Steve68 Posted September 10, 2008 Posted September 10, 2008 Rainbowten does take paypal so I don't have to send them any credit card info at all. Steve
JLYC Posted September 10, 2008 Posted September 10, 2008 Damn it...I may have to try my hand at this kit. I typically avoid model kits (I would smoke EVERYONE in a 'worst' competition) but if this thing is a true plamo, a kit that can be assembled easily with pieces molded in different colors and played with, I just might have to cave and get one. It just looks too pretty. I did recently put together a Keroro Robo plamo from Bandai and the plastic quality surprised the hell out of me. Completed it feels far closer to a 'toy' than a 'model kit'. Plus I was pleased that it was a snap-kit because glue is something that should never find it's way into my hands. man..i hate you ...as would many other modellers as it's because of people like you that models are becoming more like snap-together toys nowadays (j/k..i'm just giving you a hard time lol) all kidding aside..i am actually very pleasantly surprised by how nice this kit turned out. As my life become more and more time-challenged I'm no longer totally averse to glue-free, seam-line-free models as long as the result is not compromised to make the build easier. I'd still paint that sucker before calling it a model though
LadyLuck® Posted September 10, 2008 Posted September 10, 2008 WOW nice pics!!! On some point I say the proportion is quite good, maybe because of the angled shot but well see hands on. Since it is still a kit, tranforming it always might worn out the joints(like my zeta, now mine Its forever in robot mode). But I like 3 modes. WTF need 3 kits??? Crapiest modeling contest-----I'm in
505thAirborne Posted September 11, 2008 Posted September 11, 2008 So that's what the final product looks like!! It looks amazing in Battroid mode, But I think I'll leave the landing gear up when I get mine, not too crazy about the wheels & struts...... But I'll have to wait and see up close how they look. Either way that is a sick looking Kit and I think that Hasegawa may get a little jealous from this one!!
CF18 Posted September 11, 2008 Posted September 11, 2008 Full set of the mecha pr0n: http://www.fig-soul.com/07/4543112555250.html
JLYC Posted September 11, 2008 Posted September 11, 2008 thanks for the link. the fighter is definitely the weakest..there are some very obvious gaps in the promo pics already and they'll probably be even bigger in 'real life'. the hinge on the wing is also very distracting. in battroid mode, flaws of the transformation gimmick is less obvious.
Hikuro Posted September 11, 2008 Posted September 11, 2008 Well damn that's not bad. Atleast it doesn't use swapping parts....not bad at all!
Valkyrie addict Posted September 11, 2008 Posted September 11, 2008 what are you guys expecting, it's a transforming model, of course there are going to be gaps, have you seen the Yamato toys PF valks, a complete gap fest... I think Bandai did a great job and the gaps are virtually impossible to avoid in transforming toys, if you don't want gaps, locked in fighter mode putty, fill, sand and presto, ahhaha can't wait to get this one on my hands
miriya Posted September 11, 2008 Posted September 11, 2008 From these final photos I have to say I am incredibly impressed with what Bandai has pulled off with this model. I love it.
VFTF1 Posted September 11, 2008 Posted September 11, 2008 Daaaaaaaaaaaaaaaaaamn! That is SWEET! I think I'm going to take the plunge and get it. I have never painted a model before... errr...then again...this isn't even snap-fit like the MGs is it? I am scared of handling this thing... But the finaly product looks sooooo beautiful! Well done Bandai. Pete
eyesonme78 Posted September 11, 2008 Posted September 11, 2008 Time to hunt for my VF-25 on sat at akiharbara!! muahahahaha...
Spitze Posted September 11, 2008 Posted September 11, 2008 I hereby post a challenge to kitbash a VF-25 to have swept-forward wings, either like the YF-19 or the VF-19F/S. Bonus points if they make it F/S style and still manage to mount super packs.
MechTech Posted September 11, 2008 Posted September 11, 2008 I gotta laugh. The tone of this thread has gone from doom and gloom to "I gotta get me one." I'm sure there will be variants to include armored ones! - MT
CF18 Posted September 11, 2008 Posted September 11, 2008 In this photo the unit is unpainted. So it come with a clear canopy and appears to come with two complete sets of decal - one sticker and one water slide.
Valkyrie addict Posted September 11, 2008 Posted September 11, 2008 (edited) wonder what are the 5 sticks pins/antennas atop the decal sheets for? Edited September 11, 2008 by Valkyrie addict
AcroRay Posted September 11, 2008 Posted September 11, 2008 Pretty! It also looks like it has some metal pins for some of the joints.
electric indigo Posted September 11, 2008 Posted September 11, 2008 wonder what are the 5 sticks pins/antennas atop the decal sheets for? I think these are metal axes for the swivel points of the transformation.
carzooyah Posted September 12, 2008 Posted September 12, 2008 Metal pins! Now I'm much more optimistic that the model CAN be handled like a toy. Bandai seems to have thought this out a bit. And the unpainted model looks fantastic! All it needs is just some light grey panel linings and it already looks awesome.
Major Focker Posted September 12, 2008 Posted September 12, 2008 thanks TSP. i already know of Toyzone and bought a battleship yamato and some 1/100 macross kits from there a few weeks ago. i'll check out the other stores you mentioned. didn't know sino centre had toy stores beyond the 6th floor. thanks again.
EXO Posted September 12, 2008 Posted September 12, 2008 Looks like it comes with an adapter forthe Bandai model base... pretty neat!
MechTech Posted September 12, 2008 Posted September 12, 2008 carzooyah, most of Bandai's kits have been made with ABS for the joints recently. My son's Votoms AT acts liek a toy with the detail of a model - without even painting it! Those metal pins would HAVE to go through ABS, styrene would bust (trust me on that one). I'll be getting one soon too. - MT
regult Posted September 12, 2008 Posted September 12, 2008 (edited) I gotta laugh. The tone of this thread has gone from doom and gloom to "I gotta get me one." I'm sure there will be variants to include armored ones! - MT well, just to throw some of that skepticism (negative energy?) back in the thread, I am still very troubled by the location of the nose gear, sometimes it appears in the right spot (aligned with the windshield), sometimes it shows waaaay too far forward. then, the model still sucks in fighter mode, because it cannot stay together without additional support supplied in the kit (problem can be noticed in the rear shot of the gerwalk mode, where the forward fuselage is drooping down. ...that being said, just like graham, I also have to get my vf-25 fix and can't wait for the DX version... looking at the non-transformable 1/100 Zaku II V2.0 Char Custom (the one that can superpose and even kneel down), I am confident the set is going to be at least decent and the build nice enough to go with the rest of the ever increasing mecha collection. (When are we going to get a Klan Klan Queadluun Rea from Bandai?? snap fit, glossy red, no transformation=no seams...just imagine that beauty!!!) Edited September 12, 2008 by regult
eriku Posted September 12, 2008 Posted September 12, 2008 So does anyone know if this is a snap kit or a glue kit? I know HLJ says it's a glue kit but they're not always accurate with their descriptions.
David Hingtgen Posted September 12, 2008 Posted September 12, 2008 Gah, this came up like 1 page ago. IGNORE HLJ, HLJ IS VERY OFTEN WRONG. It is snap together like every other Bandai mecha kit ever. I'm wondering what shipping will be---I currently have SAL selected from HLJ, but lately it seems that it's been taking a really long time. But I also don't want to spend 50%+ of the cost of the kit on EMS...
badboy00z Posted September 12, 2008 Posted September 12, 2008 well, just to throw some of that skepticism (negative energy?) back in the thread, I am still very troubled by the location of the nose gear, sometimes it appears in the right spot (aligned with the windshield), sometimes it shows waaaay too far forward. then, the model still sucks in fighter mode, because it cannot stay together without additional support supplied in the kit (problem can be noticed in the rear shot of the gerwalk mode, where the forward fuselage is drooping down. ...that being said, just like graham, I also have to get my vf-25 fix and can't wait for the DX version... looking at the non-transformable 1/100 Zaku II V2.0 Char Custom (the one that can superpose and even kneel down), I am confident the set is going to be at least decent and the build nice enough to go with the rest of the ever increasing mecha collection. (When are we going to get a Klan Klan Queadluun Rea from Bandai?? snap fit, glossy red, no transformation=no seams...just imagine that beauty!!!) Well the the landing gear bay doors open to allow the nose cone to fold into. If the doors are too far back (near the canopy), the nose cone won't reach. I think the inconsistency is due to animation errors.
electric indigo Posted September 12, 2008 Posted September 12, 2008 The lineart shows the gear in the aft of the landing gear bay, while on the kit it's in the middle, maybe for structural reasons.
David Hingtgen Posted September 12, 2008 Posted September 12, 2008 And if you pay attention to the launch sequences, the animation doesn't match either!
eriku Posted September 13, 2008 Posted September 13, 2008 Gah, this came up like 1 page ago. IGNORE HLJ, HLJ IS VERY OFTEN WRONG. It is snap together like every other Bandai mecha kit ever. I'm wondering what shipping will be---I currently have SAL selected from HLJ, but lately it seems that it's been taking a really long time. But I also don't want to spend 50%+ of the cost of the kit on EMS... Sorry, I skimmed over the last couple of pages but I didn't see anything about this kit being snap or glue. Thanks for the info, I'm glad to know it's a snap-kit. And I know HLJ is often wrong, which is why I asked. I forget which toy I bought from them a few years back but it was obviously just an action figure and they had it listed as a model that required glue to assemble.
Hikuro Posted September 13, 2008 Posted September 13, 2008 K.........I'm gonna buy this......maybe two........................................dammit.
David Hingtgen Posted September 13, 2008 Posted September 13, 2008 Remember people--the better this sells, the more likely we are to get a season 2, OVA, or movie of Frontier! TV shows are funded by their merchandise sales.
regult Posted September 13, 2008 Posted September 13, 2008 Well the the landing gear bay doors open to allow the nose cone to fold into. If the doors are too far back (near the canopy), the nose cone won't reach. I think the inconsistency is due to animation errors. The lineart shows the gear in the aft of the landing gear bay, while on the kit it's in the middle, maybe for structural reasons. And if you pay attention to the launch sequences, the animation doesn't match either! I did search for as many sequences showing the landing gear, and honestly, I don't think it ever showed up at the front of the bay doors...it simply doesn't look right. I also think it is due to some structural reason Bandai could not overcome, or maybe Kawamori-san isn't very clear on this kind of small details?! Maybe by moving the nose gear to the far front called for that extra support under the head. Will go searching for this kit downtown now, hopefully we already got them here in Hong Kong!
MechTech Posted September 13, 2008 Posted September 13, 2008 Thanks for posting the lineart! The gear is even chunky in the lineart! I guess its the additional armor on this valk. I know it sounds weird, but I've similar things with Miyataki's drawing too (mainly Daedalus/Promethius). They actually put a lot of thought into the design; they just didn't draw something and say, "this looks cool!" Animation has a lot of engineering errors in it! I learned NEVER to use animation screen shots except for color - and even then using several shots for consistency. - MT
badboy00z Posted September 13, 2008 Posted September 13, 2008 I don't think it has anything to do with structural integrity since you just remove the gear and close the doors. I don't imagine this kit to be very heavy either.
Recommended Posts