Hovertank MOC: Quote Link to comment Share on other sites More sharing options...
strikevalk Posted February 2 Share Posted February 2 thoughts on the box art? Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted February 2 Share Posted February 2 So it's going to be two different figures? One packed in the white outfit and the other one packed with the armor? (Note the typo on the box: "Amour") Quote Link to comment Share on other sites More sharing options...
shazam Posted February 2 Share Posted February 2 1 hour ago, strikevalk said: thoughts on the box art? So good to see this figure at last. 🤩 Quote Link to comment Share on other sites More sharing options...
shazam Posted February 2 Share Posted February 2 On 1/28/2024 at 9:35 PM, CaptRico said: Made the Red Bioroid in LEGO. Tried to keep it in scale with my Hovertank MOC: Nice work on both the Hover Tank and Bioroid. 🤩 Quote Link to comment Share on other sites More sharing options...
pengbuzz Posted February 2 Share Posted February 2 (edited) ... Edited February 4 by pengbuzz Quote Link to comment Share on other sites More sharing options...
Spark-O-Matic Posted February 3 Share Posted February 3 On 1/21/2024 at 7:09 PM, Spark-O-Matic said: That's a negative there ghostrider. Just a heads-up It's a new listing and in the coming soon section not the preorder. Also they already sent me an email to pay the full balance. They only do that when expecting to ship out in the next few weeks. No one's going to listen to you big dummy. That's what's going on. Quote Link to comment Share on other sites More sharing options...
Big s Posted February 3 Share Posted February 3 On 2/2/2024 at 1:46 AM, Convectuoso said: (Note the typo on the box: "Amour") Oddly she was supposed to be French although not in Robotech Quote Link to comment Share on other sites More sharing options...
Seto Kaiba Posted February 3 Share Posted February 3 1 hour ago, Big s said: Oddly she was supposed to be French although not in Robotech Not just French, her character started out as literal Joan of Arc. Quote Link to comment Share on other sites More sharing options...
tekering Posted February 18 Share Posted February 18 You may be interested in how the vintage LS figures scale with Kitz Concept's "Dana Sterling with Southern Cross Amour [sic]," if you're a modeller like me... Well, they don't. 😝 While the old model kits are barely 1:12th scale, Kitz Concept's Robotech figures are closer to 1:10th... ...although the male figures were so ridiculously large, Bowie actually scales better with Dana's figure than the armored Jeanne. 🤪 Quote Link to comment Share on other sites More sharing options...
shazam Posted February 18 Share Posted February 18 (edited) 6 hours ago, tekering said: You may be interested in how the vintage LS figures scale with Kitz Concept's "Dana Sterling with Southern Cross Amour [sic]," if you're a modeller like me... Well, they don't. 😝 While the old model kits are barely 1:12th scale, Kitz Concept's Robotech figures are closer to 1:10th... ...although the male figures were so ridiculously large, Bowie actually scales better with Dana's figure than the armored Jeanne. 🤪 The KC Dana figure looks great against the two models shown. Bowie is oversized for sure. Really liking the KC Dana figure in armor the more I see it. 🤩 Edited February 18 by shazam Quote Link to comment Share on other sites More sharing options...
Protoman Posted April 15 Share Posted April 15 3D print files for the Logan are now for sale. https://www.youtube.com/watch?v=i-usUxCc158 Quote Link to comment Share on other sites More sharing options...
shazam Posted April 15 Share Posted April 15 (edited) 1 hour ago, Protoman said: 3D print files for the Logan are now for sale. https://www.youtube.com/watch?v=i-usUxCc158 Good to see the Logan fighter produced as a transformable figure. Thanks for sharing. 🤩 Edited April 15 by shazam Quote Link to comment Share on other sites More sharing options...
CoryHolmes Posted April 16 Share Posted April 16 3 hours ago, Protoman said: 3D print files for the Logan are now for sale. https://www.youtube.com/watch?v=i-usUxCc158 I love this maligned mini-mecha more than most. It perfectly fits the narrative I've invented for my head-canon Second Generation. Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted April 16 Share Posted April 16 https://www.etsy.com/listing/1700500836/the-wolverine-robot-airplane-3d-printed Available on Etsy for those who don't have a 3D printer Quote Link to comment Share on other sites More sharing options...
tekering Posted April 17 Share Posted April 17 On 4/16/2024 at 7:35 AM, Protoman said: 3D print files for the Logan are now for sale. In anticipation of printing my own, I've prepared a painting guide color-matched to the Blu–rays: Incidentally, Marie's Logan is the only one to survive their debut appearance... These "cannon fodder" Logans are only briefly onscreen before they're destroyed, and after that Marie's is all we see for the rest of the series. 😅 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.